2007.5 Peugeot 307 SW Dag ECU

COMFORT
Fold the corresponding seat.
Tilt the two red levers E under the
seat to release the front feet.
Lift it and carry it using the carrying
handle F .
In the 3rd row, position the i xing point
closers to obtain a l at boot l oor. Refitting a seat
In the 3rd row, i rst remove the l oor
i xing point closers using a thin
screwdriver.
Before positioning the 3rd row seats,
move those of the 2nd row forward if
necessary.

Check that nothing is obstructing
the l oor i xing points thus pre-
venting correct locking of the seat
feet.
Carry the seat using the carrying
handle F .
Position the front feet in the securing
points and lock them by means of the
two red levers E .
Locked
Pull the strap C upwards to check
that the rear feet are free.
Tilt the folded seat backwards. The rear feet lock automatically.

Check that the seat is locked cor-
rectly.
Lift the seat back, i rst releasing it by
pulling the strap B .
To lock the additional seats, press
the two levers D .
Only lock the seat back on
the cushion occasionally, to
avoid undue wear of the seat
covers.
Avoid placing luggage on folded
seats.
Never use the adjusting straps to re-
move, rei t or carry a seat, use the
carrying handle provided for this pur-
pose.
Free
Removing a seat

COMFORT
61
LOCATION OF CHILD SEATS SECURED USING THE SEAT BELT
In accordance with the European regulation (Directive 2000/3), this table indicates the options for the installation of child seats
secured using the seat belt and universally approved (a) dependi ng on the weight of the child and the seat in the vehicle.
(a) Universal child seat: child seat which can be installed in all
vehicles using the seat belt.
(b) Group 0: from birth to 10 kg.
(c) Consult the current legislation in your country before installing
your child on this seat.
U: seat suitable for the installation of
a child seat secured using the seat
belt and universally approved, "rear
facing" and/or "forwards facing".
U (R): identical to U , the vehicle seat
must be adjusted to the highest posi-
tion.

L-: only the child seats indicated can
be installed on the seat concerned
(according to country).

Seat
Weight of the child /indicative age

Below 13 kg
(groups 0 (b) and 0+)

Up to 1 year approx

9 to 18 kg
(group 1)

1 to 3 years approx

15 to 25 kg
(group 2)

3 to 6 years approx

22 to 36 kg
(group 3)

6 to 10 years approx

1st
row Front passenger
seat (c)
- i xed
-
height adjustable
(R)

U

U (R)
U

U (R)
U

U (R)
U

U (R)

2nd
row Side
Seat off centre and
recentred

U U U U
Centre
Centre seat
U U U U

3rd
row Side
Additional seat
L1 L2 L2, L3, L4 L2, L3, L4
Side
2nd row side seat
U U U U
Side
2nd row centre seat
U U U U

84
LAYOUT
BOOT LAYOUT
4. Rear armrests with grab handle
5. Storage nets
One of them contains the luggage
retaining net.
6. Luggage retaining net fastenings ("hammock"
version) in the tailgate
Fold the net in two.
Secure the two centre hooks in the
stowing rings on the l oor.
Secure the net's remaining four
hooks on the boot pillars.
7. Load space cover
To install it:
- position one end of the cover roller in the 2 nd row,
- compress the opposite end of the roller and position it,
- release it to allow it to engage,
- unroll the cover as far as the boot pillars,
- insert the cover guides in the rails in the pillars, To remove it:
- remove the cover guides from
the pillar rails,
- return the cover into its roller,
- compress it and remove it from its support at the 2 nd row,
To store it, pull it back and place it
with the two storage nets, already
lowered.

Note: the roller has two hooks for
securing the luggage retaining net
depending on where it is installed.
8. High load retaining net
9. Luggage retaining net
Secure the net's seven hooks in the
stowing rings and the fastenings on
the l oor.
See coni guration of the nets (next
page).
1. Grab handles and
coat hooks
2. High load retaining net fastenings
The high load retaining net can be
i tted in the 2 nd or 3 rd row.
Open the covers of the corresponding
upper fastenings.
Fit the ends of the metal bar in these
fastenings.
Secure the two opaque material
strap hooks in the stowing rings on
the l oor.
The rings are located directly below
the corresponding upper fastenings.
Pull the two straps taut.
Secure the two hooks on the elastic
parts of the opaque material in these
rings.

