2007 CHEVROLET MONTE CARLO keyless entry

[x] Cancel search: keyless entry

Page 87 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual Keys.............................................................. 89
Remote Keyless Entry (RKE) System.......... 90
Remote Keyless Entry (RKE)
System Operation.................................... 91

Page 90 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual One key is used for
the ignition and the
driver’s door.
If you need a new key, contact your dealer for
assistance. In an emergency, contact Roadside
Assistance. SeeRoadside Assistance Program
on pag

Page 91 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual At times you may notice a decrease in range. This
is normal for any remote keyless entry system.
If the transmitter does not work or if you have to
stand closer to your vehicle for the transmitter
to

Page 92 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual The following functions may be available if your
vehicle has the remote keyless entry system:
/(Remote Vehicle Start):If your vehicle has
this feature, it may be started from outside
the vehicle using

Page 93 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual V(Remote Trunk Release):Press and hold
this button for about one second to release the
trunk lid. The transaxle must be in PARK (P) for
this feature to operate.
L(Vehicle Locator/Panic Alarm):Press an

Page 94 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual Battery Replacement
Under normal use, the battery in your remote
keyless entry transmitter should last about
four years.
You can tell the battery is weak if the transmitter
will not work at the normal

Page 95 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual 3. Slide the new battery into the transmitter with
the positive side of the battery facing down.
Use a type CR2032 battery, or equivalent
type. Make sure the cover is on tightly,
so water will not get

Page 96 of 456

CHEVROLET MONTE CARLO 2007 6.G Owners Manual To start the vehicle using the remote start feature,
do the following:
1. Aim the transmitter at the vehicle.
2. Press and release the transmitter’s lock
button, then immediately press and hold
the
Page:   1-8 9-16 17-24 next >