Corrosion Protection
Extensive corrosion protection measures imple-
mented by BMW now make it possible to offer a
twelve-year unlimited mileage anti-corrosion
warranty against rust perforation on your vehicle
provided that the vehicle is maintained in accor-
dance with the provisions of the New Vehicle
Limited Warranty as outlined in the Warranty
Section of this Booklet (page 32).
The major degree of corrosion protection is due
to the electrophoretic dip painting process which
cathodically deposits paint particles on all body
parts, attracting paint particles into the minutest
cavities or seams. Body parts are designed to
provide optimum corrosion protection.
During manufacture, exterior body parts receive
an additional corrosion protection coat. Hood,
trunk, doors and other body parts are coated with
PVC and sealed from the outside.
All floor panels receive a resilient coating of PVC
for maximum protection against damage due to
stones, etc.
Corrosion protection materials tested over many
years are applied to the surfaces of cavities and
to the entire underside of the vehicle during and
after assembly.
Requirements for maintaining the 12-year unlim-
ited mileage anti-corrosion warranty are outlined
in the Warranty Section of this Booklet (page 34).
Restoring corrosion protection
Please take care that anti-corrosion material is
replaced when your car is repaired after body or
chassis damage.
BMW will not accept any liability for any parts
and accessories not approved by BMW.
Underbody maintenance
The underbody has to be cleaned at least once a
year, in spring, with plain water in order to remove
mud, chemical sediments and other deposits. If
those materials are not removed, corrosion (rust)
will occur on metal components.
Your BMW center will do this anti-corrosion ser-
vice for you.
WARNING
Do not apply additional undercoating or rust-
proofing on or near the exhaust manifold, exhaust
pipes, catalytic converter or heat shields. During
driving, the substance used for undercoating could
overheat and cause a fire.
17
BMW Import Processing Centers
As a BMW owner, you will experience BMW qual-
ity first hand. Our dedication to excellence in
design, engineering, and service is among the
best in the world. And we invest heavily every
year in our people and facilities to ensure that our
quality standards are consistently applied from
the factory to the BMW center.
Each BMW is inspected after its manufacture.
Imperfections in the mechanical and electrical
systems or damage to the sheet metal, paint, trim
or other components of the vehicle that may
occur during transportation from the factory are
normally detected and corrected. Any defect in
material or workmanship that may occur during
the warranty period is covered under the New
Vehicle Limited Warranty.
BMW Roadside Assistance
The BMW Roadside Assistance Program
reflects BMWs commitment to your complete
satisfaction with the BMW ownership
experience.
It is available for U.S. version BMWs in all 50
states, Canada, and Puerto Rico 24 hours a day,
365 days a year.
It is a valuable benefit provided to you at no addi-
tional cost. (Subject to certain limitations and
exclusions noted on page 30).
Owners Eligibility
You are covered if your vehicle is:
– A new BMW automobile, distributed by BMW NA, and purchased at an authorized BMW cen-
ter, OR;
– A new BMW automobile, purchased under the BMW NA European Delivery Plan, OR;
– A new, U.S. version, BMW automobile pur- chased under the Diplomatic or Military Sales
programs, operated in any of the 50 states,
Canada and Puerto Rico.
Coverage is provided for the vehicle itself,
regardless of the driver. Protection:
New BMWs — Protection is provided for 4 years/
unlimited miles. NOTE: This does not affect war-
ranty coverage which remains at 4 years/50,000
miles.
Certified Pre-Owned BMWs — 6 years/unlimited
miles from the in-service date.
Getting Started
A temporary Roadside Assistance card can be
found inside your vehicle portfolio. It contains the
24-hour toll-free number for Roadside
Assistance.
For your convenience a decal which shows the
same information as the Roadside Assistance
card, has been affixed to the tool kit cover on the
trunk lid.
In a few weeks you will receive a permanent
Roadside Assistance card by mail. Your date of
purchase and vehicle identification number (VIN)
are embossed on the card.
This card should be carried by the driver of your
BMW.
Calling For Assistance
The toll-free BMW Roadside Assistance number
(1 800 332-4269) is answered by a BMW Road-
side Assistance service representative. In order
for you to receive quick and reliable services, it is
essential that you provide detailed and accurate
information to the service representative.
Be prepared to give:
1. Your name and address.
2. Your complete Vehicle Identification Number
(found on your vehicle registration, your per-
manent Roadside Assistance card or on the
bottom drivers side of your windshield).
3. Model description of your vehicle.
4. Date of purchase.
5. License plate number of your vehicle.
6. Vehicle location (including nearby cross- roads/intersections, highway mile markers,
street numbers, landmarks, etc.).
28
