IN AN EMERGENCY
237
Remove the cover (A-fig. 73) to
gain access to the following relays/fuses
(fig. 74):
A.Engine radiator cooling fan 2
ndspeed
relay (T.SPARK versions).
B.Engine radiator cooling fan 1
stspeed re-
lay.
C.Fuel pump relay
D.Electronic injection relay
E.Climate control compressor relay
F.Timing variator relay (1.6 T.SPARK on-
ly) or engine radiator fan 2
ndspeed relay
(only 2.5 V6 24V, JTD and JTD 16V Multi-
jet versions).
G.Fuel oil heater relay (only Diesel ver-
sions).For JTD 20v Multijet version refer to
fig. 75For Diesel versions, depending on the op-
tions installed, there is a second bracket fas-
tened to the engine compartment rear bulk-
head for the following fuses (fig. 76):
A.MAXI-FUSE 30A: additional passenger
compartment heater 2
ndlevel relay.
B.MAXI-FUSE 30A: additional passenger
compartment heater 1stlevel relay.
WARNINGStrictly observe the specified
fuse ampere value: in case of doubt, con-
tact Alfa Romeo Authorized Services.
fig. 74
A0B0183m
fig. 76
A0B0619m
fig. 75
A0B0618m
IN AN EMERGENCY
240
Remote controlControls lighting/Stop lightsRear control lighting from sidelightsSeat heating/Sunroof/Seat electrical adjustmentAir bag system
ABS systemAlfa Romeo CODE systemClimate control system
Engine cooling radiator fan:
First speed
– T.SPARK and JTS versions
– diesel versions
– 2.5 V6 24V versions
Second speed
– T.SPARK and JTS versions
– diesel versions– 2.5 V6 24V versionsPassenger compartment fan (petrol versions)Passenger compartment fan (diesel versions)
Electronic ignition and injection system Glow plugs and resistances on fuel oil filter (diesel versions)69
71
71
71
71
68
71
71
69
68
68
68
68
68
68
68
68
71
71
71
68
68 10A
10A
10A
30A
10A (*)
60A
10A (*)
7.5A
15A
50A
60A
40A
30A
40A
40A
40A
40A
7.5A
15A
15A
30A
70A 13
3
6
8
2 (*)
9
11 (*)
13
9
6
6
6
7
7
7
1
4
13
14
15
5
8SERVICES FUSE AMPERES FIGURE
TECHNICAL SPECIFICATIONS
321
UseLubricants and greases
for transmissionsBrake fluidProtective agent for radiatorsAdditive for fuel oil
Windscreen/
rearscreen/headlampwasher fluid
(*) IMPORTANTDo not add or mix with fluids with specifications other than the specified ones.Quality features of fluids and lubricants
for correct vehicle operation
Synthetic-based engine oil, SAE 75W-80 EP grade that passes API GL5
and MIL-L-2105 D Lev specifications
SAE 75W-85 completly synthetic engine oil.
Meets API GL 4 and ZF TE ML06 (B&C) LEVEL, ALLISON C4 specifications
“ATF DEXRON II D LEV”, type oil
“ATF DEXRON III” type specific oil
“ATF DEXRON II D LEV”, SAE 10W type oil
Lithium-soap-based grease with molybdenum bisulphate.
Consistency NLGI 2
FMVSS n° 116 DOT 4, ISO 4925, SAE J1704,
CUNA NC 956-01 synthetic fluid
Protective with antifreeze action, blue color, based on inhibited monoethylene
glycol, CUNA NC 956-16
Protective with antifreeze action, red colour, based on inhibited monoethylen
glycol, with O.A.T.-based organic formula, that passes CUNA NC 956-16,
ASTM D 3306 specifications
Additive for fuel oil with protective action for Diesel engines
Mixture of spirits and surface-active agents CUNA NC 956-11Recommended fluids
and lubricants
TUTELA CAR
ZC 75 Synth
TUTELA CAR
MATRYX
TUTELA GI/2
TUTELA CAR
CS SPEED
TUTELA GI/A
TUTELA MRM 2
TUTELA CAR TOP 4
for Alfa Romeo
PARAFLU 11 (*)
or
PARAFLU UP (*)
DIESEL MIX
TUTELA
PROFESSIONAL
SC 35
Applications
Mechanical gearbox and
differential
Mechanical gearbox and
differential for high
temperatures
Automatic gearbox
Selespeed transmission
electrically-operated
electrohydraulic drive
Hydraulic power steering
C.V. joints
Hydraulic brake and
clutch control
Cooling ducts
Percentage:
50% down to –35°C
To be mixed with the fuel
oil (25 cc per 10 litres)
To be used neat
or diluted
