2007 BMW 3 SERIES sensor

Exclusions from coverage
– Items reimbursable under your New Vehicle
Limited Warranty.
– Gasoline.
– Windshield washer additive (except when in
conjunction with scheduled maintenance).
– Tires, wheel alignment, tire balance and
rotation.
– Wear and tear of soft trim items, such as: seats,
carpets, moldings, headliner, door panels and
all chrome trim.
– Damage detected when performing the rust
perforation inspection.
– Damage which results from negligence,
improper operation of the vehicle, wear and tear
or deterioration due to driving habits or condi-
tions, improper repair, environmental influ-
ences, flood, accident or fire damage, road salt
corrosion, alteration, installation of non-BMW
accessories, or use of improper, poor quality or
contaminated fuel.
– Altered or unreadable Vehicle Identification
Number (VIN) or odometer irregularities or vehi-
cles where the true mileage cannot be
determined.
– Maintenance or repair after the vehicle is
deemed a total loss.
– Maintenance or repairs performed by other
than an Authorized BMW center within the
United States or Puerto Rico.
– Vehicles used in competitive events.
– Oil changes performed outside the recom-
mended maintenance intervals as indicated by
the Service Interval Display.
Maintenance Upgrade Option
Please contact your authorized BMW center for
information and availability on the optional Main-
tenance Program Upgrade for coverage up to 6
years and 100,000 miles.
Maintenance Program
The BMW Maintenance Program has been
devised with the following objectives: to maxi-
mize vehicle safety, reliability, and resale value byminimizing breakdowns resulting from wear, and
minimizing cost and inconvenience by comput-
ing maintenance intervals based upon the spe-
cific manner in which each individual vehicle is
driven.
Maintenance intervals on motor vehicles have
conventionally been specified based upon accu-
mulated mileage. However, driving conditions
have a major influence on routine maintenance
requirements; distance traveled is only one of the
significant factors. A vehicle driven for 50,000
miles of short trips in the city with numerous cold
starts, prolonged periods of idling, stop-and-go
driving, and high engine speeds during accelera-
tion requires more frequent maintenance inter-
vals than a vehicle driven for 50,000 miles for
long distances at low engine speeds primarily at
operating temperature.
The advanced technologies at BMW have led to
the development of the unique BMW Condition
Based Service (CBS) system which computes
the actual optimum maintenance requirements
based not only upon the accumulated mileage,
but taking into account important factors such as
high or low engine speeds, short or long trip driv-
ing, and condition of the engine oil and brake
pads.
The BMW Maintenance Program
Condition Based Service (CBS)
CBS is a further development of the Service
Interval Indicator System. Sensors and sophisti-
cated algorithms take even more detailed
account of the various conditions of vehicle use.
The remaining times for selected maintenance
tasks as well as any legally prescribed dates are
displayed to you individually:
Engine oil
2

