2007 CHEVROLET MALIBU wheel size

[x] Cancel search: wheel size

Page 342 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual Tires............................................................ 397
Winter Tires.............................................. 398
Tire Sidewall Labeling............................... 399
Tire Term

Page 398 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual Low-Pro�le Performance Tire
If your vehicle has P225/50R18 or P225/50R17
size tires, they are classi�ed as low-pro�le
performance tires. These tires are designed
for very responsive driving on wet or

Page 399 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual If you choose to use winter tires:
Use tires of the same brand and tread type on
all four wheel positions.
Use only radial ply tires of the same size, load
range, and speed rating as the original
equi

Page 402 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual Tire Size
The following illustration shows an example of a
typical passenger vehicle tire size.
(A) Passenger (P-Metric) Tire:The United
States version of a metric tire sizing system.
The letter P as

Page 411 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual {CAUTION:
Mixing tires could cause you to lose
control while driving. If you mix tires of
different sizes, brands, or types (radial
and bias-belted tires), the vehicle may not
handle properly, and you

Page 412 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual Different Size Tires and Wheels
If you add wheels or tires that are a different size
than your original equipment wheels and tires,
this may affect the way your vehicle performs,
including its braking

Page 416 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual Tire Chains
{CAUTION:
If your vehicle has P215/60R16,
P225/50R17, or P225/50R18 size tires, do
not use tire chains. There is not enough
clearance.
Tire chains used on a vehicle without the
proper amou

Page 429 of 510

CHEVROLET MALIBU 2007 6.G Owners Manual 3. Place the tire (D) in the compartment, valve
stem up, with the bolt (E) extending through
the wheel center hole.
4. Place the jack and wheel wrench (D) over the
bolt (E), inside the wheel.
5. Secur
Page:   1-8 9-16 next >