If the motorcycle is to re-
main abroad for a lengthy
period, you can have the display
readouts changed from miles to
kilometers or vice versa, if neces-
sary. Under these circumstances
consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Press button1.The display starts with the cur-
rent value and each time the but-
ton is pressed it moves one step
through the following sequence:
Odometer (
ODO
)
Tripmeter 1 (
Trip I
)
Tripmeter 2 (
Trip II
)
Clock
Battery voltage
Residual range on reserve
quantity of fuel (once fuel level
is down to reserve)
Resetting tripmeterSwitch on the ignition.Select the desired tripmeter.
Press and hold down button1.
The tripmeter is reset to zero.
Setting clockSwitch on the ignition.
You can make this adjust-
ment only when the motor-
cycle is at a standstill.
Select the clock.
429zOperation
Ignition
Switching on and off, 28
Ignition switch, 27
Instrument cluster
Overview, 17
J
Jump starting, 95
K
Keys, 28
L
Laying up, 106
Lights
High-beam headlight, 31
Low-beam headlight, 31
Side light, 31
Low-beam headlight, 18
Luggage
Correct loading, 61
M
Maintenance, 123
Notes, 64Mirrors
Adjusting, 33
Motorcycle
Care, 103
Laying up, 106
Overview, 11, 13
Parking, 51
Restoring to use, 106
Multifunction display
See display, 17
N
Number-plate carrier
Removing and installing, 100
O
Odometer and tripmeters, 20
Resetting, 17, 29
Off-roading
Notes, 49
P
Pneumatic pump, 34
Removing and installing, 34
Power socket, 11, 60
Pre-ride check, 47R
Rear-wheel drive
Technical data, 113
Refuelling, 52
Restoring to use, 106
Rider's Manual
Stowage, 14
Running gear
Technical data, 113
Running in, 48
S
Safety instructions, 44
Seat
Lock, 13
Removing and installing, 41
Service, 122
Service Card, 122
Side light, 18
Spark plugs
Technical data, 117
Speedometer, 20
Standards, 7
Starter, 16
Starting, 46
12133zIndex
