PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Fiat has been developing its global commitment towards the safeguarding and protection of the Environment through
the continuous improvement of its production processes and the making of increasingly more “eco friendly” products. With a view
to guaranteeing the best possible service to clients in full observance of environmental standards and in response to the obligations
imposed by European Directive 2000/53/EC on end-of-life vehicles, Fiat offers its clients the possibility to hand in their vehicle* at
the end of its life span without additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same incurring
expenses due to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of the countries of the
European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehicles registered from 1 July 2002
on, while, from 2007 on, take-back will be carried out free of charge, independently of the year of registration, provided that the
vehicle still contains all its essential component parts (especially engine and body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality service to our
customers by de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find out the location of your
nearest authorised treatment facility, offering free of charge take-back, simply contact one of our dealers or refer to the Fiat web
site or call the toll free number 00800 3428 0000.
*
Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t
FUEL TANK CAPACITY (litres)
Tank capacity Reserve
100 16V - JTD 120 63 7
Only refuel cars with petrol engines with unleaded petrol with octane rating (RON) not less than 95
Diesel fuel for motor vehicles (EN 590 Specification)
Fiat Group Automobiles S.p.A.
Servizi al Cliente - Assistenza Tecnica - Ingegneria Assistenziale
Largo Senatore G. Agnelli. 5 - 10040 Volvera - Torino (Italia)
Print N. 603.81.217 - 11/2007 - 1
stedition
COLD TYRE PRESSURE (bar)
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm.Recheck pressure value with cold tyres.
Space-saver
spare wheelTyre From 1 person
(driver)
to 4 people
plus 40 kg load
(arranged in the boot)From 4 people plus
40 kg load up to
a maximum of
6 people plus 60 kg
load (arranged
in the boot)1 person (driver) plus 500 kg
load (arranged in the boot
obtained by removing the
rear seats, without exceed-
ing the max. admitted load
on the rear axle)
ENGINE OIL CHANGE
Engine sump Engine sump and filter 1st in-factory filling
10016V3.5 3.8 4.5
JTD 120 4.2 4.5 4.98
Front Rear Front Rear Front Rear
185/65 R15 88H 2.3 2.3 2.5 2.5 2.5 3.0 4.2
195/60 R15 88H 2.3 2.3 2.5 2.5 2.5 3.0 4.2
205/45 R17 88V 2.7 2.7 2.8 2.9 2.7 2.9 4.2
