2007 FIAT GRANDE PUNTO ECO mode

3
HOW TO MOVE OFF
MANUAL MODE
IMPORTANT To use the system proper-
ly, you are recommended to press ped-
als with the right foot only.
❒Press the brake pedal.
❒Start the engine.
❒Move the gear lever to + (UP) fig. 1to
engage the first gear (if the gear lever is
at Nor Rjust move the gear lever to
central position) or to R fig. 2to en-
gage reverse.
❒Release the brake pedal and press the
accelerator pedal.
❒When running move the gear lever to
+(UP) fig. 1for upshifting or to –
(DOWN) fig. 1for downshifting.
DUALOGIC GEARBOX
The car is fitted with a mechanical gear-
box with electronic control called “Dua-
logic” that can work in two operating
modes: MANUALand AUTO.
This gearbox consists of a conventional
mechanical transmission with gearshift
lever A-fig. 1, to which an electronical-
ly-operated electrohydraulic device has
been added which controls automatically
the clutch and gear engagement.
fig. 1F F0
0M
M0
02
27
70
0m
m
fig. 2F F0
0M
M0
02
27
71
1m
m
603_83_378 Punto Dual GB 19-06-2007 14:32 Pagina 3

4
AUTOMATIC MODE
IMPORTANT To use the system proper-
ly, you are recommended to press ped-
als with the right foot only.
❒Press the brake pedal.
❒Start the engine.
❒Move the gear lever to A/M
fig. 3to engage the automatic mode or
to R-fig. 2to engage reverse.
❒Release the brake pedal and press the
accelerator pedal.
OPERATION
The gearbox can work in two operating
modes:
❒the first mode is manual (MANUAL):
the driver directly requests gearshift-
ing;
❒the second mode is automatic (AU-
TO): the system directly decides when
shifting gears. With this operating log-
ic it is possible to activate the ECO
(Economy) function to contain con-
sumption by pressing button E-fig. 4
set on the instrument panel. To shift
gears and to select the operating mode
(MANUALor AUTO) use the gear
lever with whatever speed. fig. 3F F0
0M
M0
02
27
72
2m
mfig. 4F F0
0M
M0
02
27
73
3m
m
GEAR LEVER
The gear lever A-fig. 1is located on the
central console and it is of the floating
“multi-stable position” type, i.e.: it features
three stable positions and three unstable
ones.
The three stable positions correspond to
neutral N-fig. 2, reverse R-fig. 2and cen-
tral position set between the unstable po-
sitions UP (+) and DOWN (–)fig. 1.
Unstable positions (i.e.: positions aban-
doned as soon as the gear lever is released)
are the upshifting position UP (+), the
downshifting position DOWN (–) and the
automatic mode position (A/M) fig. 3.
603_83_378 Punto Dual GB 19-06-2007 14:32 Pagina 4

5
To return to manual mode, set the gear
lever back to A/M.
With the car stationary and the key re-
moved, it is possible to shift the lever
with/without the brake pedal pressed. The
system will perform no actuation when
shifting the lever and the gear engaged will
be the one stored before removing the ig-
nition key.
IMPORTANT With the engine running, any
error between lever position and gear en-
gaged is indicated by a buzzer sounding un-
til restoring proper condition.MANUAL OPERATION
(MANUAL)
In this operating mode, the decision to
change gear is left to the driver who de-
cides the most appropriate moment.
To change gears in MANUAL operating
mode proceed as follows:
❒move the gear lever to +(UP)
fig. 1to engage higher gear;
or
❒move the gear lever to –(DOWN)
fig. 1to engage lower gear.
When shifting gears it is not necessary to
release the accelerator pedal.
The system will cut in preventing gearshift-
ing if the request to change gear could im-
pair regular operation of engine and trans-
mission.
The system will warn the driver that the
required gear will not be engaged through
the sound of the buzzer and a dedicated
message on the reconfigurable multifunc-
tion display (see paragraph “Warning
lights and messages”).
The system will shift gears automatically
when the engine reaches idle rpm (e.g.:
at slowing down).Do not rest your hand on the
gear lever when your are not
shifting gears or if you are in
Auto/Manual mode.
AUTOMATIC OPERATION
(AUTO)
For engaging/disengaging the automatic
operating mode (AUTO), move lever to
A/M fig. 3: automatic mode activation is
indicated by message AUTO fig. 5and
gear engaged on the reconfigurable multi-
function display.
fig. 5F F0
0M
M1
10
01
17
7g
g
603_83_378 Punto Dual GB 19-06-2007 14:32 Pagina 5

