2007 FIAT PANDA key

4
GEAR LEVER
The gear lever (A) is located on the dashboard and it is of the floating
“multi-stable position” type, i.e.: it features three stable positions and
three unstable ones.
The three stable positions correspond to neutral (N), reverse (R) and
central position set between the unstable positions UP (+) and DOWN
(–) (see figure).
Unstable positions (i.e.: positions abandoned as soon as the gear lever is
released), are the upshifting position UP (+), the downshifting position
DOWN (–) and the automatic mode position (A/M).
To return to manual mode, set the gear lever back to A/M.
With the car stationary and the key removed, it is possible to shift the
lever with/without the brake pedal pressed. The system will perform no
actuation when shifting the lever and the gear engaged will be the one
stored before removing the ignition key.
IMPORTANT With the engine off and the car stationary, any error
between lever position and gear engaged is indicated by warning light (è)
coming on for a few seconds on the instrument panel together with the
message on the reconfigurable multifunction display.
F0G0511m
F0G0514m
603.83.448 PANDA DUAL GB 26-06-2007 11:11 Pagina 4

8
ENGAGED GEAR DISPLAYING
One second after turning the ignition key to MAR, the gear engaged and
the last operating mode adopted (AUTO or MANUAL) will be displayed
on the reconfigurable multifunction display:
N = neutral;
1 = first gear;
2 = second gear
3 = third gear;
4 = fourth gear;
5 = fifth gear;
R = reverse.
If the ECO function is on, the reconfigurable multifunction display will
show E (Economy) next to the gear engaged.
IMPORTANT If after 10 seconds (with ignition key to MAR) the display
does not show the gear engaged, turn the ignition key to STOP and wait
for the display to turn off, then repeat system switch on. If the fault
persists, contact Fiat Dealership.
F0G1185g
F0G1184g
603.83.448 PANDA DUAL GB 26-06-2007 11:11 Pagina 8

12
“DUALOGIC” TRANSMIS. FAIL. (red)
Turning the ignition key to MAR the warning light
on the cluster shall come on, but it should go off as
soon as the engine is started.
The warning light comes on flashing on the cluster
(together with the message on the reconfigurable
multifunction display and the buzzer) to indicate a
gearbox failure.
Message on reconfigurable
multifunction display Warning light
on dial
In the case of a gearbox fault, contact Fiat Dealership as soon as possible to have
the system checked.IMPORTANT
t
WARNING LIGHTS AND MESSAGES
603.83.448 PANDA DUAL GB 26-06-2007 11:11 Pagina 12

22
TOWING THE CAR
Make sure that the gearbox is in neutral (N) (checking
that the car moves if pushed) and tow as for a car with
traditional mechanical gearbox (see Owner
Handbook).
Should it be impossible to set to neutral, do not tow
the car and contact Fiat Dealership.
IF A FUSE BLOWS
FUSE AMPERE
Dualogic gearbox fuse box F84 15
Dualogic gearbox oil pump F83 30
Dualogic gearbox fuse box
power supply (+ key) F16 7.5
For fuse location see pictures in paragraph “If a fuse blows” in
section “In an emergency” in the Owner Handbook.
603.83.448 PANDA DUAL GB 26-06-2007 11:11 Pagina 22