Page 8 of 216
II
1111
A
B
C
EFD
G21
IN BRIEF
FRONT SEATS
C. Adjustment of the backrest angle.
D. Adjustment of the backrest lum-bar support.
E. Seat height and slide adjust-ments.
F. Adjustment of the seat cushion angle.
G. Memorisation of dashboard adjustments:
- Driver's seat.
- Steering wheel.
- Exterior rear view mirrors.
- Head-up display.
You have the possibility to mem-orise two driving positionsusing buttons 1 and 2.
ELECTRICAL ADJUSTMENTS
While the vehicle is stationary, unlock the steering wheel by push-ing the lever forward.
Adjust the height and the reach of the steering wheel, then lock the position by pulling the lever upwards.
MANUAL STEERING COL-UMN ADJUSTMENT
A. Adjustment of the backrest angle.
B. Controls for the heated seats.
282927
G E T T I N G S T A R T E D
Page 27 of 216
30
II
21
M
M E M O R I S A T I O N
DRIVING POSITIONS MEMO-RISED VIA BUTTONS 1 AND 2
To memorise a driving position:a. Place the igntion key in “Drive” p o s i t i o n ( s e c o n d p o s i t i o n ) .b. Make your adjustments of the seat, the steering wheel, the rear view mirrors and the Head-up Display.c. Press successively on button M then on button 1 ( fi r s t d r i v i n g p o s i t i o n ) o r 2 (second driving p o s i t i o n ) .
T h e m e m o r i s a t i o n i s c o n fi r m e d b y a sound signal.Note: The memorisation of a new driving position cancels and replaces the previous one.
The memorisation function allows to make the following dashboard adjustments:Driver's seat
Steering wheel
Exterior rear view mirrorsExteriorHead-up display.
See “Steering wheel adjustment”, “Rear view mirrors” and “Head-up Display”.
You have the possibility to memo-rise two driving positions using buttons 1 and 2.
Page 47 of 216
54
II
B
AC
D
NIGHT DRIVINGA fi r s t p r e s sA on the DARK button puts the display on standby. Only the time and the temperature remain displayed.
A second pressA switches off the display and the instrument panel, except for information concerning:
The speed indicator.The automatic gearbox.Cruise control / Speed limiter if this has been activated.Note:
Temporary l i g h t i n g o f t h e d i s p l a y f o r m o d i fi c a t i o n o f a u d i o - C D a d j u s t -emporaryments and air conditioning.The display lights up if any of the other buttons on the display is pressed. To revert to night driving, press just once on button DARK.DARKDARKAll the displays come on if there is an alert.AllA third pressA returns you to normal lighting.
Page 52 of 216
55
II2
1
43
H E A D - U P D I S P L A Y
The Head-up display projects essential driving data into the d r i v e r ' s fi e l d o f v i s i o n . T h i s e n a b l e s the driver never to take his eyes off the road.
ACTIVATION/DEACTIVATION
To activate/deactivate the Head-up display: when you switch on the ignition, press on button 1.
The function status (activated/deac- t i v a t e d ) w h e n y o u s t o p t h e e n g i n e is retained when you restart.
ADJUSTMENTS OF THE HEAD-UP DISPLAY
Height adjustment
To adjust the height for the Head-up display, press on buttons 2 and 3.
It is recommended to adjust it as low as possible.
Brightness adjustment
The Head-up display has a bright-ness sensor so that the information can be seen to the best advantage, whatever the ambient brightness.
You can enhance the display brightness at any time by rotating the control 1.
Note:In certain extreme weather con-ditions (rain and/or snow, strong sunlight), the Head-up display may be momentarily subject to interference.
When emerging from a tunnel, there is a certain delay before the system can re-adapt the display brightness to the out-side conditions.
Remark: Certain types of specta-cles may disperse the light coming from the Head-up display.
There is memorisation of driving positions as well as those for the Head-up dis-play
The adjustments you have made for the Head-up display are adopted alongside the driving posi-tion memorisations (see “Memori- s a t i o n ” ) : t h e y a r e :Height adjustment.
Brightness.The types of information selected.
Page 85 of 216
87
III
1
2a2b1
3a3b4
765
A U T O M A T I C A I R C O N D I T I O N I N G
The system has a differentiated adjustment for the driver's side and passenger's side, in terms of temperature and a i r d i s t r i b u t i o n . T h e a i r fl o w i s c o m m o n t o b o t h s i d e s .
Symbols and messages relating to the automatic air conditioning controls will display on the multifunction screen.
2. TEMPERATURE ADJUSTMENT
To adjust the temperature, press button 2a for the driv-er's side and button 2b for the passenger's side.
