2007.5 PEUGEOT 4007 spare wheel
[x] Cancel search: spare wheelPage 3 of 221
i
FAMILIARISATION
6
Opening
After unlocking the vehicle using the
r e m o t e c o n t r o l o r t h e k e y , p r e s s t h e
handle A and raise the tailgate.
Tailgate Lower tailgate
Opening
Push the handle C to the right and
tilt the tailgate D gently.
T h e m a x i m u m a u t h o r i s e d w e i g h t
o n t h e l o w e r t a i l g a t e w h e n o p e n
is 200 kg . Spare wheel and tools
Access to the spare wheel
R e m o v e t h e p l a s t i c c o v e r E to gain
a c c e s s t o t h e s p a r e w h e e l fi x i n g
system.
80
OPENING
80 122
Closing
Pull the handle B d o w n w a r d s . Closing
Raise the tailgate D , p u s h i t t o c l o s e
it, then check that it is secured
correctly. Access to the tools
T h e t o o l s a r e s t o r e d i n t h e s t o r a g e c o m -
p a r t m e n t
F i n t h e b o o t r i g h t - h a n d t r i m .
Page 133 of 221
9
i
PRACTICAL INFORMATION
CHANGING CHANGING A WHEEL
Operating procedure for replacing a
faulty wheel with the spare wheel using
the tools provided with the vehicle.
The tools are stored in the storage com-
partment in the boot right-hand trim.
To gain access to them:
open the boot,
turn button A to the left,
remove the cover B ,
r e m o v e t h e fi x i n g b a n d C and take
out the tool bag D containing the
tools,
grip the jack E in your hand and re-
m o v e i t f r o m i t s fi x i n g p o s i t i o n .
1. Wheelbrace.
Used to remove the wheel trim and t h e w h e e l fi x i n g b o l t s .
2. Jack.
Used to raise the vehicle.
3. Handle.
U s e d t o e x t e n d t h e j a c k .
List of tools
Other accessories
4. Removable towing eye.
Refer to the "Towing" paragraph.
Access to the tools
Wheel with trim
When changing a wheel, ensure
that the four wheels are of identi-
c a l s p e c i fi c a t i o n a n d b r a n d .
When removing the wheel , remove
t h e t r i m fi r s t u s i n g t h e h a n d l e 3 , pulling
at the notch.
W h e n r e fi t t i n g t h e w h e e l , r e fi t t h e t r i m
starting by placing its notch F (indicated
on the back of the trim) opposite the
valve G and press on its periphery with
the palm of your hand.
When storing, take care to se-
cure the tool bag D fi r m l y u s i n g
t h e fi x i n g b a n d C .
Page 134 of 221
9
i
PRACTICAL INFORMATION
Fixing the "space-saving"
spare wheel
I f y o u r v e h i c l e i s fi t t e d w i t h a l l o y
wheels, it is normal to notice that
the washers do not come into
contact with the "space-saving"
spare wheel when tightening the
b o l t s o n fi t t i n g . T h e w h e e l i s r e -
tained by the conical contact of
each bolt.
Access to the "space-saving"
spare wheel
The "space-saving" spare wheel is in-
stalled on the outside, under the boot,
supported by a metal carrier.
To gain access to the tools, refer to the
"Access to the tools" paragraph. Putting the wheel back in place
Put the wheel back in place in its
carrier.
Lift the carrier C and reposition the
hook D .
Open the lower tailgate (refer to the
"Access" section).
Remove the plastic cover A using
the handle 3 .
Unscrew the spare wheel carrier re-
taining bolt B using the wheelbrace 1 .
Close the lower tailgate (refer to the
"Access" section).
Lift the carrier C to detach the hook
D then allow it to lower.
Tighten the spare wheel carrier re-
taining bolt B fully using the wheel-
brace 1 .
R e fi t t h e p l a s t i c c o v e r A , close the
lower tailgate and store the tools.
Removing the wheel
Open the tailgate and the lower tail-
gate (refer to the "Access" section).
Take out the handle 3 (refer to the
"Access to the tools" paragraph).
Page 135 of 221
9
i
PRACTICAL INFORMATION
Parking the vehicle
Immobilise the vehicle where it
d o e s n o t b l o c k t r a f fi c : i f p o s s i b l e ,
park the vehicle on level, stable
and non-slippery ground.
Apply the handbrake, switch
o f f t h e i g n i t i o n a n d e n g a g e fi r s t
gear to lock the wheels.
If necessary, place a chock un-
der the wheel diagonally oppo-
site the wheel to be changed.
Never go underneath a vehicle
raisedusing a jack; use a stand.
Removing the wheel
List of operations
Fit the anti-theft socket 5 on the
wheelbrace 1 to unlock the anti-theft
bolt.
Unlock the other bolts using the
wheelbrace 1 only.
Place the jack 2 in contact with one
of the two front A or rear B locations
provided on the underframe, which-
ever is closest to the wheel to be
changed.
E x t e n d t h e j a c k 2 until its base plate
is in contact with the ground. Ensure
that the centreline of the jack base
plate is directly below the location A
or B used.
R a i s e t h e v e h i c l e u n t i l t h e r e i s s u f fi -
cient space between the wheel and
the ground to admit the spare (not
punctured) wheel easily.
Remove the bolts and store them in
a clean place.
Remove the wheel.
