2007 BMW M5 SEDAN tire pressure reset

Technology for comfort, convenience and safety
82 change. This change is detected and is
reported as a flat tire.
Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must be initialized for the cor-
rect tire inflation pressure.
The initialization must be repeated after
each time the tire inflation pressure is cor-
rected and after every tire or wheel change.<
System limits
The Flat Tire Monitor cannot indicate
sudden severe tire damage caused by
outside factors and does not detect a natural,
even pressure drop in all four tires.<
In the following situations, the system could be
delayed or malfunction:
>System has not been initialized
>Driving on snowy or slippery road surface
>Sporty driving style: slip in the drive wheels,
high lateral acceleration
>Driving with snow chains
*
Initializing system
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is con-
tinued automatically. Do not initialize the sys-
tem when driving with snow chains.<
With Sequential Manual Transmission via the
button in the center console:
1.Start the engine, but do not start driving.
2.Press the button at least 4 seconds, how-
ever not longer than 2 minutes. After
releasing the button, the warning lamp in
the instrument cluster lights up yellow for a
few seconds. Warning lamp, refer to Indica-
tion of a flat tire. The message "Initializing
FTM ..." appears on the Control Display for
a few seconds.3.Start to drive. The initialization finishes dur-
ing driving without feedback.
Via iDrive, for explanation of principle, refer to
page16:
1.Press the button.
This opens the start menu.
2.Press the controller to open the menu.
3.Turn the controller until "Settings" is
selected and press the controller.
4.Select "Vehicle / Tires" and press the con-
troller.
5.Change to upper field if necessary. Turn the
controller until "FTM" is selected and press
the controller.
6.Start the engine, but do not start driving.
7.Select "Reset" and press the controller.
ba8_m5us.book Seite 82 Montag, 5. Februar 2007 12:03 12

Controls
83Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
8.Select "Yes" and press the controller.
"resetting FTM …" is displayed for a few
seconds. The warning lamp in the instru-
ment cluster lights up yellow for a few sec-
onds.
9.Start to drive.
The initialization finishes during driving
without feedback.
Indication of a flat tire
The warning lamp lights up red. A mes-
sage appears on the Control Display.
In addition, an acoustic signal sounds.
There is a flat tire or extensive inflation pressure
loss.
1.Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering
maneuvers.
2.Identify damaged tire. To do this, check the
tire inflation pressure using the M Mobility
System, refer to Producing tire inflation
pressure on page215.
3.Repair flat tire with M Mobility System, refer
to page213, or replace the damaged wheel,
refer to Changing wheels on page215.
TPM Tire Pressure Monitor*
The concept
TPM checks the tire inflation pressure in the
four mounted tires. The system reports when
the tire inflation pressure has dropped consid-
erably in one or several tires.
Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must have been reset with the
correct tire inflation pressure.
Always use wheels with TPM electronics, oth-
erwise fault-free operation of the system is not
ensured.
Reset the system again after each correc-
tion of the tire inflation pressure and after
every tire or wheel change.<
System limits
TPM cannot announce sudden serious
tire damage caused by external influ-
ences.<
The system does not function properly if it has
not been reset, e.g. a flat tire is reported despite
correct tire inflation pressures.
The system is inactive and cannot display a flat
tire if a wheel has been mounted without TPM
electronics, or if TPM is temporarily interfered
with by other systems or devices which use the
same radio frequency.
Status display on Control Display
The tire and system status is indicated by the
color of the tires.
TPM takes the fact that the tire pressure
changes during driving into account. A correc-
tion is only required if requested by TPM with
the color.
Green
The tire pressure matches the learned set state.
"TPM active" is displayed on the Control Dis-
play.
One wheel is yellow
Flat tire or a major drop in inflation pressure in
the indicated tire. A message appears on the
Control Display.
ba8_m5us.book Seite 83 Montag, 5. Februar 2007 12:03 12