6
Do not rest your hand on the
gear lever when your are not
shifting gears or if you are in
Auto/Manual mode.Automatic operation
(AUTO - ECO)
The ECOfunction can be activated only
with automatic mode active.
To activate the ECOfunction press but-
ton E-fig. 4located on the instrument
panel. After activating this function, the re-
configurable multifunction display shows
the gear engaged and words AUTOand
E(see next paragraph).
With ECOfunction active the system will
select the most suitable gear (according to
car speed, engine rpm and how the accel-
erator pedal is pressed) to save as much
fuel as possible.
If necessary (e.g.: overtaking), after press-
ing the accelerator pedal fully down, the
system will change gears in order to pro-
vide suitable torque and power for accel-
eration (this will take place in automatic
mode regardless of ECOfunction con-
dition, ON or OFF).
With AUTOmode active, the system de-
cides to change gear depending on car
speed, engine rpm and how the accelera-
tor pedal is pressed. It is however possi-
ble to change gears with the control lever
without deactivating the automatic mode:
this function called “gear advice” suspends
the automatic mode for the time required
to change gear.ENGAGED GEAR DISPLAYING
One second after turning the ignition key
to MAR, the gear engaged and the last op-
erating mode adopted (AUTOor
MANUAL) will be displayed on the re-
configurable multifunction display:
N= neutral;
1= first gear;
2= second gear;
3= third gear;
4= fourth gear;
5= fifth gear;
6= sixth gear (Multijet version);
R= reverse.
603_83_378 Punto Dual GB 19-06-2007 14:32 Pagina 6

10
WARNING LIGHTS
AND MESSAGESREDUCE GEARS
Warning light comes on (together with
the message on the reconfigurable multi-
function display) to warn the driver of the
incorrect use of the gearbox.
In this event, the system could automati-
cally activate system protection proce-
dure.MANUAL MODE NOT
AVAILABLE
The message on the reconfigurable mul-
tifunction display comes on when, with en-
gine on, the MANUALmode cannot be
selected. “DUALOGIC”
TRANSMISSION
FAILURE (red)
Turning the ignition key to MAR
the warning light shall come on, but it
should go off a few seconds after.
The warning light comes on flashing on the
cluster (together with the message on the
reconfigurable multifunction display and
the buzzer) to indicate a gearbox failure.
t
In the case of a gearbox
fault, contact Fiat Dealer-
ship as soon as possible to
have the system checked.
If the warning light continues
to stay on (together with the
message on the reconfig-
urable multifunction display),
contact Fiat Dealership.If the message on the recon-
figurable multifunction dis-
play continues to stay on,
contact Fiat Dealership.
603_83_378 Punto Dual GB 19-06-2007 14:32 Pagina 10

11
AUTOMATIC MODE NOT
AVAILABLE
The message on the reconfigurable mul-
tifunction display comes on when, with en-
gine on, the AUTOmode cannot be se-
lected.CLUTCH OVERTEMPERATURE
The message on the reconfigurable mul-
tifunction display comes on together with
the buzzer to indicate clutch overheating.
In this event, reduce gears and stop the
car (turning the engine off) until regular
operating conditions are restored.PUSH BRAKE PEDAL - DELAYED
STARTUP
Messages are displayed in turns and in se-
quence on the reconfigurable multifunc-
tion display, together with the buzzer to
indicate brake pedal failure when trying to
start the engine.
IMPORTANT Messages are displayed on-
ly if at startup a gear other than neutral
(N) is engaged.
If the message on the recon-
figurable multifunction dis-
play continues to stay on,
contact Fiat Dealership.
If the message on the recon-
figurable multifunction dis-
play continues to stay on,
contact Fiat Dealership.
To safeguard clutch efficien-
cy do not use the accelerator
to keep the car still (e.g.:
when the car is parked facing
uphill) since clutch overheating could
damage it. Use the brake pedal and
press the accelerator pedal only when
deciding to move off.
If messages on the reconfig-
urable multifunction display
continue to stay on, contact
Fiat Dealership.
603_83_378 Punto Dual GB 19-06-2007 14:32 Pagina 11