2007 FIAT DOBLO brake

156VEHICLE MAINTENANCE
1.Engine oil - 2.Battery - 3.Brake flu-
id - 4.Windscreen washer fluid - 5.
Engine coolant - 6.Power steering flu-
id.
F0A0345b
fig. 3 - 1.3 Multijet versions
Do not smoke while
working in the engine
compartment: the pres-
ence of flammable gas and
vapour could cause a fire.
Be careful not to mix up
the various types of fluids
when you are topping up:
they are all mutually incompati-
ble and could damage the vehicle.

160VEHICLE MAINTENANCE
Prevent brake fluid,
which is highly corrosive,
from coming into contact
with painted parts. Should it hap-
pen, immediately wash with wa-
ter.
Check that fluid contained in tank is
at maximum level. If fluid has to be
added, it is suggested to use the brake
fluid in table "Fluids and lubricants"
(see chapter "Technical characteris-
tics"). At plug opening, pay maximum
attention in order to prevent any im-
purities from entering the tank.
For topping up, always use a funnel
with integrated filter with mesh equal
to or lower than 0.12 mm.
fig. 14
F0A0126b
POWER STEERING FLUID
fig. 13
The oil level with the vehicle on lev-
el ground and engine cold should be
included between the references MIN
and MAXon the reservoir.
When the oil is hot, the level can ex-
ceed the reference line MAX.
When topping up (where necessary)
make sure that the oil has the same
specifications as the oil in the system.Do not travel with the
windscreen washer reser-
voir empty. The wind-
screen washer is fundamental for
improving visibility.
fig. 13
F0A0261b
Do not let the power
steering fluid come into
contact with hot engine
parts. It catches fire very easily.
Oil consumption is ex-
tremely low. If the oil lev-
el needs topping up again
a s short period of time, have the
system checked for leakage at a
Fiat Dealership.
BRAKE/HYDRAULIC
CLUTCH FLUID fig. 14-15
Check that the level of the fluid in the
reservoir is at the maximum.
Use DOT 4 fluid only for topping up.
We recommend TUTELA TOP 4
that the braking system was originally
filled with.

161VEHICLE MAINTENANCE
IMPORTANTBrake fluid is hy-
groscopic (meaning it absorbs humid-
ity). This is why the fluid should be
changed more frequently than shown
in the service schedule if the vehicle is
mainly driven in areas with a high per-
centage of humidity in the air.
fig. 15
F0A0127b
Brake fluid is poisonous
and very corrosive. In the
event of accidental con-
tact, wash the effected part with
water and mild soap and rinse. If
the fluid is swallowed, call a doc-
tor immediately.The symbol πon the
container indicates syn-
thetic brake fluid distin-
guishing it from mineral fluid. Us-
ing mineral type fluid would dam-
age the special rubber braking
system gaskets beyond repair.POLLEN FILTER
The pollen filter is located under the
dashboard near the central dashboard
unit on passenger side.
If the vehicle is often used in dusty or
extremely polluted environments, you
should change the filter element more
frequently than shown in the service
schedule. It should be changed espe-
cially if the amount of air introduced
into the passenger compartment is in-
troduced.

182TECHNICAL SPECIFICATIONS
TRANSMISSION
CLUTCH
Hydraulic, self-adjusting external
control.
GEARBOX
Five forward gears and reverse with
synchromesh for front gear engage-
ment.
Cyclical gear reduction and differen-
tial assembly incorporated in the gear-
box.
Drive transmission to the front
wheels by means of drive shafts con-
nected to the differential assembly and
the wheels with CV joints.
BRAKES
SERVICE AND
EMERGENCY BRAKES
Front:
– disc, floating shoe, self-ventilated.
Rear:
– drum, self-centring callipers.
Crossed hydraulic circuit control.
Vacuum brake booster.
ABS system with four sensors and
EBD.
Automatic take-up of friction liner
wear.
Lacking the ABS, there is the brake
force distributor that acts on rear
brake circuit according to load on rear
axle
HANDBRAKE
Controlled by a lever, it works me-
chanically on the rear brake shoes.
SUSPENSIONS
FRONT
Independent wheel, McPherson sus-
pension with steel wishbones an-
chored to an auxiliary crossmember.
Coil springs and sway bar.
Double acting telescopic hydraulic
shock absorbers.
REAR
Stiff axle with wishbones.
Double acting telescopic hydraulic
shock absorbers.
Sway bar in Fiat Doblò Passengers
Transport versions.

188TECHNICAL SPECIFICATIONS
WEIGHTS
Weights (kg) - Fiat Doblò Cargo versions - Short wheelbase
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
▼For specific markets, where applicable.
1.4 8V
1190
730
1010
1150
1920
1000
500
100
601.3
75HPMultijet
1270
730
1010
1150
2000
1200
500
100
601.9 100▼/105HPMultijet
1280
730
1010
1150
2010
1300
500
100
601.3 85HPMultijet
1290
730
1010
1150
2020
1300
500
100
601.9 120HPMultijet
1300
730
1010
1150
2030
1300
500
100
60
Weight empty
(including fluids, 90% fuel in the
tank and no optional)
Payload including driver (*):
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling
(trailer with brakes)

Weights (kg) - Fiat Doblò Cargo versions - Short wheelbase - Extra capacity
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
▼For specific markets, where applicable
1.4 8V
1190
850
1010
1270
2040
1000
500
100
601.3
75HPMultijet
1270
850
1010
1270
2120
1200
500
100
601.9 100▼/105HPMultijet
1280
850
1010
1270
2130
1300
500
100
60
189TECHNICAL SPECIFICATIONS
Weight empty (including fluids, 90% fuel in the tank and no optional)
Payload including driver (*):
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling (trailer with brakes)

190TECHNICAL SPECIFICATIONS
Weights (kg) - Fiat Doblò Cargo versions - Short wheelbase - High roof
1.4 8V
1210
730
1010
1150
1940
1000
500
–
601.3
75HPMultijet
1290
730
1010
1150
2020
1200
500
–
601.9 100▼/105HPMultijet
1300
730
1010
1150
2030
1300
500
–
60
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
* For specific markets, where applicable
1.3 85HPMultijet
1310
710
1010
1150
2020
1300
500
–
601.9 120HPMultijet
1320
710
1010
1150
2030
1300
500
–
60
Weight empty
(including fluids, 90% fuel in the
tank and no optional)
Payload including driver (*):
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling
(trailer with brakes)

Weights (kg) - Fiat Doblò Cargo versions - Short wheelbase - High roof - Extra capacity
(*) If special equipment is fitted (wing window, tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
▼For specific markets, where applicable
1.4 8V
1210
850
1010
1270
2060
1000
500
–
601.3
75HPMultijet
1290
850
1010
1270
2140
1200
500
–
601.9 100▼/105HPMultijet
1300
850
1010
1270
2150
1300
500
–
60
191TECHNICAL SPECIFICATIONS
Weight empty (including fluids, 90% fuel in the tank and no optional)
Payload including driver (*):
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on roof
Maximum load on ball coupling (trailer with brakes)