2007 CHRYSLER TOWN AND COUNTRY jacking

[x] Cancel search: jacking

Page 379 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Flasher..................380
If Your Engine Overheats.................381
Jacking And Tire Changing................382
▫Jacking Instructions —

Page 382 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call a service center if your
vehicle overheats. If you decide to lo

Page 383 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual Jacking Instructions — Stow ’n Go Seating
Preparations For Jacking
WARNING!
Carefully follow these tire changing warnings to help prevent personal
injury or damage to your vehicle:
•Do not attem

Page 386 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual Jacking Instructions — Stow ’n Go Seating
1. Loosen (but do not remove) the wheel lug nuts by
turning them to the left one turn while the wheel is still
on the ground.
2. To remove the compact spa

Page 390 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual 6. These locations are on the sill flange of the body and
consist of a pair of downstanding tabs. The jack is to be
located, engaging the flange, between the pair of tabs
closest to the wheel to be ch

Page 394 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual WARNING!
Verify that ’both’ retainer tabs of the wheel spacer
have been properly extended through the center of
the wheel and spare tire cover assembly. Failure to
properly engage both retainer ta

Page 395 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel

Page 397 of 504

CHRYSLER TOWN AND COUNTRY 2007 4.G Owners Manual Jacking Instructions — Non Stow ’n Go Seating
1. Loosen (but do not remove) the wheel lug nuts by
turning them to the left one turn while the wheel is still
on the ground.
2. Fit the jack handle o
Page:   1-8 9-16 next >