2007 BMW M5 jacking

Mobility
211Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
transmission, or select a drive position with the
selector level for a sequential transmission.
Have all vehicle occupants get out of the vehicle
and ensure that they remain outside the imme-
diate area in a safe place, such as behind a
guardrail.
If a warning triangle
* or portable hazard warning
lamp
* is required, set it up on the roadside at an
appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.
Change the wheel only on a level, firm surface
which is not slippery. The vehicle or the jack
could slip to the side if you attempt to raise the
vehicle on a soft or slippery surface such as
snow, ice, tiles, etc.
Position the jack on a firm support surface.
Do not use a wooden block or similar object as a
support base for the jack, as this would prevent
it from extending to its full support height and
reduce its load-carrying capacity.
To avoid serious or fatal injury: never lie under
the vehicle, and never start the engine while it is
supported by the jack.<
What you will need
To avoid rattling noises later on, note the posi-
tions of the tools before removing them, then
return them to their initial positions after com-
pleting work.
1Chock
*
2Vehicle jack*
3Lug wrench*
The tools are located in the hollow of the spare
wheel.
Spare wheel*
1.Pull back lock1, fold open tensioning lock2
completely and loosen the belt3.
2.Remove the cover4.
3.Take the tool mount out of the spare wheel.
4.Remove the spare wheel.
Preparing wheel change
1.Observe the safety precautions above.
2.Prevent the vehicle from rolling:
Place the chock behind the front wheel on
the other side of the vehicle, or on inclines,
in front of this wheel. On a steep grade, take
other steps to prevent the vehicle from roll-
ing.
3.Loosen the lug bolts a half turn.
Jacking up vehicle
1.Position the vehicle jack at the jacking point
closest to the wheel so that the entire sur-
face of the jack base rests on the ground
perpendicularly beneath the jacking point.
The vehicle jack is designed for
changing wheels only. Do not attempt
to raise another vehicle model with it or to
raise any load of any kind. To do so could
cause accidents and personal injury.<

Replacing components
212 2.Guide the jack head into the rectangular
recess of the jacking point when cranking
up, refer to illustration detail.
3.Jack the vehicle up until the wheel you are
changing is raised from the ground.
Mounting a wheel
1.Unscrew the lug bolts and remove the
wheel.
2.Remove accumulations of mud or dirt from
the mounting surfaces of the wheel and
hub. Also clean the lug bolts.
3.Position the new wheel or spare wheel.
Secure the wheel by screwing at least two
lug bolts into opposite bolt holes.
When you mount wheels other than Genu-
ine BMW light-alloy wheels, different lug
bolts may also be required.
4.Screw in the remaining lug bolts. Tighten all
the bolts securely in a diagonal pattern.
5.Lower the vehicle and remove the jack from
beneath the vehicle.
After mounting
1.Tighten the lug bolts in a diagonal pattern.
To ensure safety, always have the
lug bolts checked with a calibrated
torque wrench as soon as possible to
ensure that they are tightened to the speci-
fied torque. The tightening torque is
88.5 lb ft/120 Nm.<
2.Check and correct the tire inflation pressure
at the earliest opportunity.
Protect valve stems with valve stem
seal caps against dirt and contamina-tion. Dirt in valve stems is a frequent source
of gradual air loss.<
3.Initialize the Flat Tire Monitor, refer to
page83, and the Sequential Manual Trans-
mission, refer to After changing wheels/
tires on page198.
4.Replace the damaged tire as soon as possi-
ble and have the new wheel/tire balanced.
Stowing wheel and tools
1.Lay the wheel in the tool mounting.
2.Lay the cover on the mounting.
3.Center the wheel and cover relative to the
lashing eyes5.
4.Hook the belt into the lashing eyes.
5.Completely open the tensioning lock.
6.Thread the belt3 through the axis6 of the
tensioning lock without twisting it and ten-
sion it by hand.
7.Tighten the belt firmly with the tensioning
lock by opening and closing the lock several
times.
8.Fold the tensioning lock closed and stow
the protruding belt end.
Driving with spare wheel
With certain wheel-and-tire combinations
the size of the spare wheel differs from
that of the other wheels. The spare wheel is
equivalent to them in all load and speed ranges.
However, to restore the original state, the nor-
mal wheel should be remounted as soon as
possible.<

