2007 Acura RDX reset

ÛÝÛÝ
With
the multi-information display
and the INFO ( / ) and SEL/
RESET buttons on the right side of
the steering wheel, you can
cu stomize some vehicle control
settings.
To enter the customizing mode,
press and hold the INFO ( / )
button for more than 3 seconds.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the tran smission in
Park. You
cannot customize the settings
under these conditions:
If you turn the ignition switch to
the ACCESSORY (I) or the LOCK
(0) position.
If you move the shift lever out of
Park. If
you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Refer to the table in the next page
about the settings you want to
customize.
The
first customizing menu is:
CHG SETTING
DEFAULT ALL If
you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button (see page ). 90
91
CONT INUED
Customized Settings
Multi-Inf ormation Display
Inst rument s and Cont rols
87
——
y
y
() yy

ÎÎÎ
Î Î
Î
Î Î
µ™¶™
µ™ ¶™
Î
Menu Item Setting Option Page
Group Setup Description
LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A & AVG. FUEL
RESET with REFUEL
ELAP. TIME RESET
CONDITION
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT AUT O OFF
TIMER
AUTO DOOR LOCK ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
3°C 0°C 3°C
ON
OFF
IGN RESET
TRIP A RESET
TRIP B RESET
15 sec
30 sec
60 sec
0sec
15 sec
30 sec
60 sec
SHIFT FROM P
WITH VEH SPEED
OFF 94
96
98
100
103
105
108
MET ER SET UP
(P.93)
LIGHTING SETUP
(P.102)
DOOR SETUP
(P.107) Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Resets the elapsed time of your current trip.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes when the doors automatically lock.
: Default setting
Multi-Inf ormation Display
88
——
y
y
() yy

ÛÝÛÝ
If you want to set the def ault settings,
press the INFO ( / ) button to
select DEFAULT ALL, then press
the SEL/RESET button. To enter the customizing mode,
press and hold the INFO ( / )
button for more than 3 seconds. When DEFAULT ALL is set, you will
see the above display for several
seconds, then the screen returns to
CUSTOMIZE ENTRY.
To set the def ault settings, select
DEFAULT ALL, and press the SEL/
RESET button. Then select SET, and
press the SEL/RESET button.
Multi-Inf ormation Display
DEFAUL T AL L
90
——
yy
() yy

Û
Ý
ÛÝ
CONT INUED
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:METER SETUP
LIGHTING SETUP
DOOR SETUP
While CHG SETTING in the
CUSTOMIZE ENTRY is shown in
the multi-information display, press
the SEL/RESET button. The screen
changes to METER SETUP in the
CUSTOMIZE GROUP.
Each time you press the INFO ( / ) button, the screen changes as
shownonthenextpage.Pressthe
INFO ( / ) button, until you see
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If DEFAULT ALL is not set, you will
see the above display for several
seconds, then the screen goes back
to CUSTOMIZE ENTRY. Repeat the
procedure to select DEFAULT ALL.
If you want to cancel DEFAULT
ALL, select EXIT, then press the
SEL/RESET button. The screen
goes back to CUSTOMIZE ENTRY.
Multi-Inf ormation Display
Change Settings
Inst rument s and Cont rols
91
——
y
y
() yy

ÛÝÛÝ
Multi-Information Display
92
: Press and hold theINFO ( / ) button
(3 seconds)
: Press the SEL/RESET button or the Select/
Reset knob
: Press the INFO ( / ) button or rotate the
Select/Reset knob Seepage93
Seepage102
Seepage107
——
y

y
() yy

Û
Ý
ÛÝ
ÛÝ
Here are the four custom settings
forthemetersetup:
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP A & AVG. FUEL RESET
with REFUEL
ELAP. TIME RESET
CONDITION
While METER SETUP is shown in
the CUSTOMIZE GROUP of the
multi-info rmation display, press the
SEL/RESET button.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
CONTINUED
Meter Setup
Multi-Information Display
Instru me ntsand Cont ro ls
93
: Press the SEL/
RESET button or
the Select/Reset
knob
: Press the INFO
( / ) button or
rotate Select/
Reset knob Seepage94
Seepage96
Seepage98
Seepage100
——
y

y
() yy

ÛÝ
There are three language selections
you can make: English, French, and
Spanish. To choose the language you
want, f ollow these instructions:
While METER SETUP is shown in
the CUSTOMIZE GROUP of the
multi-inf ormation display, press the
SEL/RESET button. You will see the
above display.Select the desired language by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Inf ormation Display
L anguage Select ion
94
——
y
y
() yy

ÛÝ
To exit LANGUAGE SELECTION
without changing the current setting,
select EXIT by pressing the INFO
( / ) button, then press the SEL/
RESET button. The screen goes
back to CUSTOMIZE MENU.
All messages in the multi-
inf ormation display will be shown in
the language you selected. When your choice is set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE MENU. If your choice is not set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE MENU. If this
happens, you need to repeat the
same procedure.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
95
——
y

y
() y
y