2007 Alfa Romeo GT ESP

2.0 JTS
2.0 JTS
Selespeed
937A1000
Otto
4 in line
83 x 91
1970
11.5 : 1
121
165
6400
206
21
3250
NGK PFR6B
NGK BKR6EKPA
Unleaded
petrol
95 RON2.0 JTS (**)
932A2000
Otto
4 in line
83 x 91
1970
11.5 : 1
119
163
6400
201
20
3250
NGK PFR6B
NGK BKR6EKPA
Unleaded
petrol
95 RONJTD16V
937A5000
Diesel
4 in line
82 x 90.4
1910
17.5 : 1
110
150
4000
305
31
2000
Diesel fuel for motor
vehicles
(Specification EN 590) 3.2
V6
936A000
Otto
6 in 60° V
93 x 78
3179
10 : 1
176,5
240
6200
300
30.6
4800
NGK PFR6B
Unleaded
petrol
95 RON 1.8 T. SPARK
AR32205
Otto
4 in line
82.7
1747
11.5 : 1
103
140
6500
163
16.6
3900
NGK PFR6B+
NGK PMR7A
NGK BKR6EKPA+
NGK PMR7A
Unleaded
petrol
95 RON
TECHNICAL SPECIFICATIONS
242
ENGINE
(*) There are two different spark plugs for each cylinder, one per type (**) For versions/markets where applicable
To change plugs contact Alfa Romeo Authorized Services.
Code type
Cycle
Number and position of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum horsepower (EEC):
kW
HP
at rpm
Maximum torque (EEC):
Nm
kgm
at rpm
Spark plugs (*)
Fuel

TECHNICAL SPECIFICATIONS
243
FUEL SUPPLY
Alterations or repairs to the fuel supply system carried out incorrectly and without taking account of
the technical features of the system, may cause operating faults with the risk of fire.
TRANSMISSION
Supply
2.0 JTS
Direct electronic injection
Gearbox
Clutch
Drive
2.0 JTS
Five forward gears plus
reverse with
synchronisers for forward
speeds
Dry single disk with
hydraulic control
Front
JTD16V
Six forward gears plus
reverse
all synchronised
Dry single disk with
hydraulic control
Front
JTD16V
Common Rail direct injection
with supercharging
3.2V6
Direct electronic injection
3.2V6
Six forward gears plus
reverse all synchronised
Dry single disk with
hydraulic control
Front
2.0 JTS Selespeed
Five forward gears and
reverse with electronic
control system
Dry single disk with
electrohydraulic control
Front
1.8 T. SPARK
Multipoint electronic injection
1.8 T. SPARK
Five forward gears plus
reverse with
synchronisers for
forward speeds
Dry single disk with
hydraulic control
Front

TECHNICAL SPECIFICATIONS
247
Maximum speed index
Q= up to 160 km/h.
R= up to 170 km/h
S= up to 180 km/h.
T= up to 190 km/h.
U= up to 200 km/h.
H= up to 210 km/h.
V= over 210 km/h.
ZR= over 240 km/h.
W= up to 270 km/h.
Y= up to 300 km/h.
Maximum speed index
for snow tyres
Q M +S= up to 160 km/h.
T M +S= up to 190 km/h.
H M +S= up to 210 km/h. Load index (capacity)
60= 250 kg
61= 257 kg
62= 265 kg
63= 272 kg
64= 280 kg
65= 290 kg
66= 300 kg
67= 307 kg
68= 315 kg
69= 325 kg
70= 335 kg
71= 345 kg
72= 355 kg
73= 365 kg
74= 375 kg
75= 387 kg
76= 400 kg
77= 412 kg
78= 425 kg
79= 437 kg
80= 450 kg
81= 462 kg
82= 475 kg
83= 487 kg
84= 500 kg85= 515 kg
86= 530 kg
87= 545 kg
88= 560 kg
89= 580 kg
90= 600 kg
91= 615 kg
92= 630 kg
93= 650 kg
94= 670 kg
95= 690 kg
96= 710 kg
97= 730 kg
98= 750 kg
99= 775 kg
100= 800 kg
101= 825 kg
102= 850 kg
103= 875 kg
104= 900 kg
105= 925 kg
106= 950 kg
CORRECT RIM READING
Below, please find the instructions needed
to understand the meaning of the code
stamped on the rim, as shown in (fig. 5).
Example:
6,5 J x 15 H2 ET 43
6,5=rim width in inches (1)
J=rim drop centre outline (side pro-
jection where the tyre bead
rests) (2)
15=rim nominal diameter in inches
(corresponds to diameter of the
tyre to be mounted) (3=Ø)
H2=“hump” shape and number (relief
on the circumference holding the
Tubeless tyre bead on the rim).
ET 43=camber angle (distance between
disk/rim line and wheel rim cen-
tre line)

TECHNICAL SPECIFICATIONS
249
COLD TYRE INFLATION PRESSURE
With the tyre hot the inflating pressure should be +0.3 bar compared with the specified rating
With winter tyres the inflation pressure should be +0,2 bar compared with the specified rating
PERFORMANCE
1.8 T. SPARK2.0 JTS 2.0JTS 3.2 V6JTD16VSelespeed
Maximum speed in km/h 200 216 216 243 209 Tyres
195/60 R15bar
205/60 R15bar
205/55 R16bar
205/55 ZR16bar
215/45 R17bar
225/45 ZR17bar
225/40 ZR18bar
Compact spare wheel
125/80 R15bar
reduced load
front rear
2.2 2.2
2.3 2.3
2.3 2.3
2.3 2.3
2.4 2.3
2.5 2.4
2.5 2.4
4.2full load
front rear
2.5 2.5
2.6 2.6
2.6 2.6
2.6 2.6
2.7 2.6
2.8 2.7
2.8 2.7
4.2

