2007 CHEVROLET KODIAK belt

Securing an Add-on Child Restraint
in the Vehicle
{CAUTION:
A child can be seriously injured or killed
in a crash if the child restraint is not
properly secured in the vehicle. Make sure
the child restraint is properly installed in
the vehicle using the vehicle’s safety belt,
following the instructions that came with
that restraint, and also the instructions
in this manual.
To help reduce the chance of injury, the child
restraint must be secured in the vehicle. Child
restraint systems must be secured in vehicle seats
by lap belts or the lap belt portion of a lap-shoulder
belt. A child can be endangered in a crash if
the child restraint is not properly secured in
the vehicle.When securing an add-on child restraint, refer
to the instructions that come with the restraint
which may be on the restraint itself or in a booklet,
or both, and to this manual. The child restraint
instructions are important, so if they are not
available, obtain a replacement copy from the
manufacturer.
Keep in mind that an unsecured child restraint can
move around in a collision or sudden stop and
injure people in the vehicle. Be sure to properly
secure any child restraint in your vehicle — even
when no child is in it.
52

In Canada, the law requires that forward-facing
child restraints have a top tether, and that
the tether be attached.
Your vehicle does not have lower anchors or top
tether anchors to secure a child restraint with
the LATCH system. If a national or local law
requires that your top tether be anchored, do not
use a child restraint in this vehicle because a
top tether cannot be properly anchored. You must
use the safety belts to secure your child restraint
in this vehicle, unless a national or local law
requires that the top tether be anchored. Refer to
your child restraint instructions and instructions
in this manual for securing a child restraint using
the vehicle’s safety belts.Securing a Child Restraint in a
Rear Outside Seat Position
(Crew Cab Models)
There are no top tether anchors in the rear
outside seat positions. Do not secure a child seat
in these positions if a national or local law
requires that the top tether be anchored, or if the
instructions that come with the child restraint
say that the top tether must be anchored.
You will be using the lap-shoulder belt. Be sure to
follow the instructions that came with the child
restraint. Secure the child in the child restraint
when and as the instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and
shoulder portions of the vehicle’s safety belt
through or around the restraint. The child
restraint instructions will show you how.
58

3. Buckle the belt. Make sure the release button
is positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.4. Pull the rest of the shoulder belt all the way
out of the retractor to set the lock.
59

5. To tighten the belt, push down on the child
restraint, pull the shoulder portion of the belt
to tighten the lap portion of the belt and
feed the shoulder belt back into the retractor.
If you are using a forward-facing child
restraint, you may find it helpful to use your
knee to push down on the child restraint
as you tighten the belt.
6. Push and pull the child restraint in different
directions to be sure it is secure.To remove the child restraint, just unbuckle the
vehicle’s safety belt and let it go back all the way.
The safety belt will move freely again and be
ready to work for an adult or larger child
passenger.
Securing a Child Restraint in the
Center Rear Seat Position (Crew Cab)
or Center Front Position
There are no top tether anchors in these positions.
Do not secure a child seat in these positions if a
national or local law requires that the top tether
be anchored, or if the instructions that come
with the child restraint say that the top tether must
be anchored.
You will be using the lap belt.
Be sure to follow the instructions that came with
the child restraint. Secure the child in the child
restraint when and as the instructions say. But do
not use the center front passenger position if
your vehicle has airbags, or if the child restraint
interferes with shifting gears.
60

{CAUTION:
A child in a child restraint in the center
front seat can be badly injured or killed
by the right front passenger airbag if it
inates. If your vehicle has airbags,
never secure a child restraint in the center
front seat. It is always better to secure
a child restraint in the rear seat if your
vehicle has one. You may secure a
forward-facing child restraint in the right
front passenger static seat, but before you
do, always move the front passenger seat
as far back as it will go. It is better to
secure the child restraint in a rear seat.1. Make the belt as long as possible by tilting
the latch plate and pulling it along the belt.
2. Put the child restraint on the seat.
3. Run the vehicle’s safety belt through or
around the restraint. The child restraint
instructions will show you how.
61

4. Buckle the belt. Make sure the release button
is positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.5. To tighten the belt, pull its free end while you
push down on the child restraint. If you are
using a forward-facing child restraint, you may
find it helpful to use your knee to push down on
the child restraint as you tighten the belt.
6. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, just unbuckle the
vehicle’s safety belt. It will be ready to work for an
adult or large child passenger.
62

{CAUTION:
If the airbag readiness light ever comes
on when you have turned off the airbag,
it means that something may be wrong
with the airbag system. The right front
passenger’s airbag could inate even
though the switch is off. If this ever
happens, do not let anyone whom the
national government has identied as a
member of a passenger airbag risk group
sit in the right front passenger’s position
(for example, do not secure a rear-facing
child restraint in the right front
passenger’s seat) until you have your
vehicle serviced. SeeAirbag Off Switch
on page 76andAirbag Readiness Light
on page 165for more on this, including
important safety information.You will be using the lap-shoulder belt. Be sure
to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.
1. If your vehicle has a right front passenger’s
airbag seeAirbag Off Switch on page 76.
If your vehicle has a right front passenger’s
airbag and your child restraint is
forward-facing, always move the seat as
far back as it will go before securing it in
this seat. SeeBucket Seats on page 9.
Never use a rear-facing child restraint in
this seat unless the airbag is off.
2. Put the child restraint on the seat.
3. Pick up the latch plate, and run the lap and
shoulder portions of the vehicle’s safety belt
through or around the restraint. The child
restraint instructions will show you how.
65

4. Buckle the belt. Make sure the release button
is positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.5. Pull the rest of the shoulder belt all the way
out of the retractor to set the lock.
66