2007 CHEVROLET MALIBU start stop button

MSG (Traffic):If TRAFFIC displays, the tuned
station broadcasts traffic announcements and
when a traffic announcement comes on the
tuned radio station you will hear it.
If the current tuned station does not broadcast
traffic announcements, press and hold this
button for two seconds and the radio seeks to a
station that does. When a station that broadcasts
traffic announcements is found, the radio stops
seeking and TRAF between brackets displays.
When a traffic announcement comes on the
tuned radio station you will hear it. If no station
is found that broadcasts traffic announcements,
NO TRAFFIC INFO displays.
If TRAF displays, press and hold the MSG
button for two seconds to turn off the traffic
announcements.
The radio plays the traffic announcement even
if the volume is low. The radio interrupts the
play of a CD if the last tuned station broadcasts
traffic announcements.
This function does not apply to XM™ Satellite
Radio Service.Radio Messages
CALIBRATE:The audio system has been
calibrated for your vehicle from the factory.
If CALIBRATE displays, it means that the radio
has not been congured properly for the vehicle
and it must be returned to your dealer/retailer
for service.
LOCKED:This message displays when the
THEFTLOCK
®system has locked up. Take
your vehicle to your dealer/retailer for service.
If any error occurs repeatedly or if an error cannot
be corrected, contact your dealer/retailer.
Radio Messages for XM™ Only
SeeXM Radio Messages on page 259later in
this section for further detail.
Playing a CD
If the ignition or radio is turned off, with a CD
in the player, it stays in the player. When
the ignition or radio is turned on, the CD starts
playing where it stopped, if it was the last
selected audio source.
252

s(Rewind):Press thesbutton to rewind the
DVD or CD. To stop rewinding, press the
sbutton
again. This button might not work when the DVD is
playing the copyright information or the previews.
\(Fast Forward):Press the\button to fast
forward the DVD or CD. To stop fast forwarding,
press the
\button again. This button might
not work when the DVD is playing the copyright
information or the previews.
s(Play/Pause):Press thes(play) button to
start play of a DVD or CD. Press the
s(pause)
button while a DVD or CD is playing to pause it.
Press this button again to continue the play of
the DVD or CD.
While in the menu, press the
sbutton to enter a
selection. When using RSA or an auxiliary device,
pressing the
sbutton plays a DVD or a CD if they
are loaded.
g(Previous Chapter/Track):Press this button to
go to the beginning of the current track or chapter.
Press the
gbutton again to return to the previous
track or chapter. This button might not work when
the DVD is playing the copyright information or the
previews.
l(Next Chapter/Track):Press thegbutton to
advance to the beginning of the next chapter or
track. This button might not work when the DVD is
playing the copyright information or the previews.
c(Stop):Press thecbutton to stop playing,
rewinding, or fast forwarding a DVD or CD.
Press the
cbutton twice to return to the
beginning of the DVD.
b(Size):Press thebbutton to change
the display mode for 4:3 aspect ratio movies.
This function cycles between NORMAL, WIDE,
and FULL video modes.
NormalThe horizontal image is not stretched.
The borders at the left and the right of the
picture are blanked. All lines of the vertical
image are displayed.
WideThe horizontal image is non-lineraly
stretched. The image tends to be stretched
more at the borders then the middle.
The borders are not displayed.
FullThe horizontal image is linearly stretched.
All vertical lines are displayed. No borders
are present.
269

Problem Recommended Action
How do I get subtitles
on or off?Press the display button
on the remote control to
go to the DVDs main
menu. Then follow the
screen prompts.
After stopping the player,
I push the play button
but sometimes the DVD
starts where I left off,
and sometimes at the
beginning.Press the stop button on
the remote control to
resume where the DVD
left off. Press the stop
button twice to start the
DVD at the beginning.
If the power is off and the
DVD is still in the player,
press the play button.
The DVD is playing but
there is no picture or
sound. The auxiliary
source is running but
there is no picture
or sound.Press and release the
AUX button on the
remote control or the
SRCE and play buttons
on the DVD player to
get to auxiliary input.
Check to make sure
that the auxiliary source
is connected to the
inputs properly.
The audio or video
skips or jumps.The DVD could be
dirty or scratched.
Try cleaning the DVD.Problem Recommended Action
When I return to the
DVD from the system
menu, sometimes it plays
from the beginning and
sometimes from where
it left off.If the stop button was
pressed once, it resumes
play from where it left off.
If the stop button was
pressed twice, it starts at
the beginning of the DVD.
However, if a change
was made to the menu
the DVD starts from
where it left off, even if
the stop button was only
pressed once.
The fast forward, reverse,
previous, and next
functions do not work.Some commands that
do one thing for DVDs
does not always work or
perform the same function
for audio CDs or games.
These functions can
also be disabled when
the DVD is playing the
copyright information
or the previews.
275