2007 FORD FIESTA section 4

206-05-1 7 Parking Brake and Actuation 206-05-1 7
REMOVAL AND INSTALLATION
Parking Brake Control(l2 664 0)
Removal 5. Remove the parking brake control.
I. Remove the parking brake control trim panel.
Installation
2. Disconnect the parking brake warning I. To install, reverse the removal procedure.
indicator switch electrical connector.
2. Adjust the parking brake.
For additional information, refer to Parking
Brake Cable Adjustment in this section.
3. Disconnect the parking brake cable from the
parking brake control.
Discard the retaining clip.
I
4. Release the parking brake.
2006.0 Fiesta 1212006 Gl49893en
procarmanuals.com

206-06-1 Hydraulic Brake Actuation 206-06-1
SECTION 206-06 Hydraulic Brake Actuation
VEHICLE APPLICATION:2006.0 Fiesta
CONTENTS PAGE
SPECIFICATIONS
Specifications.. ........................................................................\
............................................ 206-06-2
DESCRIPTION AND OPERATION
.............................................. Hydraulic Brake Actuation - Vehicles Built Up To: 01/2004 206-06-3
Brake pedal.. ........................................................................\
.............................................. 206-06-3
DIAGNOSIS AND TESTING
........................................................................\
.......................... Hydraulic Brake Actuation 206-06-5
REMOVAL AND INSTALLATION
........................................................................\
.............. Brake Pedal - RHD (1 2 333 0) 206-06-6
....................................................................... \
Brake Master Cylinder - RHD (12 343 0) 206-06-8
procarmanuals.com

206-06-5 Hydraulic Brake Actuation 206-06-5
DIAGNOSIS AND TESTING
Hydraulic Brake Actuation
REFER to Section 206-00 [Brake System -
General Information].
2006.0 Fiesta 1212006 GI 7506en
procarmanuals.com

206-06-8 Hydraulic Brake Actuation 206-06-8
REMOVAL AND INSTALLATION
Brake Master Cylinder - RHD(12 343 0)
Removal 4. Tighten the bleed nipple. \,
All vehicles
CAUTI0N:lf brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold water.
I. Disconnect the brake vacuum pipe from the
brake booster.
I. Unclip the brake vacuum pipe.
2. Disconnect the brake vacuum pipe.
6. Install the brake fluid reservoir cap.
7m &AUTION:C~~ the brake tubes to prevent
fluid loss or dirt ingress.
Disconnect the brake tubes from the brake
master cylinder.
2. Disconnect the battery ground cable. For
additional information, refer to
Section
414-01 [Battery, Mounting and
Cables].
3. Remove the windshield wiper motor
assembly. For additional information, refer
to Section
501 -1 6 [Wipers and Washers].
4m &AUTION:T~~ brake fluid reservoir cap
must not become contaminated.
Vehicles with anti-lock brakes
Remove the brake fluid reservoir cap.
5. N0TE:lt will be necessary to carry out this 8m &AUTION:C~~ the brake tubes to prevent
fluid loss or dirt ingress.
step on both sides in order to completely
drain the brake fluid reservoir.
Drain the brake fluid reservoir.
1. Connect one end of a suitable piece of clear
plastic pipe to the bleed nipple and place the
other end into a suitable container.
2. Loosen the bleed nipple.
3. Depress the brake pedal until all the fluid is
drained from the brake fluid reservoir.
2006.0 Fiesta 1212006 ~89191 en
procarmanuals.com

206-0619 Hydraulic Brake Actuation 206-0619
REMOVAL AND INSTALLATION
Disconnect the brake tubes from the brake 11. Disconnect the low brake fluid warning
master cylinder. indicator switch electrical connector.
I
All vehicles
9m &AUTION:C~~ the clutch master cylinder
feed hose to prevent fluid loss or dirt
ingress.
Disconnect the clutch master cylinder feed
hose from the brake fluid reservoir.
12. Remove the brake master cylinder and
brake fluid reservoir assembly.
Installation
A CAUTI0N:Make sure the brake master
cylinder vacuum seal is correctly
positioned before installation.
I. To install, reverse the removal procedure.
2. Bleed the brake system. For additional
information, refer to Section
206-00 [Brake
System
- General Information].
10. Detach the brake master cylinder from the
brake booster.
2006.0 Fiesta 1212006 G89191 en
procarmanuals.com

206-0717 Power Brake Actuation 206-07-7
DIAGNOSIS AND TESTING
Power Brake System
( , REFER to Section 206-00 [Brake System -
General Information].
2006.0 Fiesta 1212006 GI 751 9en
procarmanuals.com

206-09A-1 Anti-Lock Control 206-09A-I
SECTION 206-09A Anti-Lock Control
CONTENTS
PAGE
SPECIFICATIONS
........................................................................\
.............................................. Specifications 206-09A-2
DESCRIPTION AND OPERATION
........................................................................\
......................................... Anti-Lock Control 206-09A-3
........................................................................\
..................................................... Overview 206-09A-3
Function
........................................................................\
...................................................... 206-09A-3
Anti-Lock Control
........................................................................\
........................................ 206-09A-5
MK70 Anti-lock Brake System (ABS) ........................................................................\
......... 206-09A-5
........................................................................\
.................................................. MK60 ABS 206-09A-5
DIAGNOSIS AND TESTING
........................................................................\
........................................ Anti-Lock Control 206-09A-7
........................................................................\
.......................... Inspection and Verification 206-09A-7
REMOVAL AND INSTALLATION
......................................... Hydraulic Control Unit (HCU) -- Vehicles Built Up To: 0512004 206-09A-8
.......................................... Hydraulic Control Unit (HCU) -- Vehicles Built From: 0512004 206-09A-11
Anti-Lock Brake System (ABS) Module -- Vehicles Built Up To: 0512004 ......................... 206-09A-14
.......................... Anti-Lock Brake System (ABS) Module -- Vehicles Built From: 0512004 206-09A-17
........................................................................\
..... Rear Wheel Speed Sensor
(12 785 0) 206-09A-20
Rear Wheel Speed Sensor Ring
................................................................... (12 788 0) 206-09A-22
Front Wheel Speed Sensor
........................................................................\
.... (12 784 0) 206-09A-24
procarmanuals.com

206-09A-7 Anti-Lock Control 206-09A-7
DIAGNOSIS AND TESTING
Anti-Lock Control
, Refer to Wiring Diagrams Section 206-09A, for
schematic and connector information.
General
Equipment
I Worldwide diagnostic system (WDS) I
Inspection and Verification
I. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical
or electrical damage.
Visual Inspection Chart
I Mechanical I Electrical I
3. If an obvious cause for an observed or reported
concern is found, correct the cause (if possible)
. before proceeding to the next step.
sensor(s)
Wheel speed sensor
ring (s)
I '4. If the cause is not visually evident, connect the
diagnostic tool to the data link connector and
select the vehicle to be tested from the
diagnostic tool menu.
Fuse(s)
Electrical
connector(s)
Wiring harness(s).
2006.0 Fiesta 1212006 G325340en
procarmanuals.com