Page 100 of 216
102
III
G R O U N D C L E A R A N C E A D J U S T M E N T
Position changes may only be made when the engine is running.
The ground clearance is adjusted automatically. You can however modify the vehicle height in certain s p e c i fi c c a s e s .
To change the position
Press once on one of the adjust-ment controls. The change of posi-tion is indicated at the start of the adjustment by:A message orA
Temporary display of the initial position with the symbol for the position requested.Note: You are recommended to avoid any changing of position while you have your foot on the brake.
Viewing of the position of the vehicle
On completion of the adjustmentyou see either a message or an illustration of the position attained by the vehicle, with the appropriate symbol.
Page 101 of 216
103
III
G R O U N D C L E A R A N C E A D J U S T M E N T
AUTOMATIC CORRECTION OF GROUND CLEARANCE
Your vehicle has active suspension with variable damping which is electronically controlled. This automatically regu-lates the ground clearance according to the vehicle speed and the road surface conditions.
Limits on access to the posi-tions
Maximum height:
Impossible if speed > 10 km / h ( 6 m p h ) .
Intermediate position:
Impossible if speed > 40 km / h ( 2 4 m p h ) .
Normal road position: Always permitted.
Minimum height:
Impossible if speed > 10 km / h ( 6 m p h ) .Note: If the speed authorised for a particular position is exceeded, the vehicle reverts automatically to the normal road position.
Signalling of a requested position not authorised
On the display:
The display indicates for a short time, via a message or by hatching on the requested position, that the adjustment is impossible.
The vehicle remains in the position that is authorised and the display c o n fi r m s t h i s p o s i t i o n .
Automatic variation of ground clearanceIf the speed Ifexceeds110 km / h(68 mph ) , o n a g o o d r o a d , t h e ground clearance is lowered.
The vehicle reverts to the normal road position if the road dete-riorates or if the speed comes b e l o w 9 0 k m / h ( 5 6 m p h ) .When the vehicle is stationary the ground clearance is low-ered to the parking position.
Page 154 of 216
157
VI
4
Before positioning the jack, always adjust the vehicle's ground clearance to the “maximum height” position and retain this adjustment for as long as the jack is under the veh icle (do not use the hydraulic adjustments).
Never get underneath the vehicle if it is supported only by the jack.
T h e j a c k a n d a l l t h e t o o l s a r e d e s i g n e d s p e c i fi c a l l y f o r u s e on your particular vehicle. Do not use them for any other applications.
Have the original wheel repaired and refitted as so on as possible.
It is essential not to exceed a speed of 80 km/h (50 mph) on your spare wheel.
REMOVAL1. P a r k t h e v e h i c l e o n s t a b l e , fi r m g r o u n d t h a t i s n o t s l i p p e r y . A p p l y t h e parking brake.2. With the engine idling, adjust the ground clearance to maximum height. See “Comfort” and “Adjusting the ground clearance”. Switch off the igni- t i o n a n d e n g a g e fi r s t g e a r o r r e v e r s e g e a r d e p e n d i n g o n a n y s l o p e ( f o r a v e h i c l e w i t h a u t o m a t i c g e a r b o x , s e l e c t p o s i t i o n P ) .3. Position the chock at the wheel that is diametrically opposite the one to be replaced.4. Position the jack at one of the four jacking-points provided on the sub-frame close to the wheels, then use the handle to unwind the jack until it reaches the ground.5. Slide the removal tool 4 into the notch and lever vigorously to detach the anti-theft bolt protector. See illustration. You can use the handle at the extremity of the tool 4.6. Slacken the wheel bolts.7. Continue to extend the jack until the wheel is a few cen timetres off the ground.8. Undo the bolts, remove the wheel.
C H A N G I N G A W H E E L
Page 181 of 216
212121
II
A
B
A
B
C
TH E F U N C T I O N S O F T H E TR A F F I C INFORMATION MENU IN DETAIL
T h e fi l t e r s e n a b l e y o u t o s e l e c t t h e t y p e s o f information which you wish to receive.This menu gives you access:To the g e o g r a p h i c a l fi l t e r: information concerning incidents situated around your vehicle, around a given location and/or on an itinerary (radius of 3 to 200 km),To road information: information con- c e r n i n g r o a d i n c i d e n t s s u c h a s t r a f fi c , road closures, height /width limitations, state of the roadway or weather condi-t i o n s (d e p e n d i n g o n t h e i n f o r m a t i o n available).To u r b a n t r a f fi c i n f o r m a t i o n: information concerning the town where you are, such as parking, public transport and demon-strations (depending on the information available). T h e fi l t e r s c a n b e c u m u l a t i v e . I f n o fi l t e r i s s e l e c t e d , a l l t h e T M C i n f o r m a t i o n will be displayed.
