2007 FORD EXPEDITION reset

[x] Cancel search: reset

Page 26 of 328

FORD EXPEDITION 2007 3.G Owners Manual 7.SHUFFLE:In CD/MP3 mode,
press SHUFFLE to engage shuffle
mode. SHUFFLE ON will appear in
the display. If you wish to engage shuffle mode right away, press SEEK
to begin random play. Otherwise, random

Page 29 of 328

FORD EXPEDITION 2007 3.G Owners Manual 2.MUTE/: Press to mute the
playing media. Press again to return
to the playing media.
3.MENU:Press repeatedly to
access to the following settings:
CATEGORY (satellite radio if
equipped):Press MENU unt

Page 32 of 328

FORD EXPEDITION 2007 3.G Owners Manual 6.(Play/Pause):This control
is operational in CD and DVD mode
(if equipped). When a CD or DVD is
playing in the FES system, press this control to play or pause the
current CD/DVD. The CD/DVD status wi

Page 33 of 328

FORD EXPEDITION 2007 3.G Owners Manual memory presets, tune to the desired channel then press and hold a
preset control until sound returns.
Satellite radio is available only with a valid SIRIUS subscription.
Check with your authorized dea

Page 34 of 328

FORD EXPEDITION 2007 3.G Owners Manual 17.LOAD:Toloadadiscintothe
system, press LOAD. Select a slot
number using memory presets 1–6.
When the display reads LOAD CD#,
load the desired disc, label side up.
If you do not choose a slot withi

Page 37 of 328

FORD EXPEDITION 2007 3.G Owners Manual 2.VOLUME:Press to increase () or decrease () the volume level
in the headphones.
From the rear seat controls, volume control can be set no higher than
the current radio setting unless the speakers are

Page 38 of 328

FORD EXPEDITION 2007 3.G Owners Manual •Use the other controls to make adjustments to the playing media.
•Dual Play mode may also be
activated by pressing memory
presets 2 and 4 simultaneously on
the front audio controls.
The rear spea

Page 72 of 328

FORD EXPEDITION 2007 3.G Owners Manual Powerfold mirrors (if equipped)
Rotate the 4–way adjustment switch
to the center position. Press the
switch down to auto fold in and
down again to auto fold back to
design position. Powerfold the si