2007 Acura TSX automatic transmission

CONTINUED
Your Vehicle at a Glance
You r Vehicle at a Glance
3
POWER WINDOW
SWITCHES AUDIO SYSTEM
AUTOMATIC
TRANSMISSION
MANUAL
TRANSMISSION
DRIVING POSITION
MEMORY SYSTEM
CLIMATE CONTROL
SYSTEM
(P.142)
(P.146)
(P.147) (P.160)
(P.170)
Vehicle without navigation system is shown. (P.135) PARKING BRAKE LEVER(P.151) PASSENGER’S FRONT AIRBAG
DRIVER’S FRONT AIRBAG
GAUGES(P.68)
MIRROR CONTROLS (P.9
, 26 )
(P.9, 33)
POWER DOOR LOCK
MASTER SWITCH POWER DOOR LOCK
MASTER SWITCH
INSTRUMENT PANEL INDICATORS
(P.130)
(P.246)
(P.244)
(P.129)
HOOD RELEASE
HANDLE (P.232)
TRUNK RELEASE LEVER
FUEL FILL DOOR RELEASE
LEVER (P.231) (P.62)

Control Locations
60
INSTRUMENT PANEL INDICATORS
TRUNK RELEASE LEVER AUDIO
SYSTEM
HOOD RELEASE HANDLE AUTOMATIC
TRANSMISSION
MANUAL
TRANSMISSION
PARKING BRAKE LEVER
POWER
WINDOW
SWITCHES MIRROR
CONTROL AUTO BUTTON
DRIVING POSITION
MEMORY SYSTEM
CLIMATE CONTROL
SYSTEM
Vehicle without navigation system is shown.
(P.142)
(P.147)
(P.151)(P.160)
(P.170)
(P.145)
GAUGES (P.68)
MIRRORS CONTROLS
(P.146) (P.62)
POWER DOOR LOCK
MASTER SWITCH
(P.129)
FUEL FILL DOOR RELEASE
LEVER
(P.232) (P.244) (P.246)
(P.135)
(P.231)

If there is a problem in the anti-lock
brake system (ABS), you will see
‘‘CHECKABSSYSTEM’’onthe
multi-information display. If you see
this message, have your vehicle
checked by a de aler (see page ).
If
there is a problem with the
automatic transmission, you will see
‘‘CHECK TRANSMISSION’’ on the
multi-information display. Avoid
rapid acceleration, and have the
transmission checked by a dealer as
soon as possible. If
there is a problem with your front
airbags, side airbags, passenger’s
side airbag automatic cutoff system,
automatic seat belt tensioners, side
curtain airbags, driver’s seat position
sensor, or the front passenger’s
weight sensors, you will see
‘‘CHECK AIRBAG SYSTEM’’ on the
multi-info rmation display. Take your
vehicle to a dealer as soon as
possible(seepage ). 32
255Automatic transmission:
CONT INUED
Check T ransmission
Check A BS Syst emCheck A irbag Syst em
Multi-Inf ormation Display
Inst rument s and Cont rols
83

µµ
µ
µ
The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
You can insert or
remove the key only in this position.
To turn the key, you must push the
key in slightly. If your vehicle has an
automatic transmission, the shift
lever must also be in Park. If
the front wheels are turned, the
anti -theft lock may make it diffi cult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
You can
operate the audio system and the
accessory power sockets in this
position.
Use this position
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
This
is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
You will hear a reminder beeper if
you leave the key in the ignition switch
in the LOCK (0) or the
ACCESSORY (I) position and open
thedriver’sdoor.Removethekeyto
turn of f the beeper.
You will also see a ‘‘REMOVE KEY’’
message on the multi-inf ormation
display (see page ).
If your vehicle has an automatic
transmission, the shif t lever must be
in Park bef ore you can remove the
key f rom the ignition switch. 79
LOCK (0) A CCESSORY (I)
ST A RT (III) ON (II)
Ignition Switch
128
Removing the key from the
ignition switch while driving
locks the steering. This can
cause you to lose control of the
vehicle.
Remove the key from the
ignition switch only when
parked.