Reference 239
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Instrument panel, refer to
Cockpit10
Instrument panel, refer to
Instrument cluster12
Integrated key28
Integrated universal remote
control102
Interesting destination for
navigation127
"Interim time"74
Interior lamps94
– switching on with remote
control31
Interior motion sensor35
– switching off36
Interior rearview mirror48
– automatic dimming
feature48
Intermittent mode of the
wipers62
J
Jacking points211
Joystick, refer to iDrive16
Jumpering, refer to Jump
starting215
Jump starting215
K
Keyless-Go, refer to Comfort
access36
Keyless opening and closing,
refer to Comfort access36
Key Memory, refer to Personal
Profile29
"Keypad"177
Keys28
– key-related settings, refer to
Personal Profile29
– spare key28
Knock control193
L
Lamps, refer to Parking lamps/
low beams92Lamps and bulbs206
"Language / Units"76
"Language / Units" for
navigation136
"Languages"77
"Languages" for
navigation136
Lashing eyes, refer to
Securing cargo116
Last destinations, refer to
Destination list128
"Last seat pos."44
LATCH child restraint fixing
system53
LEDs light-emitting
diodes206
Length, refer to
Dimensions223
License plate lamp, replacing
bulbs208
Light-emitting diodes
LEDs206
Lighter106
"Lighting"62,93
Lighting
– instruments94
– lamps and bulbs206
– of the vehicle, refer to
Lamps92
Light switch92
"Limit"73
Loading
– securing cargo116
– stowing cargo115
– vehicle114
Load securing equipment,
refer to Securing cargo116
"Lock after driving"33
Lock buttons in the doors,
refer to Locking33
Locking31
– confirmation signals31
– from inside33
– from outside31
– without key, refer to Comfort
access36Locking and unlocking doors
– confirmation signals31
– from inside32
– from outside30
LOGIC 7148
Low beams92
– automatic92
– indicator lamp13
Lower back support, refer to
Lumbar support42
Lug bolts211
– tightening torque, refer to
After mounting212
– wrench211
Luggage compartment lid33
– comfort access37
– emergency release34
– locking with remote
control31
– opening from inside33
– opening from outside33
– opening with remote
control31
– unlocking and locking from
inside32
Luggage rack, refer to Roof-
mounted luggage rack116
Lumbar support42
LW, waveband150
M
MDynamic Mode MDM80
– indicator lamp13,80
M Engine Dynamic Control61
– "P 400"61
– "P 500"61
– "P 500 Sport"61
M Mobility System208
M+S tires, refer to Winter
tires198

Reference 247
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Towing216
– methods217
– tow fittings216
– with manual
transmission217
– with Sequential Manual
Transmission with
Drivelogic217
"Town / City" for destination
entry122
Tow rope217
Tow-starting216
"TPM"85
TPM Tire Pressure
Monitor84
– resetting system85
– system limits84
– warning lamp85
Track
– sampling on CD161
– selecting with CD160
Tracks
– random play sequence162
Track width, refer to
Dimensions223
Traction control, refer to DSC
Dynamic Stability
Control80
Traffic congestion
– bypassing140
– displaying traffic
information137
– refer to Bypassing route
sections137
"Traffic Info"137
Traffic information for
navigation
– depiction in route map139
– displaying138
– during destination
guidance140
– symbols139
Traffic information with
navigation137
– selecting stations138Transmission
– breaking-in112
– Drivelogic60
– idle58
– manual transmission57
– reverse gear58
– Sequential Manual
Transmission with
Drivelogic58
– shift lights60
– starting assistant, refer to
Starting off on slopes113
– towing216
– tow-starting217
Transporting children
safely52
Transport securing device,
refer to Securing cargo116
Tread depth, refer to Minimum
tire tread196
"Treble", refer to Tone
control148
Treble, refer to Tone
control147
"Trip computer"69
Trip computer69
Trip-distance counter, refer to
Trip odometer66
"Triple turn signal"62
Trip odometer66
Trunk, refer to Cargo bay
Turning circle, refer to
Dimensions223
Turn signals62
– indicator lamp12
– replacing bulbs207
U
"Unchanged"50,60
Underbody protection, refer to
Caring for your vehicle
brochure
Uniform Tire Quality Grading/
UTQR196
"Units"76Units
– average fuel
consumption76
– temperature76
Universal garage-door
opener, refer to Integrated
universal remote
control102
Universal remote control102
"Unlock button"30
Unlocking
– from inside33
– from outside30
– without key, refer to Comfort
access36
Unlocking without key, refer to
Comfort access36
"Update services"186
Upshift display, refer to Shift
lights60
"Use current location as
address"129,131
Used batteries
– refer to Disposal213
– refer to Replacing battery37
Using turn signals62
V
Valve screw caps, refer to
After mounting212
Vehicle
– battery213
– breaking-in112
– care205
– care, refer to Caring for your
vehicle brochure
– loading114
– measurements, refer to
Dimensions223
– parking57
– washing, refer to Caring for
your vehicle brochure
– weights224
"Vehicle / Tires" for MDrive50
"Vehicle / Tires" for
unlocking30
Vehicle jack211
– jacking points211