Note: the net must be positioned so
that the label can be seen from the
boot. This ensures that the central
seat belt is routed correctly.
3.12 volt socket (100 W max)
This is a 12 volt socket (lighter type),
installed on the load space cover left
support.
It is supplied from the "Running" po-
sition.

96
SAFETY For the air bags to be fully
effective, observe the
following safety rules:
Sit in a normal upright posi-
tion.
Wear a correctly adjusted seat belt.
Do not leave anything between the
occupants and the air bags (a child,
pet, object...).
This could hamper the operation of
the air bags or injure the occupants.
After an accident or if the vehicle has
been stolen or broken into, have the
air bag systems checked.
All work on the air bag system is
strictly forbidden unless it is carried
out by qualii ed personnel of the
PEUGEOT network. Front air bags
Do not drive holding the steering
wheel by its spokes or resting your
hands on the centre part of the
wheel.
Passengers must not place their feet
on the fascia.
Smoke as little as possible as de-
ployment of the air bags can cause
burns or the risk of injury from a ciga-
rette or pipe.
Never remove or pierce the steering
wheel or hit it violently.
Curtain air bags *
Do not i x or glue anything to the roof.
This could cause injury to the head
when the curtain air bag inl ates.
Do not remove the grab handles in-
stalled on the roof, they play a part in
securing the curtain air bags.
Side air bags *
Only put suitable covers on the seats.
Contact a PEUGEOT dealer.
Do not i x or glue anything to the seat
backs. This could cause injury to the
chest or arms when the side air bag
inl ates.
Do not sit with the upper part of the
body any nearer to the door than
necessary.

96
SAFETY For the air bags to be fully
effective, observe the
following safety rules:
Sit in a normal upright posi-
tion.
Wear a correctly adjusted seat belt.
Do not leave anything between the
occupants and the air bags (a child,
pet, object...).
This could hamper the operation of
the air bags or injure the occupants.
After an accident or if the vehicle has
been stolen or broken into, have the
air bag systems checked.
All work on the air bag system is
strictly forbidden unless it is carried
out by qualii ed personnel of the
PEUGEOT network. Front air bags
Do not drive holding the steering
wheel by its spokes or resting your
hands on the centre part of the
wheel.
Passengers must not place their feet
on the fascia.
Smoke as little as possible as de-
ployment of the air bags can cause
burns or the risk of injury from a ciga-
rette or pipe.
Never remove or pierce the steering
wheel or hit it violently.
Curtain air bags *
Do not i x or glue anything to the roof.
This could cause injury to the head
when the curtain air bag inl ates.
Do not remove the grab handles in-
stalled on the roof, they play a part in
securing the curtain air bags.
Side air bags *
Only put suitable covers on the seats.
Contact a PEUGEOT dealer.
Do not i x or glue anything to the seat
backs. This could cause injury to the
chest or arms when the side air bag
inl ates.
Do not sit with the upper part of the
body any nearer to the door than
necessary.

108
CHECKS
Tilt the handle on the left-hand side
under the fascia to the right.
Lift the catch and raise the bonnet. Bonnet strut
RUNNING OUT OF FUEL
(DIESEL)
If you should run out of fuel, it is ne-
cessary to re-prime the circuit.
The repriming pump, the degas screw
and the transparent pipe are located
under the bonnet (see corresponding
drawing):
1.6 litre HDI 16V engine
- i ll the fuel tank with at least i ve
litres of diesel,
- unclip the style cover to access the repriming pump,
- squeeze and release the manual repriming pump until fuel appears
in the transparent pipe with the
green connector,
- operate the starter until the en- gine starts.
2 litre HDI 16V engine
- i ll the fuel tank with at least i ve litres of diesel,
- unclip the style cover to access the repriming pump,
- unscrew the degas screw,
- squeeze and release the ma- nual repriming pump until diesel
is seen escaping via the degas
screw,
- retighten the degas screw,
- operate the starter until the en- gine starts.
OPENING THE BONNET
From outside Secure the strut
to hold the bonnet
open.
Before closing the
bonnet, replace the
strut in its housing.
To close
Lower the bonnet and release it at
the end of its travel.
Check that the bonnet is properly locked.
From inside

