2007 CHEVROLET MONTE CARLO park assist

Universal Home Remote System
Operation (With three round LED)
Your vehicle may have the Universal Home Remote
System. If there are three round Light Emitting
Diode (LED) above the Universal Home Remote
System buttons, follow the instructions below.
If there is one triangular LED above the Universal
Home Remote System buttons, follow the
instructions under Universal Home Remote System
Operation (with one triangular LED).
This system provides a way to replace up to
three remote control transmitters used to activate
devices such as garage door openers, security
systems, and home lighting.Do not use the this system with any garage door
opener that does not have the stop and reverse
feature. This includes any garage door opener
model manufactured before April 1, 1982.
Read the instructions completely before attempting
to program the transmitter. Because of the steps
involved, it may be helpful to have another
person available to assist you in programming
the transmitter.
Be sure to keep the original remote control
transmitter for use in other vehicles, as well as,
for future programming. You only need the
original remote control transmitter for xed code
programming. It is also recommended that
upon the sale or lease termination of the vehicle,
the programmed buttons should be erased for
security purposes. See “Erasing your Universal
Home Remote Buttons” later in this section.
Be sure that people and objects are clear of
the garage door or security device you are
programming. When programming a garage door,
it is advised to park outside of the garage.
131

Read the instructions completely before attempting
to program the Universal Home Remote.
Because of the steps involved, it may be helpful to
have another person available to assist you in
the programming steps.
Keep the original hand-held transmitter for use
in other vehicles as well as for future Universal
Home Remote programming. It is also
recommended that upon the sale of the vehicle,
the programmed Universal Home Remote buttons
should be erased for security purposes. See
“Erasing Universal Home Remote Buttons” later
in this section or, for assistance, seeCustomer
Assistance Offices on page 426.
Be sure that people and objects are clear of
the garage door or gate operator you are
programming. When programming a garage door,
it is advised to park outside of the garage.
It is recommended that a new battery be installed
in your hand-held transmitter for quicker and
more accurate transmission of the radio-frequency
signal.Programming Universal Home Remote
Follow these steps to program up to three channels:
1. Press and hold down the two outside
Universal Home Remote buttons, releasing
only when the Universal Home Remote
indicator light begins to ash, after
20 seconds. Do not hold down the buttons for
longer than 30 seconds and do not repeat
this step to program a second and/or
third hand-held transmitter to the remaining
two Universal Home Remote buttons.
2. Position the end of your hand-held transmitter
about 1 to 3 inches (3 to 8 cm) away from
the Universal Home Remote buttons
while keeping the indicator light in view.
3. Simultaneously press and hold both the
desired Universal Home Remote button
and the hand-held transmitter button. Do not
release the buttons until Step 4 has been
completed.
Some entry gates and garage door openers
may require you to substitute Step 3 with
the procedure noted in “Gate Operator and
Canadian Programming” later in this section.
137

Right Front Passenger Position,
Safety Belts............................................... 33
Roadside
Assistance Program................................. 428
Rocking Your Vehicle to Get it Out.............. 276
Routing, Engine Drive Belt.......................... 417
Running the Engine While Parked............... 122
S
Safety Belt
Passenger Reminder Light....................... 173
Pretensioners............................................. 40
Reminder Light........................................ 173
Safety Belts
Care of.................................................... 388
Driver Position........................................... 24
How to Wear Safety Belts Properly............ 24
Questions and Answers About Safety
Belts....................................................... 23
Rear Safety Belt Comfort Guides............... 36
Rear Seat Passengers............................... 33
Right Front Passenger Position.................. 33
Safety Belt Extender.................................. 40
Safety Belt Use During Pregnancy............. 32
Safety Belts Are for Everyone.................... 18
Safety Warnings and Symbols......................... 4Scheduled Maintenance............................... 406
Seatback Latches.......................................... 14
Seats
Easy Entry Seat........................................ 15
Head Restraints......................................... 13
Heated Seats............................................. 10
Manual Lumbar............................................ 9
Manual Passenger....................................... 8
Power Seat................................................. 8
Reclining Seatbacks................................... 10
Seatback Latches...................................... 14
Split Folding Rear Seat.............................. 16
Securing a Child Restraint
Rear Seat Position..................................... 60
Right Front Seat Position........................... 63
Security Light.............................................. 184
Service........................................................ 296
Accessories and Modications.................. 296
Adding Equipment to the Outside of
Your Vehicle......................................... 298
California Proposition 65 Warning............. 297
Doing Your Own Work............................. 297
Engine Soon Light................................... 181
Publications Ordering Information............. 441
Servicing Your Airbag-Equipped Vehicle......... 82
Setting the Time.................................211, 212
Sheet Metal Damage................................... 391
453