TECHNICAL SPECIFICATIONS
251
Kerb weight
(with fuel oil and fluids,
spare wheel, tools
and accessories) kg
Payload (*) including
driver kg
Max permissible
weights (**):
– front axle kg
– rear axle kg
– total kg
Towable weights:
– braked trailer kg
– trailer without brake kg
Maximum load on ball
(braked trailer) kg
WEIGHTS
(*) With special equipment (trailer towing device, etc.) the loadless weight increases, thereby reducing the payload, with regard to the maximum permissi-
ble loads.
(**) Loads not to be exceeded. It is the driver’s responsibility to place goods in the boot and/or on the loading surface in accordance with the maximum
permissible loads.
JTD16V
1320
520
990
980
1885
1300
400
60
3.2V6
1410
520
1040
980
1930
1400
400
60
2.0 JTS
1320
520
980
980
1840
1300
400
60
1.8 T. SPARK
1290
520
980
980
1810
1300
400
60

REFILLING
2.0JTS
Selespeed
63 (
▲)
7 (▲)
7,2
4.4
(❍)
2.0
0.6
1.2
0.52
2.5
4.2
3.2V6
63 (▲)
7 (▲)
7.2
5.9
(❍)
2.0
–
1.2
0.52
2.5
4.2
1.8 T.
SPARK
63 (▲)
7 (▲)
7.2
4.4 (❏)
2.0
–
1.2
0.52
2.5
4.2
2.0JTS
63 (
▲)
7 (▲)
7.2
4.4
(❍)
2.0
–
1.2
0.52
2.5
4.2TECHNICAL SPECIFICATIONS
252
JTD16V
63 (■)
7 (■)
7.2
4.5 (
●)
2.0
–
1.2
0.52
2.5
4.2
Fuel tank: litres
– including a reserve of litres
Engine cooling system litres
Oil sump and filter litres
Mechanical transmission/differential litres
Selespeed transmission litres
Hydraulic power steering litres
Hydraulic brake circuit
with ABS litres
Windscreen washer and rearscreen
washer fluid reservoir litres
– with headlamp washer litresRecommended products and
genuine lubricants
(▲)Unleaded petrol with no less than
95 R.O.N
(■)Diesel fuel for motor vehicles
(Specification EN590)
Mixture of distilled water
andPARAFLU UP at 50%
(❏)SELENIA 20 K for Alfa Romeo(❍)SELENIA RACING(●)SELENIA WR
TUTELA CAR TECHNYX
TUTELA CAR CS SPEED
TUTELA GI/A
TUTELA TOP 4
for Alfa Romeo
Mixture of water and fluid
TUTELA
PROFESSIONAL SC 35

TECHNICAL SPECIFICATIONS
254
Brake fluid
Protective agent for radiators
Windscreen and rear window
washer fluid Lubricants and greases for
transmissions Use
Fluid and lubricant specifications
for correct car operation
Synthetic-based oil, grade SAE 75W-85
that passes API GL-4 PLUS, FIAT 9.55550
Lubricant for automatic transmissions that passes
“ATF DEXRON II D LEV” specification
Specific fluid for gear selector electrohydraulic actuators
Molibdenum disulphide, lithium soap based grease.
Synthetic fluid, F.M.V.S.S. n. 116, DOT 4, ISO 4925, SAE J-1704
Protective with antifreeze action, red colour based on inhibited monoethylen
glycol and organic formula, that passes CUNA NC 956-16,
ASTM D 3306 specifications
Mixture of alcohol and surfactants CUNA NC 956-11Genuine fluids
and lubricants
TUTELA
CAR TECHNYX
TUTELA GI/A
TUTELA CAR CS SPEED
TUTELA STAR 500
TUTELA TOP 4
for Alfa Romeo
PARAFLU
UP
TUTELA
PROFESSIONAL SC 35Applications
Mechanical gearbox and
differential
Hydraulic power steering
Selespeed
electrohydraulic actuator
CV joints
on wheel side
Brake and clutch
hydraulic controls
Cooling circuits.
Proportion:
50% down to –35° C.
Not to be mixed with
products having different
formulas.
To be used diluted or
undiluted

TECHNICAL SPECIFICATIONS
255
FUEL CONSUMPTION
The fuel consumption figures given in the
table below are determined on the basis of
the homologation tests set down by specif-
ic European directives.
The procedures below are followed for
measuring consumption:
–urban cycle: cold starting followed by
driving that simulates urban use of the car;–extra-urban cycle: frequent accel-
erating in all gears, simulating extraurban
use of the car; the speed varies between 0
and 120 km/h;
–combined consumption: is calcu-
lated weighing about 37% of urban cycle
consumption and about 63% of extraurban
consumption.
3.2V6
18.6
8.7
12.4JTD
16V
8.7
4.8
6.2 2.0 JTS
12.2
6.7
8.7 1.8 T. SPARK
12.1
6.4
8.52.0 JTS
Selespeed
12.2
6.7
8.7
IMPORTANT The type of route,
traffic situations, weather conditions,
driving style, general conditions of
the vehicle, trim level/equip-
ment/accessories, load, presence of
a roof rack, use of the climate con-
trol system, other situations that af-
fect air drag may lead to different fu-
el consumption levels than those
measured (see “Reducing running
costs and environment pollution” in
the chapter “Correct use of the car”).
Fuel consumption according to directive 1999/100/EC(litres x 100 km)
Urban
Extraurban
Combined