2007 BMW MOTORRAD K 1200 R suspension

[x] Cancel search: suspension

Page 4 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) Table of ContentsYou can also consult the index at
the end of this Riders Manual if
you want to find a particular topic
or item of information.
1 General instructions . . . . . 5
Overview . . . . . .

Page 9 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) ESA Electronic SuspensionAdjustment
Electronic Suspension
Adjustment.
RDC Tyre pressure control
(ReifenDruck-Control)EquipmentWhen you ordered your BMW
motorcycle, you chose various
items of custom eq

Page 13 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) General view, left side1Clutch-fluid reservoir
( 105)
2 Adjuster for spring preload,
rear ( 61)
3 Seat lock (underneath rear
light) ( 66)
4 Adjuster for damping char-
acteristic, rear suspension
( 62)

Page 45 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) Operation
Operation
Ignition switch and steering lock..... 44
Electronic immobiliser (EWS) ........ 45
Clock ................................ 46
Odometer and tripmeters ............ 47
On-board comput

Page 63 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) Push the protective cap over
the threaded fastener.Spring preloadSettingIt is essential to set spring pre-
load of the rear suspension to
suit the load carried by the mo-
torcycle. Increase spring pre

Page 64 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) Adjusting damping for
rear wheelMake sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust the rear shock absorber,
using the tool from the on-
board toolkit to turn adjust

Page 65 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) The damping characteristic is
shown in panel1of the multi-
function display, and spring pre-
load in panel 2. The odometer
readings are not shown while
the ESA readout is active. Three
spring preload

Page 66 of 168

BMW MOTORRAD K 1200 R 2007  Riders Manual (in English) Adjusting suspension
dampingSwitch on the ignition.You can adjust the damp-
ing characteristic while the
motorcycle is on the move.
Press button 1.
The current setting is
displayed.
Press button 1once
Page:   1-8 9-16 next >