2007 CHEVROLET AVALANCHE display

[x] Cancel search: display

Page 267 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual Language
This display allows you to select the language
in which the DIC messages will appear.
To select a language, do the following:
1. Press the trip odometer reset stem until
ODOMETER displays.
2.

Page 268 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual CHANGE ENGINE OIL SOON
This message displays when the engine oil needs
to be changed. When you change the engine
oil, be sure to reset the CHANGE ENGINE OIL
SOON message. SeeEngine Oil Life System
on

Page 269 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual ENGINE HOT A/C (Air Conditioning)
TURNED OFF
This message displays when the engine coolant
becomes hotter than the normal operating
temperature. SeeEngine Coolant Temperature
Gage on page 249. To avoi

Page 270 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual ENGINE OVERHEATED STOP ENGINE
Notice:If you drive your vehicle while the
engine is overheating, severe engine damage
may occur. If an overheat warning appears
on the instrument panel cluster and/or
DI

Page 271 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual LEFT REAR DOOR OPEN
This message displays and a chime sounds if
the driver’s side rear door is not fully closed and
the vehicle is in a drive gear. Stop and turn off
the vehicle, check the door for

Page 272 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual REMOTE KEY LEARNING ACTIVE
This message displays while you are matching
a Remote Keyless Entry (RKE) transmitter to your
vehicle. See “Matching Transmitter(s) to Your
Vehicle” underRemote Keyless

Page 273 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual SERVICE BATTERY CHARGING
SYSTEM
On some vehicles, this message displays if there
is a problem with the battery charging system.
Under certain conditions, the charging system
light may also turn on in

Page 274 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual SERVICE STABILITRAK
If your vehicle has StabiliTrak®and this message
displays, it means there may be a problem
with the StabiliTrak
®system. If you see this
message, try to reset the system. Stop; t