2007 FORD FUSION (AMERICAS) high beam

[x] Cancel search: high beam

Page 13 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual Low fuel (if equipped):
Illuminates when the fuel level in
the fuel tank is at or near empty
(refer toFuel gaugein this
chapter).
Speed control:Illuminates when
the speed control is engaged. Turns
off

Page 50 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual 5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamp switch to
. The headlamps
will turn off.
Foglamp control (if equipped)
With the ignition on

Page 51 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual High beams
Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.
Flash to pass
Pull toward you slightly to activate
and release to deactivate.
PANEL DIMMER

Page 52 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual Vertical aim adjustment
1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.
•(1) 8 feet (2.4 meters)
•(2) Center height of lamp t

Page 54 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp perfo

Page 55 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual 2. Reach over the front bolster.
3. Disengage top of flexible washer
bottle filler neck from snap strap
attachment and position it to gain
access path to the high beam bulb
(Passenger Side Only with A

Page 194 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual The fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
1 10A Backup lamps, Electrochromatic
mirror
2 20A Horns
3 15A Battery saver: Interior lam

Page 276 of 280

FORD FUSION (AMERICAS) 2007 1.G Owners Manual Engine oil ..................................232
change oil soon warning,
message center .......................232
checking and adding ..............232
dipstick ....................................2