2007 Abarth Grande Punto engine

121
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
GENERAL WARNINGS ..................................................... 122
LOW BRAKE FLUID............................................................ 122
HANDBRAKE ON................................................................ 122
AIR BAG FAILURE ................................................................ 123
ENGINE COOLANT HIGH TEMPERATURE ................ 123
LOW ENGINE OIL PRESSURE.......................................... 124
SEAT BELTS NOT FASTENED .......................................... 124
EBD SYSTEM FAILURE ........................................................ 124
ENGINE CONTROL SYSTEM FAILURE (EOBD) ........ 125
FRONT PASSENGER AIR BAG DEACTIVATED.......... 126
ABS SYSTEM FAILURE......................................................... 126
FUEL RESERVE ....................................................................... 126
EXTERNAL LIGHTS FAILURE........................................... 127
REAR FOG LIGHTS.............................................................. 127
ESP SYSTEM FAILURE ........................................................ 127
SIDE LIGHTS AND LOW BEAMS.................................... 128
FOLLOW ME HOME ........................................................... 128
LEFT-HAND DIRECTION INDICATOR ........................ 128
RIGHT-HAND DIRECTION INDICATOR .................... 128
FRONT FOG LIGHTS.......................................................... 128ACTIVATION OF THE SPORT BOOST FUNCTION 128
MAIN BEAM HEADLIGHTS............................................... 128
CHECK TIRE PRESSARE .................................................... 129
INSUFFICIENT TYRE PRESSURE ..................................... 129
TIRE PRESSURE NOT SUITABLE FOR THE SPEED .... 129
POSSIBILITY OF ICE ON THE ROAD ........................... 130
LIMITED FUEL DISTANCE ................................................ 130
ASR SYSTEM.......................................................................... 130
SET SPEED LIMIT EXCEEDED .......................................... 130
INSUFFICIENT BATTERY CHARGE .............................. 131
INCOMPLETE CAR DOOR CLOSURE .......................... 131
VEHICLE PROTECTION SYSTEM -
FIAT CODE - FAILURE ...................................................... 131
BRAKE PAD WEAR ............................................................. 132
CRUISE CONTROL ............................................................ 132
GENERIC SIGNAL ............................................................... 132
W W
A A
R R
N N
I I
N N
G G

L L
I I
G G
H H
T T
S S

A A
N N
D D

M M
E E
S S
S S
A A
G G
E E
S S

123
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
AIR BAG FAILURE (red)
Turning the ignition key in the
MARposition the warning
light turns on, it has to turn off
after a few seconds.
If the warning light does not turn off this
indicates a failure in the air bag system.
The display visualizes the specific message.
¬
If the ¬warning light does
not turn on while turning the
ignition key in the MAR position or
if it stays lighted while the car is in
motion there may be a failure in the
restraint systems; in this case the air
bags or the pretensioners may be de-
activated in the event of a collision
or, in a limited number of cases, ac-
tivate incorrectly. Before going on re-
fer to the Abarth Dealership in order
to have the system immediately in-
spected.
WARNING
The ¬warning light failure
(light off ) is signalled by the
flashing for over the normal 4 seconds
of the light “that signals that the
passenger-side air bag is deactivated.
WARNING
ENGINE COOLANT
HIGH TEMPERATURE
(red)
Turning the ignition key in the
MARposition the warning light turns on,
it has to turn off after a few seconds.
The light turns on when the engine is
overheated.
If the light turns on the following steps
must be followed:
❒if in normal driving conditions:
stop the vehicle, turn off the engine
and check that the water level in the
reservoir is not under the MINmark.
In this case wait a few minutes in or-
der to let the engine cool down, then
open slowly and very carefully the tap,
fill up with the coolant, making sure
that the coolant level is between the
MINand MAXmarks on the reser-
voir. Besides visually check the pres-
ence of possible leaks of coolant. If the
light turns on again after starting up
the engine refer to the Abarth Deal-
ership.
ç
❒in case of demanding use of the
vehicle(for example during uphill
hauling of trailers or when the vehi-
cle is fully loaded): slow down and, if
the light stays on, halt the car. Stop for
2 or 3 minutes keeping the engine on
and slightly revved up in order to
favour the active circulation of the
coolant, after that turn off the engine.
Check the level of the coolant in the
reservoir as previously described.
IMPORTANT In case of very exacting
routes it is advisable before turning off the
engine to keep it on and slightly revved up
for a few minutes.
The display visualizes the specific message.