10
117
PRACTICAL INFORMATION
Fitting a wheel

 Position the wheel using the cen-
tralising tool 5 to assist you.

 Tighten the bolts by hand and re-
move the centralising tool 5 .

 Partly tighten the bolts using the
wheelbrace 1 .

 Fold the jack 4 and remove it.

 Fully tighten the bolts using the
wheelbrace 1 .

 Replace the wheel trim, starting
by placing the wheel trim notch
opposite the valve, and press it
on using the palm of the hand.

 Put the corresponding tools in the
holder and secure its cover.

 Place the holder on the ground
and align the spare wheel on it.

 Pass the notched hook into the
holder cover.

 Rei t the wheel under the vehicle
tightening the winch control nut
using the wheelbrace 1 .

 Fully tighten and check that
the wheel is horizontally l ush
against the rear l oor .

 Close the l ap using the lug to
lock the winch.

 Store the rest of the tools in the
right-hand trim of the boot. For your safety, always
change the wheel:
- on level, stable, non-slippery ground,
- with the handbrake on and the ig- nition switched off,
- with i rst or reverse gear engaged (position P for the automatic gear-
box),
- with the vehicle chocked.

Never go underneath a vehicle that
is supported only by a jack (use a
ramp).

Never rei t the holder under the
vehicle without the spare wheel.

Do not use a screwdriver in place
of the wheelbrace to unwind or
wind the winch. Recommendations when using
the temporary spare wheel *
Your vehicle may be equipped with a
spare wheel which has a different rim
to the standard wheel.
After use, have it replaced as quickly
as possible.
Observe the following instructions in
order to avoid altering the behaviour
of the vehicle:
- do not exceed
50 mph (80 km/h) ,
- do not i t a wheel trim,
- drive with care,
- check the tyre pressure indicated on the label.
* According to model and country.
After changing the wheel:
- have the correct positioning of the
punctured wheel, the tightening
of the bolts and the tyre pressure
checked by a PEUGEOT dealer
as soon as possible,
- have the punctured tyre repaired and rei t it to the vehicle as soon
as possible,
- have the correct positioning of the spare wheel checked by a
PEUGEOT dealer.
Wheels i tted with the Tyre Under-
Inl ation Detection system
For further information refer to "Tyre
under-inl ation detection" in the safe-
ty section.

10
119
PRACTICAL INFORMATION
1. Dipped beam headlamps (H1-55 W or xenon bulb).

WARNING: RISK OF ELECTROCU-
TION
Xenon bulbs must be changed by a
PEUGEOT dealer.
2. Main beam headlamps (H7-55 W).

 Remove the protective cover cor-
responding to the faulty bulb.

 Disconnect the connector.

 Press the end of each securing
clip. Change the bulb.
When i tting the new bulb, ensure
that the direction notches are po-
sitioned correctly and the securing
clips are i xed properly.
 Reconnect the connector.

 Rei t the protective cover.
Front lights
In the engine compartment, on the
right-hand side, remove the style
trim * :
- press the centre of each plastic stud A ,
- remove each plastic stud,
- remove the style trim.
When you have i nished, do not for-
get to put everything back in place
correctly:
- position the style trim * ,
- rei t each plastic stud A by press-
ing on it. Handle the bulbs with a dry
cloth.
The headlamps are i tted
with polycarbonate glass
with a protective coating. Do not
clean them with a dry or abrasive
cloth, nor with a detergent or sol-
vent product.
Use a sponge and soapy water.
CHANGING A BULB
* According to engine.