4. Remove the compact spare tire. SeeCompact
Spare Tire on page 475for more information
about the compact spare tire.
The tools you will be using include the jack (A)
and the wheel wrench (B).Removing the Flat Tire and
Installing the Spare Tire
1. Loosen the wheel nuts, but do not remove
them yet, using the wheel wrench. Turn the
handle about 180 degrees, then ip the handle
back to the starting position. This avoids
taking the wrench off the lug nut for each turn.
466
Storing a Flat or Spare Tire
and Tools
{CAUTION:
Storing a jack, a tire, or other equipment
in the passenger compartment of the
vehicle could cause injury. In a sudden
stop or collision, loose equipment could
strike someone. Store all these in the
proper place.
Full-Size Tire and Tools
After you have put the compact spare tire on your
vehicle, you will need to do the following to
store the at tire in your trunk.
1. Open the trunk. SeeTrunk on page 101.
2. Store the jack and wheel wrench in the jack
container in the trunk.
When storing the jack, in the container, it
must be raised until the screw end is ush with
the edge of the jack.
3. Store the at tire as far forward in the trunk as
possible.
The compact spare is for temporary use only.
Replace the compact spare tire with a full-size tire
as soon as you can.
473