Green lamps
No service is currently required.
You can request more detailed information on
every entry.
Turn the controller to scroll through the list, then
confirm the selected entry.
Confirm to exit the list.
The vehicles current service status is automati-
cally saved in the vehicles ignition key. The Ser-
vice Advisor at your BMW center has a device
called a key reader. When your Service Advisor
inserts your key into the key reader, all pertinent
vehicle and servicing data will be available, and a
customized maintenance checklist is printed out
based on the specific operations called for by the
Condition Based Service.
The performance of certain subsequent mainte-
nance elements, as required by the BMW New
Vehicle Limited Warranty, will be specified at
intervals computed by the BMW Service Interval
Indicator as follows:
– Oil Service: Engine oil should be changed with
the engine at operating temperature.Note:
Change oil at least once a year.
All 2007 model year 3 Series vehicles are facto-
ry-filled with BMW High Performance Synthetic
oils. At the time of the printing of this booklet, the
following oils are strongly recommended and
approved by BMW:
•BMW High Performance 5W-30 Synthetic Oil
(BMW part number 07 51 0 017 866)
•Mobil 1 0W-40
BMW is evaluating various synthetic oils for
inclusion in our list of recommended engine oils.
For the most current list of synthetic oils, please
contact your BMW center, or call BMW of NorthAmerica, LLC. at 1 800 831-1117. You can also
obtain this information from our website,
www.bmwusa.com/.
BMW recommends that you check your engine
oil level whenever you add fuel to your vehicle. If
you need to add oil between oil changes and are
unable to obtain BMW High Performance Syn-
thetic Oil, Mobil 1 or another special oil on the
list, use a synthetic oil with an API rating of SH or
higher.
The following maintenance elements must be
performed at the mileage/time stated (time inter-
vals begin from the vehicles production date):
– Brake Fluid Service: Change brake fluid every
two years, or when specified by CBS.
– Oxygen Sensor Service: The oxygen sensor
deteriorates strictly on a mileage basis and
must therefore be replaced every 120,000
miles to maximize vehicle fuel economy and
minimize exhaust pollution. For the 328i
SULEV (PZEV) models, the oxygen sensor
must be replaced every 150,000 miles. The
replacement of the oxygen sensor is required
under the terms of the applicable BMW emis-
sion system warranties.
– Spark Plug Service:
328i — Replace at 100,000 miles, or when
specified by CBS.
335i — Replace at 45,000 miles, or when spec-
ified by CBS.
– The engine coolant has a lifetime rating and
does not need to be changed.
For your convenience, you may also wish to have
your BMW center perform any necessary opera-
tions to fulfill any state inspection requirements
in your area concurrent with the maintenance
elements specified above during other repairs.
Make sure that confirmation of maintenance
work is always entered in this Service and War-
ranty Information Booklet. You may need this for
any warranty claims that become necessary, and
later on as evidence that your car has been given
the correct and regular maintenance that justifies
its resale or trade-in value.
BMW has applied the most modern technologi-
cal advances not only to the design and produc-
tion of your vehicle, but also to computing of the
4

Emission Control Maintenance
Schedule
The maintenance schedule as shown is required
for the proper functioning of the emission control
systems for optimum vehicle performance and
fuel economy.
Basic Engine
Engine oil As specified by CBS
Engine oil filter As specified by CBS
Fuel System
Air filter As specified by CBS
Ignition System
Spark plugs As specified by CBS
Emission Control
Components
Oxygen sensor (except
SULEV)120,000 miles
Oxygen sensor:
SULEV(PZEV)150,000 miles
Battery Care
If your car is driven only for short distances of
less than 10 miles over a prolonged period of
time, without an occasional drive at highway
speeds, the engines charging system will not
maintain the battery. Insufficient use of the vehi-
cle could result in short term starting problems
and in the long term could damage the battery.
In case the car is not operated for several weeks
it is advisable to:
a. consider using a proper trickle charger, follow-
ing the charger manufacturers instructions, to
maintain the batterys state of charge; or
b. consult your BMW center regarding battery
removal. Once removed, the battery must be
charged and stored in a cool, dry place where
it can be protected from freezing. If the battery
will be stored for over 3 months, it must be
recharged every 3 months, or else it will
become damaged and useless.
Please consult with your BMW center for further
guidance and information.
Corrosion Protection
Extensive corrosion protection measures imple-
mented by BMW now make it possible to offer a
twelve-year unlimited milage anti-corrosion war-
ranty against rust perforation on your vehicle pro-
vided that the vehicle is maintained in
accordance with the provisions of the New Vehi-
cle Limited Warranty as outlined in the Warranty
Section of this Booklet (page 31).
The major degree of corrosion protection is due
to the electrophoretic dip painting process which
cathodically deposits paint particles on all body
parts, attracting paint particles into the minutest
cavities or seams. Body parts are designed to
provide optimum corrosion protection.
During manufacture, exterior body parts receive
an additional corrosion protection coat. Hood,
trunk, doors and other body parts are coated with
PVC and sealed from the outside.
All floor panels receive a resilient coating of PVC
for maximum protection against damage due to
stones, etc.
Corrosion protection materials tested over many
years are applied to the surfaces of cavities and
to the entire underside of the vehicle during and
after assembly.
Requirements for maintaining the 12-year unlim-
ited mileage anti-corrosion warranty are outlined
in the Warranty Section of this Booklet (page 32).
Restoring corrosion protection
Please take care that anti-corrosion material is
replaced when your car is repaired after body or
chassis damage.
BMW will not accept any liability for any parts
and accessories not approved by BMW.
15