An adjustment around 21 will give you the optimum comfort level. However, depending on your preferences anywhere between 18 and 24 is quite usual.
Operating the air conditioning system on “AUTO” guar-antees good ventilation inside the cabin.Note: There may be a discrepancy between the actual c a b i n t e m p e r a t u r e a n d t h e fi g u r e d i s p l a y e d .
This is the normal operating mode for the system. Depending on the temperature chosen, a press on this b u t t o n , c o n fi r m e d b y t h e l i g h t i n g o f t h e w a r n i n g l a m p , will automatically and simultaneously bring all the fol-lowing functions into play:Air fl o w .Air
Cabin temperature.
Air distribution.Air
Air inlet.Air
It is recommended to keep all the air vents open. Just by pressing any of the buttons, except for temperature 2a and 2b, you can change to manual mode. the warn-ing lamp goes out.
Page 87 of 216
89
III
3a3b
4
A U T O M A T I C A I R C O N D I T I O N I N G
3. ADJUSTING THE AIR DISTRIBUTION
Successives or continuous presses on buttons 3a and 3b o r i e n t t h e fl o w o f a i r o n t h e d r i v e r ' s s i d e o r o n t h e passenger's side.
T h e s y m b o l ( a r r o w s ) c o r r e s p o n d i n g t o t h e o r i e n t a t i o n chosen is displayed on the multifunction screen:Windscreen and side windows.
Central, lateral and soft diffusion air conditioning v e n t s ( i f o p e n ) .
Passenger footwells.Passenger“AUTO” automatic distribution.
Page 90 of 216
92
III
A
B
C
D
AUTOMATIC OPERATION
Activation
When you press button A, the automatic mode automatically and simultaneously controls the air fl o w and air distribution for the rear air conditioning.
The warning lamp on button Alights up.
It is recommended to keep both air vents open.
Deactivation
A press on any of the buttons B, C or D, deactivates the automatic operation of the rear air condition-ing.
the warning lamp on button A goes out.
Remark: If the air conditioning in the front of the cabin is stopped (function deactivated in the “Air conditioning” menu or via the con-trol 4 f o r a d j u s t i n g t h e a i r fl o w ) , then the rear automatic air condi-tioning is not available.
ADJUSTING THE AIR FLOW
If you press buttons B or D you increase or decrease t h e fl o w f o r the rear air conditioning.
T h e n u m b e r o f d i o d e ( s ) l i t u p , c o m p o s i n g t h e s y m b o l f o r a i r fl o w (helix, situated between buttons Band D ) e x p r e s s e s i t s p o w e r l e v e l .
T o d e a c t i v a t e t h e a i r fl o w a n d a i r distribution for the rear air condi-tioning, press successively on but-ton D so that all the diodes go out.
DISTRIBUTION TO FOOT-WELLS/HEADS
Successive presses on button Cwill modify the distribution of the a i r fl o w .
Three directions are available:Passengers' heads.
Passenger footwells.PassengerPassengers' heads and foot-wells.
The arrow lit up indicates the dis-tribution of air chosen manually. In “AUTO” mode, no arrow lights up.
ADJUSTMENT OF THE FLOW OF AIR INTO THE STORAGE UNDER THE FRONT CEN-TRAL ARMREST
I f y o u c h o o s e a m a x i m u m fl o w of air in the rear by pressing Band distribution towards passen-ger's heads by pressing C, having closed the rear air vents, you will o b t a i n a m a x i m u m fl o w o f a i r i n t o the storage beneath the armrest.
Page 102 of 216
104
III221
2
2
I N T E R I O R L I G H T I N G
Front
INTERIOR LAMPS
1. Interior lamps
A press on button 1 of the front interior lamp, switches the interior lamps on or off.
Switching on and off is progressive after an action on the remote con-trol, but immediate after a press on button 1.
R e a r
2. Spotlamps
A press on one of the buttons 2switches the corresponding spot-lamp on or off.
These only work when the ignition is switched on.
Automatic lighting of the interior lampsThey come on when you remove the ignition key, unlock the vehicle or open a door.
They go out progressively when the doors are closed, the vehicle locked or the ignition switched on.
Deactivation/Activation of automatic lighting
A long press on button 1, deacti-vates the operaton of the inerior lamps. To reactivate them, press on the same button.
Changing bulbsTo change a front interior lamp bulb: Detach the transparent screen. Use a bulb W 5 W.To change a rear interior lamp bulb: Detach the two surrounds of the transparent screen and pull it away. Use a bulb W 5 W.