124
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
LOW ENGINE OIL
PRESSURE (red)
Turning the ignition key in the
MAR position the warning light turns on,
it has to turn off as soon as the engine is
started.
The display visualizes the specific message.
v
If the warning light vturns on (together with the
message on the display) while driving,
stop immediately and refer to the
Abarth Dealership.
WARNING
EBD SYSTEM
FAILURE (red)
(amber)
The simultaneous lighting of the
xand>lights when the car is moving indicates
a problem with the EBD system or that
the system itself is not available; in this
case under heavy braking you may have a
premature rear wheel lock-up with the
possibility of skidding. Driving very care-
fully immediately reach the closest Abarth
Dealership in order to have the system in-
spected.
The display visualizes the specific message.
x>
SEAT BELTS NOT
FASTENED (red)
The light on the dashboard turns
on and stays fixed when the vehicle is not
in motion and the driver-side seat belt is
not correctly fastened. The light will flash
together with an acoustic warning signal
(buzzer), when the car is in motion and the
front seat belts are not correctly fastened.
The buzzer of the S.B.R. system (Seat Belt
Reminder) can be deactivated by the
Abarth Dealership.
It is possible to reactivate the system by
means of the set up menu.
<

125
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
If while turning the ignition
key in the MAR position, the
Ulight dose not turn on or
if while driving it illuminates
or flashes (on some versions together
with the message on the display), re-
fer to the Abarth Dealership as soon as
possible. The functionality of the
Ulight can be checked with appropriate
equipment by traffic control agents.
Conform to the regulations in force in
the country in which you are circulat-
ing.
In this case you can continue to drive
though try to avoid either putting the en-
gine under stress or high speeds. The pro-
longed use of the vehicle with the warning
light on could cause damages. Reach as
soon as possible the Abarth Dealership.
The light turns off if the problem disap-
pears, but the system memorizes the re-
port.
❒flashing light:indicates the possibility of
damage to the catalyst (see “EOBD
System” in the “Instrument panel and
controls” chapter).
In case of flashing light one must release the
accelerator pedal, in order to reach low
speeds, until the light turns off, continue
at moderate speed trying to avoid driving
conditions that can cause further flashing
of the light. Reach the Abarth Dealership
as soon as possible. ENGINE CONTROL
SYSTEM FAILURE
(EOBD) (amber)
Under normal conditions,
turning the ignition key in the MARpo-
sition, the light turns on, but it should turn
off as soon as the engine is started. The ini-
tial illumination indicates the correct func-
tioning of the light.
If the light does not turn off or if it turns on
while driving:
❒fixed light (no flashing):this indicates
malfunctioning in the supply/ignition
system that could cause high emissions
from the exhaust pipe, possible loss
of performance, bad driveability and
high fuel consumption.
The display visualizes the specific message.
U

131
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
INSUFFICIENT
BATTERY CHARGE
(red)
The symbol is shown on the display to-
gether with the specific message if the bat-
tery is low on charge.
If the symbol remains on the display re-
fer to the Abarth Dealership as soon as
possible
w
INCOMPLETE CAR
DOOR CLOSURE (red)
The symbol is shown on the dis-
play together with the specific message if
one or more of the car doors or if the
hatchback are not perfectly closed.
If the vehicle is in motion and the doors
are open an acoustic warning signal can be
heard.
´
VEHICLE PROTECTION
SYSTEM – FIAT CODE -
FAILURE (amber)
The symbol is shown on the display to-
gether with the specific message when a
possible failure in the system is present (
see “The FIAT CODE system” in the “In-
strument panel and controls” chapter).
IMPORTANT The contemporary lighting
of the
Ulight and of the Ysymbol in-
dicates a problem in the FIAT CODE sys-
tem.
If the
Ysymbol appears while the engine
is running refer to the Abarth Dealership
in order to have all the keys memorized.
Y