will notify you in writing of the reason(s). The
BMW center is required by law to honor the claim
if notice of denial is not received by the owner
within the specified time period.
You may obtain further information concerning
the emission warranties, or report violations of
warranty terms, by contacting the Director, Field
Operations and Support Division (6406J), Envi-
ronmental Protection Agency, 401 M Street, SW,
Washington, D.C. 20460.
The following systems are covered by the Fed-
eral Emission Performance Warranty for a period
of two years or 24,000 miles, whichever occurs
first. The specific systems may vary according to
model, therefore, all of the systems listed may
not be used on your vehicle. For assistance in
determining which systems and specific compo-
nents within these systems apply to your vehicle,
please contact your BMW center.
AIR INDUCTION SYSTEM
FUEL METERING SYSTEM
IGNITION SYSTEM
POSITIVE CRANKCASE VENTILATION
SYSTEM (PCV)
FUEL EVAPORATIVE CONTROL SYSTEM
EXHAUST SYSTEM
ENGINE EMISSION CONTROL SYSTEM
SENSORS/DEVICES
ON BOARD DIAGNOSTIC SYSTEM (OBD)
RELATED PARTS ASSOCIATED WITH THE
ABOVE SYSTEMSThe following components and/or system are/is
covered under the Federal Emission Warranty for
a period of 8 years or 80,000 miles, whichever
occurs first.
CATALYTIC CONVERTER
ENGINE CONTROL MODULE (INCLUDING
ON-BOARD DIAGNOSTIC SYSTEM)
For assistance in determining coverage of the
specific components of the on-board diagnostic
system, please contact your BMW center.
36

California Emission Warranty Parts
List
The following components are covered for
defects by the California Emission Control Sys-
tem Limited Warranty for a period of 7 years or
70,000 miles, whichever comes first:
Component 328i 335i
CATALYTIC
CONVERTER••
CYLINDER HEAD
COVER GASKET••
ENGINE CONTROL
MODULE••
EXHAUST
MANIFOLD GASKET••
EXHAUST
MANIFOLD
W/CATALYST•
EXHAUST PIPE
W/CATALYST••
FUEL FILLER NECK••
FUEL TANK••
HIGH PRESSURE
FUEL PUMP•
INTAKE MANIFOLD••
INTAKE MANIFOLD
ADJUSTER UNIT•
OXYGEN SENSOR••
THROTTLE BODY•
TORQUE
CONVERTER••
TRANSMISSION
CONTROL MODULE••
TURBOCHARGER•
VALVETRONIC
SENSOR••
VANOS (VVT)
ADJUSTMENT UNIT••
Notice
The National Traffic Motor Vehicle Safety Act of
1966 requires manufacturers to be in a position
to contact the vehicle owners when a correction
of a product defect becomes necessary. Please
fill in the attached postcard if you change your
address or purchase a used BMW.
Tire Warranty Statement
Tires are warranted by their respective manufac-
turer as detailed in the applicable tire manufac-
turers warranty statements. Instructions for
proper tire care and maintenance are contained
in the Owners Manual. Should you experience
difficulty in obtaining warranty service from a tire
manufacturer, your authorized BMW center will
assist you in resolving the difficulty.
California Emission Warranty —
SULEV (PZEV)
Certain 2007 328i models are certified to Califor-
nia’s stringent Super Ultra Low Emission Vehicle
(SULEV) standards and also qualify as a Partial
Zero Emission Vehicle (PZEV) under the Califor-
nia Air Resources Board Zero Emission Vehicle
program. In addition to very low tailpipe and zero-
evaporative emissions, this PZEV certification
includes a unique warranty when the vehicle is
registered in California, Massachusetts, Maine,
New York, Connecticut, Rhode Island or Vermont.
SULEV(PZEV) models registered in Oregon and
Washington are covered by the California Emis-
sions Warranty; this coverage is described begin-
ning on page 37.
The emission certification standard can be veri-
fied on the Vehicle Emission Control Information
label located in the engine compartment. A rep-
resentative label is shown on page 1.
40