Page 219 of 518

Automatic Operation
«A ª(Fan):Press this button until AUTO
appears on the display to place the system in
automatic mode. When automatic operation is
active, the system will automatically control the fan
speed. If in auto fan mode, pressing the up arrow
button will cancel automatic operation and places
the system in manual mode. If in auto mode,
pressing the down arrow will turn the rear climate
control system off.
«Nª(Mode):Press the this button until
AUTO appears on the display to place the system
in automatic mode. When automatic operation
is active, the system will automatically control
the air delivery mode.
Manual Operation
«A ª(Fan):Press these up or down arrow
buttons to increase or decrease the fan speed.
«bª(Temperature):Press these up or
down arrow buttons to increase or decrease the
temperature for the rear seat passengers. Once the
rear setting temperature is altered from followingthe front setting temperature, it will no longer follow
changes to the front setting temperature until the
front climate control AUX button resets it.
«Nª(Mode):Press these buttons to change
the air delivery mode. If in AUTO air delivery
mode, pressing the up arrow button will cancel
automatic operation and place the system in
manual mode.
Y(Vent):This mode directs air to the upper
outlets.
%(Bi-Level):This mode directs half the air
to the upper outlets, and the other half to the oor
outlets.
[(Floor):This mode directs the air to the oor
outlets.
For more information on how to use the front
climate control system, seeDual Climate Control
System on page 210.
For more information on the air outlets, seeOutlet
Adjustment on page 217. Be sure to keep the
area under the front seats clear of any objects
so that the air inside of your vehicle can circulate
effectively.
219
Page 245 of 518

RELEARN TIRE POSITIONS
After rotating the tires or after replacing a tire or
sensor, the Tire Pressure Monitor (TPM) system
must re-learn the tire positions. To re-learn the tire
positions, seeTire Pressure Monitor System on
page 414. SeeTire Inspection and Rotation on
page 418andDIC Warnings and Messages on
page 246for more information.
RELEARN REMOTE KEY
This display allows you to match Remote Keyless
Entry (RKE) transmitters to your vehicle. To match
an RKE transmitter to your vehicle, do the following:
1. Press the vehicle information button until
PRESS
VTO RELEARN REMOTE KEY
displays.
2. Press the set/reset button until REMOTE KEY
LEARNING ACTIVE is displayed.3. Press and hold the lock and unlock buttons
on the rst transmitter at the same time for
about 15 seconds.
On vehicles with memory recall seats, the rst
transmitter learned will match driver 1 and
the second will match driver 2.
A chime will sound indicating that the
transmitter is matched.
4. To match additional transmitters at this time,
repeat Step 3.
Each vehicle can have a maximum of
eight transmitters matched to it.
5. To exit the programming mode, you must
cycle the key to OFF.
Blank Display
This display shows no information.
245
Page 339 of 518

If you put things inside your vehicle, like suitcases,
tools, packages, or anything else, they will go as
fast as the vehicle goes. If you have to stop or turn
quickly, or if there is a crash, they will keep going.
{CAUTION:
Things you put inside your vehicle can
strike and injure people in a sudden stop
or turn, or in a crash.
Put things in the trunk of your vehicle.
In a trunk, put them as far forward as
you can. Try to spread the weight
evenly.
Never stack heavier things, like
suitcases, inside the vehicle so that
some of them are above the tops of
the seats.
Do not leave an unsecured child
restraint in your vehicle.
When you carry something inside the
vehicle, secure it whenever you can.
Automatic Level Control
This feature keeps the rear of your vehicle level
as the load changes. It is automatic, you do
not need to adjust anything.
This type of level control is fully automatic and will
provide a better leveled riding position as well
as better handling under a variety of passenger
and loading conditions. An air compressor
connected to the rear shocks will raise or lower
the rear of the vehicle to maintain proper vehicle
height. The system is activated when the
ignition key is turned to RUN and will automatically
adjust vehicle height thereafter. The system
may exhaust (lower vehicle height) for up to
ten minutes after the ignition key has been turned
to OFF. You may hear the air compressor
operating when the height is being adjusted.
339
Page 408 of 518