Technology for comfort, convenience and safety
84
All wheels are yellow
Flat tire or a major drop in inflation pressure in
several tires. A message appears on the Control
Display.
Gray
The system cannot detect a flat tire.
Reasons for this can be:
>TPM is being reset
>Temporary interference due to systems or
devices which use the same radio fre-
quency
>Malfunction
Resetting system
Reset the system again after each correc-
tion of the tire inflation pressure and after
every tire or wheel change.<
Resetting finishes during driving, which can be
interrupted at any time. When driving resumes,
resetting is continued automatically.
iDrive, for explanation of principle, refer to
page16.
1.Press the button.
This opens the start menu.
2.Press the controller to open the menu.
3.Select "Settings" and press the controller.
4.Select "Vehicle / Tires" and press the con-
troller.
5.Change to upper field if necessary. Turn the
controller until "TPM" is selected and press
the controller.
6.Start the engine, but do not start driving.
7.Select "Reset" and press the controller.8.Select "Yes" and press the controller.
9.Start to drive.
The tires are shown in gray and "Resetting
TPM..." is displayed.
After a few minutes of driving, the set tire infla-
tion pressures in the tires are applied as the set
values to be monitored. Resetting finishes dur-
ing driving. The tires are shown in green on the
Control Display.
If a flat tire is detected during resetting
and applying the tire inflation pressures,
all tires are shown in yellow on the Control Dis-
play. The message "Tire low!" is displayed.<
Message with low tire inflation
pressure
The warning lamp lights up yellow. A
message appears on the Control Dis-
play. In addition, an acoustic signal
sounds. There is a flat tire or extensive inflation
pressure loss.
1.Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering
maneuvers.
2.If all four wheels are shown in yellow, iden-
tify the damaged tire on the vehicle.
3.Repairing flat tire with M Mobility System,
refer to page213, or replace the damaged
wheel or wheels, refer to Changing wheels*
on page215.
The spare tire
* is equipped with the necessary
TPM electronics and is also monitored after
mounting and after resetting the system.
Have the tire replaced by a BMW center or a
workshop informed on handling TPM which
ba8_m5us.book Seite 84 Montag, 5. Februar 2007 12:03 12

Wheels and tires
198
Wheels and tires
Tire inflation pressure
Information for your safety
The condition of the tires and the maintenance
of the specified tire pressure are crucial not only
to the tire's service life, but also to driving com-
fort and most importantly, driving safety.
Checking pressure
Only check tire inflation pressure when the tires
are cold. This means after a maximum of
1.25 miles/2 km driving or when the vehicle has
been parked for at least 2 hours. When tires are
warm, the tire inflation pressure increases.
Check the tire inflation pressure regularly
and correct if necessary, including on the
spare wheel
*: at least twice a month and before
starting long trips. Otherwise driving instability
or tire damage, and therefore accidents, can
result from incorrect tire inflation pressures. Do
not drive with a depressurized, i.e. flat, tire. A flat
tire will seriously impair your vehicle's handling
and braking response. Attempts to drive on a
flat tire can lead to a loss of control over the
vehicle.<
After correcting the tire inflation pressure,
reinitialize the Flat Tire Monitor, refer to
page82, or reset the Tire Pressure Monitor,
refer to page84.<
Pressure specifications
The tables below provide all the correct inflation
pressures for the specified tire sizes at ambient
temperature.
The inflation pressures apply to the tire
sizes and tire brands respectively
approved and recommended by BMW; a list of
these is available from your BMW center. tion pressure for your tires, observe the follow-
ing:
>Tire sizes of your vehicle
>Load conditions
>Maximum allowable driving speed
Tire inflation pressures for speeds
up to 100 mph/160 km/h
For normal driving up to 100 mph/160 km/h,
adjust pressures to the respective tire inflation
pressures listed on the following pages in the
column Traveling speeds up to max. 100 mph/
160 km/h to achieve optimum driving comfort.
These pressure specifications can be found on
the door post when you open the driver's door.
The permissible top speed for these tire
inflation pressures is 100 mph/160 km/h.
Do not exceed this speed, otherwise tire dam-
age and accidents may result.<
Tire inflation pressures for speeds
above 100 mph/160 km/h
In order to drive at maximum speeds in
excess of 100 mph/160 km/h, please
observe, and, if necessary, adjust tire pressures
for speeds exceeding 100 mph/160 km/h from
the relevant table on the following pages. Oth-
erwise tire damage and accidents could
occur.<
ba8_m5us.book Seite 198 Montag, 5. Februar 2007 12:03 12

