49
3
INSTRUMENTS AND CONTROLS
+
+–
–
Illumination Int.Speed Limit Light Sens. Reset Trip B
Clock
Mode 12/24 Date Indep.Boot Unlock Fda Door Lock Units LanguageBeep Vol.Service Beep Seatb.Quit setup
Day lights
+–
+–+–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
56
3
Scheduled maintenance (Service)
This function allows you to view when service is
due according to the mileage done.
To view this information, proceed as follows:
- briefl y press the MENU button: the display
shows when service is due in kilometres
or miles depending on the unit that was
previously set (see the chapter “Unit of
measure”);
- press the MENU button briefl y to return to
the menu page or hold it down to return to
the standard screen page.
WARNING: According to the Scheduled
Maintenance Plan, the vehicle must be
serviced every 10,000 km (or 6,000 mi). This
information is automatically displayed when the
electronic key is inserted in the ignition block,
starting from 2,000 km (or 1,200 mi) following
the service due date. The information will be
displayed in kilometres or miles depending on
the unit of measure set. When approaching the
scheduled maintenance (“Service”) due date,
inserting the electronic key in the ignition block,
a message will appear on the display followed
by the kilometres/miles left until the service due
date. Contact an Authorised Service Centre of
the Manufacturer’s Network where the staff
will perform the service operations according to
the Scheduled Maintenance or Annual Inspection
Plan and reset the mileage counter (Reset).
Buzzer reactivation for SBR (Seat Belt
Reminder) signalling (Seat belt beep)(where
provided)
This function is displayed only after the system
has been deactivated by an Authorised Service
Centre of the Manufacturer’s Network.
Automatic activation of the Day Running
Lights (where provided)
If this function is active, when the low-beams go
off, the DRLs come on, and vice versa, when the
low-beams come on the DRLs go off.
Exit menu
Select this item to return to the standard screen
page.
129
5
USING THE VEHICLE
RESETTING THE SPEED
STORED IN THE MEMORY
The speed stored in the memory is automatically
zero-reset:
- by turning the engine off
or
- by setting the switch
A to OFF.
CAUTION
When driving with Cruise
Control activated, do not shift to
neutral. It is advisable to activate
Cruise Control only when traffic and
road conditions permit safe use of
this device, that is: on straight and
dry roads, expressways or highways,
smooth-flowing traffic and smooth
asphalt. Do not activate the device in
the city or in heavy traffic.CAUTION
Cruise Control can only be
activated at speeds exceeding 30
km/h.
CAUTION
The device can only be turned
on in 4
th 5th or 6
th gear, depending on
the vehicle speed.
CAUTION
When driving downhill with
the device active, the vehicle may
pick up speed slightly exceeding the
speed stored in the memory due to the
change in engine load.
CAUTION
If the device malfunctions or
fails to operate, set the switch A to
OFF and contact an Authorised Service
Centre of the Manufacturer’s Network
after checking that the protection fuse
has not blown.CAUTION
Switch A can be left on the ON
position at all times, without damaging
the device. In any case, it is advisable
to deactivate the device when it is
not in use. Move switch A to the OFF
position to prevent speeds from being
unintentionally stored.
216
9
IT IS ESSENTIAL THAT YOU READ THIS MANUAL! .. 3
Consulting the Manual ...................................... 4
Abbreviations ................................................... 4
Updating ......................................................... 4
Service ........................................................... 5
“Q-Select” ..................................................... 5
Audio and IT systems ........................................ 5
Towing the vehicle ............................................ 5
Symbols ..............................................................6
Danger symbols .............................................. 6
Symbols of prohibitions ..................................... 6
Warning symbols .............................................. 7
Symbols indicating mandatory measures .............. 7
Vehicle identifi cation data ......................... 11
Identi cation plates and labels ..........................12
Chassis marking ............................................. 12
Engine marking .............................................. 12
Paint identifi cation label .................................. 12
Vehicle identifi cation plate ............................... 13
Electronic key ....................................................14
Code Card ..................................................... 14
Alfa Romeo Code System ...................................14
Operation ...................................................... 14Active and passive safety ......................... 17
Seat belts .........................................................18
Fastening the seat belts .................................. 18
Load limiting devices ...................................... 18
Pretensioners ................................................. 19
General warnings regarding the use
of the seat belts .......................................... 20
Safe transport of children ................................ 22
Groups 0 and 0+ ........................................... 23
Group 1 ........................................................ 24
Group 2 ........................................................ 24
Group 3 ........................................................ 25
Front airbags .....................................................26
“Smart bag” system (multistage front airbags) .. 28
Driver’s front airbag ........................................ 29
Passenger’s front airbag .................................. 29
Passenger’s airbag manual deactivation switch ... 30
General warnings .......................................... 31
VDC system .......................................................33
Activation ...................................................... 33
Failure signals ................................................ 33
ASR system (electronic anti-skid device) ..............34
Activation ...................................................... 35
Fault indicators .............................................. 35
MSR function
(engine braking torque adjustment) ............... 35
ABS and EBD systems .........................................36Fuel cut-out inertia switch ...................................38
Resetting the switch ....................................... 38
Instruments and controls .......................... 41
Dashboard .........................................................42
Instrument panel ...............................................45
Recon gurable multifunction display .................46
Information shown on the standard page .......... 46
Control buttons .............................................. 47
Menu .......................................................... 47
TRIP ............................................................. 47
+/- .............................................................. 47
Setup menu .................................................. 48
Trip computer ................................................. 57
TRIP button ................................................... 58
Warning lights and messages .............................60
General warnings ........................................... 60
Indicators and warning lights ............................ 61
Warning lights on the display .......................... 63
Instruments and gauges .....................................66
Tachometer/speedometer ............................... 66
Rev. Counter .................................................. 66
Fuel gauge .................................................... 67
Coolant thermometer ...................................... 67
Engine oil thermometer ................................... 68
Controls ............................................................68
Controls to the left of the steering wheel ........... 69
TABLE OF
CONTENTS