117
IV
ON / OFF
With the key in Drive position M, press on control A to switch the radio on or off.Note:If the radio was on the last time Ifyou switched off the ignition, it will resume automatically when you switch on the ignition again. You will not have to press on control A.
After switching off the ignition, Afteryou can still operate the audio system even without the igni- t i o n k e y b e i n g p r e s e n t . S i m p l y press on button A. The system will turn itself off after approx.30minutes.
ANTI-THEFT SYSTEM
This radio is coded in such a way as to function only on your particu-lar vehicle. It would be unusable if installed on any other vehicle.Note: The anti-theft system is automatic and requires no action on your part.
118
IV
NOTES ON RADIO RECEPTION
Your radio will be subject to certain phenomena that are not encoun-tered by domestic systems.
The reception of AM and FM sig-nals may suffer from interference, which is caused by the nature and propagation of the signals and d o e s n o t r e fl e c t o n t h e q u a l i t y o f your radio installation.
In AM, the reception may be affected when passing under power lines or bridges, or when travelling through tunnels.
In FM mode, the reception may be affected by the distance from t h e s t a t i o n t r a n s m i t t e r , t h e r e fl e c t -ing of signals off obstacles (moun- t a i n s , h i l l s , t o w e r b l o c k s ) a n d r a d i o blackspots (no coverage from the s t a t i o n t r a n s m i t t e r ) .
SELECTION OF RADIO SOURCE
Press button D to select the source.
You can also do this by means of control 5 at the steering wheel.
R A D I O S O U R C E
SELECTION OF FREQUEN-CIES AND MEMORY BANKS
Press button R successively to go through the memory banks FM1, FM2 and FM3, for the FM waveband, and the mem-ory banks MW/LW, for the AM waveband.
MANUAL SEARCH
Manual search is via buttons J or M.
By keeping button J or M pressed, you will be able to scroll through the waveband. Scrolling will stop as soon as you release the button. The radio will remain tuned to the frequency that is displayed.
TUNING SENSITIVITY
Automatic searches can be carried out according to two levels of sen-sitivity:To capture the most powerful transmitters, choose the local search mode “LO” (default o p t i o n ) .
To capture the weakest or most distant transmitters, choose the sensitive search mode “DX”.