11
FIAT PANDA 4 x 4
ASSEMBLY DIAGRAM, fig. 24
The tow hook structure must be fastened
in the points identified by symbol Øus-
ing a total of 4 M8 screws and 2 M12
screws. Internal plates 1 thickness shall be
6mm. The hook should be fastened to the
body avoiding any type of drilling and trim-
ming of the rear bumpers that remains vis-
ible when the hook is removed.
IMPORTANT It is compulsory to fasten,
at the same height as the tow hook and
in a clearly visible position, a label of suit-
able size and material with the following
information: MAX LOAD ON BALL 60 kg
After fitting, screw holes shall be sealed to
prevent an exhaust gas inlet.
fig. 24F0G0266m
existing screw
existing hole
existing hole
standard tow ball existing hole
existing
screw
existing hole
603.83.460 PANDA 4X4 GB 26-06-2007 11:19 Pagina 11
