Once you have removed the wheel cover, use the
following procedure to remove the at tire and
install the spare tire.
1. It is recommended
that you do a
safety check before
preceding. See
Changing a Flat
Tire on page 372for
more information.
Turn the wheel wrench once on each wheel
nut to loosen them. Do not remove them yet.2. For all wheel types, nd the jacking
location using the diagram above and the
corresponding hoisting notches located on
the bottom side of the plastic molding.
The notches in the plastic molding are marked
with a triangle shape to help you nd them.
The front location is about 7.0 inches (17.7 cm)
from the rear edge of the front wheel well.
The rear location is about 4.5 inches (11.4 cm)
from the rear edge of the wheel well.
3. Put the compact spare tire near you.
376