Reference 245
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Outside temperature
display66
– changing unit of measure75
– in computer75
Overview
– operating principle17
– radio control146
– screen display20
P
"P 400"58
"P 500"58
"P 500 Sport"58
Panic mode31
Park Distance Control PDC77
"Parked car operation"100
"Parked car ventilation"100
Parked car ventilation99
– activating activation
time100
– preselecting activation
times100
– switching on and off
directly100
Parked car ventilation system,
LED95
Parking, vehicle56
Parking aid, refer to PDC Park
Distance Control77
Parking assistant, refer to
PDC Park Distance
Control77
Parking brake, refer to
Handbrake57
Parking lamps91
– indicator lamp13
Parking lamps/low beams,
indicator lamp13
Parts and accessories6
Passenger-side exterior
mirror, tilting down48
"Pathway lighting"92
Pathway lighting92
"PDC"78
"PDC display on"78
PDC Park Distance Control77Personal Profile29
"Perspective"136
"Phone"174,176,179
Phone book178
– changing entry180
– creating and editing voice
phone book184
– deleting all entries181
– deleting entry181
– dialing phone number180
Phone numbers
– deleting from phone
book181
– dialing179
– most recent numbers181
– selecting in phone book181
– Top 8181
Pinch protection system
– glass sunroof, electric39
– power windows38
Plasters, refer to First-aid
kit220
Plastic, refer to Caring for your
vehicle brochure
"Play" on the radio158
Plug-in unit for remote
control, refer to Ignition
lock55
Pollen, refer to Microfilter/
activated charcoal filter99
Position
– displaying142
– storing130
"POWER"51
POWER, refer to M Engine
Dynamic Control58
Power failure218
Power windows, refer to
Windows37
Preselecting activation times
of the parked car
ventilation100
"Presets" on the
radio150,157
Pressure, tires198
– producing with M Mobility
System213Pressure monitoring of tires,
refer to TPM Tire Pressure
Monitor83
"Profile"193
Programmable button on
steering wheel49
Programmable memory
buttons21
Programming button function,
refer to Programmable
button on steering wheel49
Protective function, refer to
Pinch protection system
– glass sunroof, electric39
– windows38
R
Radio
– autostore152
– controls146
– High Definition Radio154
– sampling stations151
– satellite radio156
– selecting frequency
manually151
– selecting
waveband146,150
– station search151
– station selection150
– station with the best
reception152
– storing stations152
– switching on/off146
– tone control147
– volume147
– Weather Band, refer to
Weather news flashes154
Radio key, refer to Keys/
remote control28
Radio position, refer to Radio
readiness55
Radio readiness55
– switched off56
– switched on55
– with comfort access37
Radio stations, storing152
ba8_m5us.book Seite 245 Montag, 5. Februar 2007 12:03 12

Everything from A to Z
250 Tools, refer to Onboard
toolkit210
"Top 8" for mobile phone180
Torque
– lug bolts, refer to After
mounting217
– refer to Engine data226
Touch tone dialing, refer to
Tone dialing method182
Tow bar222
Tow fitting221
Towing221
– methods222
– tow fittings221
– with manual
transmission222
– with Sequential Manual
Transmission222
– with Sequential Manual
Transmission with
Drivelogic222
"Town / City" for destination
entry123
Tow rope222
Tow-starting221
"TPM"84
TPM Tire Pressure
Monitor83
– resetting system84
– system limits83
– warning lamp84
Tracks
– random sequence162
– sampling on CD161
– selecting with CD160
Track width, refer to
Dimensions227
Traction control, refer to DSC
Dynamic Stability
Control79
Traffic congestion
– displaying traffic
information138
– refer to Bypassing route
sections138Traffic information for
navigation
– depiction in route map140
– displaying139
– during destination
guidance141
– symbols141
Traffic information with
navigation138
"Traffic Info settings"139
Transmission
– breaking-in112
– Drivelogic60
– idle59
– manual transmission57
– reverse gear59
– Sequential Manual
Transmission with
Drivelogic58
– shift lights61
– starting assistant, refer to
Starting off on slopes113
– towing222
– tow-starting222
Transporting children
safely52
Transport securing device,
refer to Securing cargo116
Tread depth, refer to Minimum
tire tread200
Treble, refer to Tone
control147
"Treble", tone control148
"Trip computer"68
Trip computer68
Trip-distance counter, refer to
Trip odometer65
"Triple turn signal"62
Trip odometer65
Trunk, refer to Cargo bay
Turning circle, refer to
Dimensions227
Turning lamps93
– replacing bulbs211
Turn signals61
– indicator lamp12
– replacing bulbs212
U
"Unchanged"51,61
Underbody protection, refer to
Caring for your vehicle
brochure
Uniform Tire Quality Grading/
UTQR199
"Units"75
Units
– average fuel
consumption75
– temperature75
Universal garage-door
opener, refer to Integrated
universal remote
control102
Universal remote control102
"Unlock button"30
Unlocking
– from inside33
– from outside30
– without key, refer to Comfort
access36
Unlocking without key, refer to
Comfort access36
"Update services"191
Upshift display, refer to Shift
lights61
USB/audio interface166
"USB" in audio
mode165,167
"Use current location as
address"130,132
Used batteries
– refer to Disposal218
– refer to Replacing battery37
Using turn signals62
ba8_m5us.book Seite 250 Montag, 5. Februar 2007 12:03 12