If desired, you can use the
adjustment switches to change the
seat position af ter it is in its
memorized position. If you change
the memorized position, the
indicator in the memory button will
go out. To keep this seat position f or
later use, you must store it in the
driver’s seat position memory.
Pressing any of the seat
adjustment switches.
Shif ting out of Park (A/T), or into
reverse (M/T).
Any of these actions will stop the
system’s automatic seat adjustment:
The system will move the driver’s
seat to the memorized position. The
indicator in the selected memory
button will f lash during movement.
When the adjustment is complete,
you will hear two beeps, and the
indicator will stay on. Pressing either memory button or
the MEMO button on the driver’s
door.
You cannot select a memorized
position if the transmission is in
reverse. Shif t to another gear,
then select a position.
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete.
Notes f or vehicles with M/T
Driving Position Memory System
144

This section gives you tips on
starting the engine under various
conditions, and how to operate the
manual and automatic transmissions.
It also includes important
information on parking your vehicle,
the braking system, the vehicle
stability assist (VSA) system, the tire
pressure monitoring system (TPMS),
and f acts you need if you are
planning to tow a trailer.........................
Preparing to Drive .242
.......................
Starting the Engine .243
...................
Manual Transmission . 244
..............
Automatic Transmission . 246
...........................................
Parking .253
.............................
Braking System .254
...............
Anti-lock Brakes (ABS) . 255
Tire Pressure Monitoring ........................
System (TPMS) .257
Vehicle Stability Assist (VSA) ........................................
System .262
...........................
Towing a Trailer .264
Driving
Driving
241

Apply the parking brake.
In cold weather, turn off all
electrical accessories to reduce
the drain on the battery. If
the engine fails to start, press
the accelerator pedal all the way
downandholdittherewhile
starting to clear flooding. Return
to step 5 if the engine does not
start.
Push the clutch pedal down all the
way.
Make sure the shift lever is in
Park. Press on the brake pedal. Without
touching the accelerator
pedal, turn the ignition key to the
START (III) position. Do not hold
the key in the START (III)
position for more than 15 seconds
at a time. If the engine does not
start right away, pause for at least
10 seconds before trying again.
If the engine does not start within
15 seconds, or starts but stalls
right away, repeat step 4 with the
accelerator pedal pressed halfway
down. If the engine starts, release
pressure on the accelerator pedal
so the engine does not race.
1.
2.
3.
4.
5.6.
Manual
transmission:
Automatic transmission:
127
Starting theEngine
Driv ing
243
The engine is harder to start in cold
weather. Also, the thinner air found at
altitudes above 8,000 feet (2,400
meters) adds to this problem.
T he immobilizer system protects your
vehicle f rom thef t. If an improperly-
coded key (or other device) is used, the
engine’s f uel system is disabled. For
more inf ormation, see page .

The ‘‘D’’ indicator comes on for a
few seconds when you turn the
ignition switch to the ON (II)
position. If it flashes while driving (in
any shift position), it indicates a
possible problem in the transmission. If
the malfunction indicator lamp
comes on along with the ‘‘D’’
indicato r, there is a problem with the
automatic transmission control
system. Avoid rapid acceleration, and
have the transmission checked by
your dealer as soon as possible.
These indicators in the tachometer
show which position the shift lever is
in. When
the ‘‘D’’ indicator warns of a
possible problem with the
transmission, you will see a ‘‘CHECK
TRANSMISSION’’ message on the
multi-inf ormation display (see page ). To shif t f rom any position, move the
shiftlever.Youcannotshiftoutof
Park when the ignition switch is in
the LOCK (0) or the ACCESSORY
(I) position.
83
Automatic Transmission
Shif t L ever Position Indicators
Shif ting
246
SHIFT LEVER