132
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
BRAKE PAD WEAR
(amber yellow)
The symbol displays together
with a specific message if brake pads are
worn; if necessary, replace them as soon
as possible.
d
CRUISE CONTROL
(for versions/markets,
where provided) (green)
The symbol displays together
with a specific message rotating the Cruise
Control ring to ON.
Ü
GENERIC SIGNAL
(amber yellow)
The symbol displays together
with a specific message following these
events.
Specific messages display.
Engine oil pressure sensor fault
The symbol displays together with a spe-
cific message when an engine oil pressure
sensor fault is detected. Refer to the Abarth
dealership for repairs.
Fuel stop system activation
The symbol displays together with a spe-
cific message when the fuel stop system
activates.
è
Fault of tyre pressure monitoring
system (for versions/markets,
where provided)
The symbol displays together with a spe-
cific message when a fault of the tyre pres-
sure monitoring system T.P.M.S. (for ver-
sions/markets, where provided) is de-
tected.
As soon as possible, refer to the Abarth
dealership for repairs.
If one or more wheels provided with sen-
sors are fitted, a symbol displays until ini-
tial conditions are restored.

133
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
ENGINE STARTING ........................................................... 134
QUICK TYRE REPAIR KIT
FIX & GO automatic ........................................................... 135
WHEN NEEDING TO CHANGE A BULB ................... 139
IF AN EXTERIOR LIGHT BURNS OUT.......................... 141
IF AN INTERIOR LIGHT BURNS OUT.......................... 146
IF A FUSE BLOWS ................................................................ 148
IF THE BATTERY IS FLAT .................................................. 157
JACKING THE CAR ............................................................. 158
TOWING THE CAR ........................................................... 159
I I
N N

A A
N N

E E
M M
E E
R R
G G
E E
N N
C C
Y Y
In an emergency we recommend that you call the toll-free number found on the
Warranty Booklet. You can also connect to the site www.fiat.com
to search for the nearest Abarth Dealership point.

134
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
ENGINE
STARTING
EMERGENCY START-UP
If the
Ysign keeps being displayed, im-
mediately call the Abarth Dealership.
JUMP STARTING fig. 1
If the battery is flat, it is possible to start
the engine using an auxiliary battery with
the same capacity or a little higher than
the flat one. Proceed as follows:
❒connect positive terminals (+near the
terminal) of the two batteries with a
jump lead;
❒with a second lead, connect the nega-
tive terminal (–) of the auxiliary battery
to an earthing point
Eon the engine or
the gearbox of the car to be started;
❒ start the engine;
❒when the engine has been started, re-
move the leads reversing the order
above.
If after a few attempts the engine does not
start, do not insist but contact the near-
est Abarth Dealership.
IMPORTANT Do not directly connect the
negative terminals of the two batteries:
sparks could ignite the flammable gas from
the battery. If the other battery is fitted in
another car, prevent accidental contacts
between the metal parts of the two cars.BUMP STARTING
Never bump start the engine (by pushing,
towing, or coasting downhill) as this could
cause fuel to flow into the catalytic ex-
haust system and damage it beyond repair.
IMPORTANT Remember that the brake
booster and the power steering system
are not operating until the engine is start-
ed, a greater effort will therefore be re-
quired to press the brake pedal or turn
the steering wheel.
The starting procedure must
be carried out by qualified
personnel because incorrect opera-
tions may cause electrical discharge of
considerable intensity. The liquid con-
tained in the battery is poisonous and
corrosive. Avoid contact with the skin
and eyes. Keep naked flames and light-
ed cigarettes away from the battery
and do not cause sparks.
WARNING
fig. 1F0M104Ab