Page 368 of 422

93,000 Miles (155 000 km)
❑Change engine oil and filter and replace engine
oil pan drain plug washer (or every 3 months,
whichever occurs first).An Emission Control
Service.
96,000 Miles (160 000 km)
❑Change engine oil and filter and replace engine
oil pan drain plug washer (or every 3 months,
whichever occurs first).An Emission Control
Service.
❑Rotate tires. SeeTire Inspection and Rotation
on page 316for proper rotation pattern and
additional information.(See footnote +.)
99,000 Miles (165 000 km)
❑Change engine oil and filter and replace engine
oil pan drain plug washer (or every 3 months,
whichever occurs first).An Emission Control
Service.
150,000 Miles (240 000 km)
❑Drain, flush, and refill cooling system. This
service can be complex; you should have
your dealer perform this service. SeeEngine
Coolant on page 268for what to use. Inspect
hoses. Clean radiator, condenser, pressure cap,
and neck. Pressure test the cooling system
and pressure cap.An Emission Control Service.
368
Page 373 of 422

❑Rotate tires. SeeTire Inspection and Rotation
on page 316for proper rotation pattern and
additional information.(See footnote +.)
❑Replace spark plugs.An Emission Control
Service.
❑Replace fuel filter.An Emission Control
Service. (See footnote †.)
❑Inspect drive belt(s).
❑Inspect timing belt.
❑Inspect EVAP canister, vapor lines and EVAP
vent solenoid valve.An Emission Control
Service. (See footnote †.)
❑Inspect PCV system.An Emission Control
Service. (See footnote †.)
❑Change brake/clutch fluid (or every 24 months,
whichever occurs first).97,500 Miles (162 500 km)
❑Change engine oil and filter and replace engine
oil pan drain plug washer (or every 12 months,
whichever occurs first).An Emission Control
Service.
❑Rotate tires. SeeTire Inspection and Rotation
on page 316for proper rotation pattern and
additional information.(See footnote +.)
150,000 Miles (240 000 km)
❑Drain, flush, and refill cooling system. This
service can be complex; you should have
your dealer perform this service. SeeEngine
Coolant on page 268for what to use. Inspect
hoses. Clean radiator, condenser, pressure cap,
and neck. Pressure test the cooling system
and pressure cap.An Emission Control Service.
373
Page 381 of 422

Engine Cooling System Inspection
Inspect the hoses and have them replaced if
they are cracked, swollen or deteriorated. Inspect
all pipes, fittings and clamps; replace as needed.
Clean the outside of the radiator and air
conditioning condenser. To help ensure proper
operation, a pressure test of the cooling system
and pressure cap is recommended at least once
a year.
Throttle System Inspection
Inspect the throttle system for interference or
binding, and for damaged or missing parts.
Replace parts as needed. Replace any
components that have high effort or excessive
wear. Do not lubricate accelerator and cruise
control cables.
Brake System Inspection
Inspect the complete system. Inspect brake lines
and hoses for proper hook-up, binding, leaks,
cracks, chafing, etc. Inspect disc brake pads for
wear and rotors for surface condition. Inspect other
brake parts, including calipers, parking brake,
etc. You may need to have your brakes inspected
more often if your driving habits or conditions
result in frequent braking.
381