Page 209 of 272
208
When topping up take
care not to confuse the
various types of fluids:
they are all incompatible and
could seriously damage the car.
If the vehicle is fre-
quently used for towing
trailers, the interval be-
tween one programmed mainte-
nance and the next should be re-
duced.
Vehicle maintenance
should be entrusted to
the Alfa Romeo Service
Network. For ordinary and minor
operations you can do yourself,
always make sure you have ade-
quate tools, original Alfa Romeo
spares and the correct fluids. Do
not carry out these operations if
you have no experience.
Never smoke during
work in the engine com-
partment: there is the possibility
of inflammable gas and vapours
with the risk of fire.
WARNING
Page 225 of 272

224
– Insert a new blade passing it through
the curved top of the arm (A) through
the slot.
– Lift the blade to clamp tab (B) of the
coupling spring with the curved top of the
arm.
IMPORTANT The blades may differ
according to the versions. In any case,
follow the instructions provided in the
packs available as spares from Alfa
Romeo Authorized Services.WINDSCREEN WIPER
BLADES
(fig. 17)
Periodically clean the wiper blades and
ensure that they are not damaged. If the
rubber blades are bent of worn in parts
they should be replaced, as follows:
– Press the tab (B) of the blade catch
spring and push the blade towards the
base of the arm (A).
– When the catch spring has been freed
from the curved top of the arm, withdraw
the blade from the arm through the slot. The spark plugs must be
changed at intervals
given in the Pro-
grammed Maintenance Schedule.
Only use spark plugs of the spec-
ified type (see table of “Fuel
Supply and Ignition” in the
“Technical specifications” chap-
ter): if the thermal grade is inad-
equate, or the foreseen life is
not guaranteed inconveniences
may result.
SPARK PLUGS
If the engine is running unevenly have
the spark plugs checked by Alfa Romeo
Authorized Services.
624PGSm
fig. 17
Page 238 of 272
237
LUGGAGE COMPARTMENT
WEIGHTS
(*) Loads not to be exceeded. It is the owner’s responsibility to place loads in the boot and/or on the loading surface within the maximum permissible weight limits.
(**) With special fittings (sunroof, trailer towing device, etc.) the unloaded weight increases, thereby reducing the useful capacity with regard to maximum permissible
loads.
3.2 V6 24V JTD 20VMultijet
Capacity (dm3) 490 490
3.2 V6 24V JTD 20V
Multijet
Weight empty (including fluids, 90% fuel in the tank and no optional) 1540 kg 1540 kg
Max. permitted weight (*) 2050 kg 2050 kg
Payload including
driver (**) 510 kg 510 kg
Towable weight 1500 kg 1500 kg
Max. load on ball 60 kg 60 kg
Page 266 of 272

265
Radio ........................................122
Radio-frequency remote control ........251
Radio transmitters and cellular
telephones ..............................156
Rain sensor ....................................61
Rear fog guards ..............................94
Rear roof lamps ............................101
Rear seat ........................................35
Rearscreen heating ..........................86
Refuelling......................................236
Relay (replacement) ......................186
Reversing lights..............................178
RPM counter....................................71
Safeguarding the emission
control devices ..........................150
Safeguarding the environment ........129
Safety belts ....................................40
Ski compartment ............................35
Snow chains..................................147Spark plugs ..................................224
Starting device ............................26-27
Stationary vehicle ..........................138
Steering........................................242
Steering column stalks ......................57
Steering lock ..................................27
Steering wheel (adjustment lever) ......36
STR system (Sport Throttle Response) 63
Sun visors ....................................100
Sunroof ........................................103
Supply/ignition ............................238
Technical specifications..........231
Telephone (provision) ....................102
Third stop light (bulb change) ..........180
Top speeds ....................................239
Tow hook ..............................153-154
Towing the car or another vehicle......196
Towing trailers ..............................152
Transmission ................................242Travelling ......................................137
Tyres
- Correct reading ........................248
- Inflation pressure ......................247
- Winter tyres ............................147
Useful accessories ........................156
VDC (system)..............................117
VDC and ASR systems ....................117
Vehicle inactivity ............................155
Vehicle lifting ................................197
Warning lights ..............................73
Weights ........................................237
Wheel rims....................................245
Windscreen wiper ............................61
Wing mirrors ..................................37
Page 267 of 272

PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Alfa Romeo has been developing its global commitment towards the safeguarding and protection of the Environment through
the continuous improvement of its production processes and the making of increasingly more “eco friendly” products. With a view to guar-
anteeing the best possible service to clients in full observance of environmental standards and in response to the obligations imposed by Eu-
ropean Directive 2000/53/EC on end-of-life vehicles, Alfa Romeo offers its clients the possibility to hand in their vehicle* at the end of its
life span without additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same incurring expenses
due to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of the countries of the
European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehicles registered from 1 July 2002
on, while, from 2007 on, take-back will be carried out free of charge, independently of the year of registration, provided that the vehicle
still contains all its essential component parts (especially engine and body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality service to our customers
by de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find out the location of your nearest authorised
treatment facility, offering free of charge take-back, simply contact one of our dealers or refer to the Alfa Romeo web site or call the toll free
number 00800 2532 0000.
*
Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t