Page 136 of 221
9
i
i
PRACTICAL INFORMATION
After changing a wheel
When using the "space-saving"
s p a r e w h e e l , d o n o t e x c e e d a
speed of 50 mph (80 km/h).
Have the tightening of the bolts
and the pressure of the spare
wheel checked by a PEUGEOT
dealer without delay.
Have the punctured wheel re-
paired and replace it on the vehicle
as soon as possible.
Fitting the wheel
List of operations
Lower the vehicle fully.
Fold the jack 2 and detach it.
Lock the anti-theft bolt using the
wheelbrace 1 fi t t e d w i t h t h e a n t i -
theft socket 5 .
Lock the other bolts using the wheel-
brace 1 only.
Store the tools (refer to the para-
graph "Access to the tools").
Fitting snow tyres
If you equip your vehicle with
s n o w t y r e s fi t t e d o n s t e e l w h e e l
rims, it is imperative that spe-
cial bolts available from your
PEUGEOT dealer are used.
Put the wheel in place on the hub.
Screw in the bolts by hand to the
stop.
Pre-tighten the anti-theft bolt using
the wheelbrace 1 fi t t e d w i t h t h e a n t i -
theft socket 5 .
Pre-tighten the other bolts using the
wheelbrace 1 only.
Page 155 of 221
9i
i
PRACTICAL INFORMATION
T h e fi t t i n g o f e l e c t r i c a l e q u i p m e n t
or accessories which are not re-
commended by PEUGEOT may
result in a failure of your vehicle’s
electronic system.
P l e a s e n o t e t h i s s p e c i fi c w a r n -
ing. You are advised to contact
a representative of the Marque
to be shown the range of recom-
mended equipment and acces-
sories.
ACCESSORIES ACCESSORIES
You can obtain a wide range of accesso-
ries and original parts from the PEUGEOT
network.
These accessories and parts have
been tested and approved for reliability
and safety.
They are all adapted to your vehicle
a n d b e n e fi t f r o m P E U G E O T ’ s r e c o m -
mendation and warranty.
The product range offered by
PEUGEOT Accessories is structured
around 5 categories: PROTECTION -
TOURING - IN-CAR TECHNOLOGY -
STYLING - UNIVERSAL.
"Protection": "Touring":
"In-car technology":
"Styling":
"Universal":
* To prevent any risk of jamming of the pedals:
- ensure that the mat is positioned and secured correctly,
- n e v e r fi t o n e m a t o n t o p o f a n - other. Depending on the country in which
the vehicle is sold, it is compulso-
ry to have a safety jacket, warning
triangle and spare bulbs available
in the vehicle.
anti-theft alarm, window en-
g r a v i n g , w h e e l l o c k s , fi r s t a i d
kit, warning triangle, safety
jacket, stolen vehicle track-
ing system, anti-skid enve-
l o p e s , t y r e u n d e r - i n fl a t i o n
detection. mats * , boot tray, luggage net,
d o g g u a r d , fi x e d c o a t h o o k o n
head restraint, PVC door sills,
c o o l b o x .
For leisure pursuits: roof bars,
bicycle carrier on roof bars,
s k i c a r r i e r , r o o f b o x , b o o s t e r
seats and child seats, side
blinds and rear blind.
T r a i l e r t o w b a r w h i c h m u s t b e fi t t e d b y
the PEUGEOT network.
audio systems, audio-tele-
p h o n e , a m p l i fi e r s , s a t e l l i t e
navigation systems, hands-
free kit, speakers, DVD play-
er, connection kit for MP3
player or portable CD player,
rear parking assistance. d o o r d e fl e c t o r s , r e a r s t y l i n g
strips, 18 inch alloy wheels,
c h r o m e d e x t e r i o r m i r r o r s h e l l s ,
chromed door handle shells,
diffuser on rear bumper, side
protection mouldings, alumin-
ium boot sill.
s c r e e n w a s h , i n t e r i o r a n d e x -
terior maintenance and clean-
ing products.
It is advisable to contact a PEUGEOT
dealer before installing accessory ra-
diocommunication transmitters with
a n e x t e r n a l a e r i a l o n y o u r v e h i c l e .
The PEUGEOT network will provide
t h e s p e c i fi c a t i o n s ( f r e q u e n c y b a n d ,
m a x i m u m o u t p u t p o w e r , a e r i a l p o s i -
tion, special installation conditions) of
t h e t r a n s m i t t e r s w h i c h c a n b e fi t t e d ,
in accordance with the Motor Vehicle
Electromagnetic Compa-tibility Direc-
tive (2004/104/EC).
Page 160 of 221
10
i
TECHNICAL DATA
A. Manufacturer's plate.
This number is indicated on a plate riveted on the centre pillar, on the
driver's side.
B. Serial number under the bonnet.
This number is engraved on the bodywork near the windscreen.
C. After Sales plate.
This plate is riveted on the inside of the bonnet.
D. Front number plate.
E. Tyres/paint label.
T h i s l a b e l i s a f fi x e d t o t h e p a s s e n g e r ' s door centre pillar.
It indicates the following information:
- the tyres pressures without load and with load,
- the rim and tyre sizes,
- the pressure of the spare wheel,
- the paint colour reference. The tyre pressures must be
checked when cold at least once
a month.
IDENTIFICATION FEATURES IDENTIFICA
Low tyre pressures increase fuel
consumption.
F.
Serial number behind the windscreen.
This number is engraved on the fascia, behind the windscreen.