2007.5 Peugeot 307 light
[x] Cancel search: lightPage 138 of 212
10PRACTICAL INFORMATION
124
Front lights
In the engine compartment, on the
right-hand side, remove the style
trim * :
- press the centre of each plastic stud A ,
- remove each plastic stud,
- remove the style trim.
W h e n y o u h a v e i n i s h e d , d o n o t
forget to put everything back in place
correctly:
- position the style trim * ,
- r e i t e a c h p l a s t i c s t u d A by
pressing on it. Handle the bulbs with a dry
cloth.
T h e h e a d l a m p s a r e i t t e d
with polycarbonate glass with
a protective coating. D o n o t c l e a n
t h e m w i t h a d r y o r a b r a s i v e c l o t h ,
n o r w i t h a d e t e r g e n t o r s o l v e n t
p r o d u c t .
Use a sponge and soapy water.
1 . D i p p e d b e a m h e a d l a m p s
( H 1 - 5 5 W o r x e n o n b u l b ) .
W A R N I N G : R I S K O F E L E C T R O -
C U T I O N
Xenon bulbs must be changed by a
PEUGEOT dealer.
2. M a i n b e a m h e a d l a m p s ( H 7 - 5 5 W ) .
Remove the protective cover
corresponding to the faulty bulb.
Disconnect the connector.
Press the end of each securing
clip. Change the bulb.
W h e n i t t i n g t h e n e w b u l b , e n s u r e that the direction notches are
positioned correctly and the
s e c u r i n g c l i p s a r e i x e d p r o p e r l y .
Reconnect the connector.
R e i t t h e p r o t e c t i v e c o v e r .
C H A N G I N G A B U L B
* According to engine.
Page 139 of 212
10PRACTICAL INFORMATION
125
I n t e g r a t e d d i r e c t i o n i n d i c a t o r s i d e
repeaters.
Push the repeater forwards and
release it.
Remove the repeater and change
it.
These can be obtained from a
PEUGEOT dealer.
Amber coloured bulbs, such
as the direction indicators,
must be replaced with bulbs
o f i d e n t i c a l s p e c i i c a t i o n a n d
colour.
3 . S i d e l i g h t s ( W 5 W ) .
Remove the protective cover
corresponding to the faulty bulb.
Disconnect the connector.
Remove the bulb and change it.
4 . D i r e c t i o n i n d i c a t o r s (PY 21 W amber).
Turn the bulb holder a quarter of
a turn and remove it.
Change the bulb.
Note
: in certain climatic conditions
(low temperature, humidity), c o n d e n -
s a t i o n i n s i d e t h e h e a d l a m p g l a s s i s
normal ; it disappears a few minutes
after the lights are switched on.
5 . F o g l a m p s ( H 1 1 - 5 5 W ) .
Contact a PEUGEOT dealer to have
these bulbs changed.
Page 140 of 212
10PRACTICAL INFORMATION
126
1. D i r e c t i o n i n d i c a t o r s ( P 2 1 W ) .
2. R e v e r s i n g l i g h t s ( P 2 1 W ) ,
l e f t - h a n d s i d e .
F o g l a m p ( P 2 1 W ) , r i g h t - h a n d
s i d e .
3. Brake lights (P 21 W).
4. S i d e l i g h t s ( x 2 ) ( R 5 W ) .
Using a 10 mm box spanner,
u n s c r e w t h e 2 i x i n g n u t s 1 .
Release the lamp unit by pushing
it outwards.
Squeeze the two tabs 2 to release
the bulb holder.
Change the faulty bulb.
W h e n r e i t t i n g , e n s u r e t h a t t h e
lamp unit seal has been put back
in place correctly.
These 6 bulbs are changed from
inside the boot:
Move aside the boot trim to
access the bulb holder,
Press the two tabs and remove
the bulb holder,
Change the faulty bulb.
W h e n r e i t t i n g , t a k e c a r e t o p a s s t h e
trim under the seal.
Rear lights (saloon) T h i r d b r a k e l i g h t ( s a l o o n )
(4 W 5 W bulbs)
Page 141 of 212
10PRACTICAL INFORMATION
127
Remove the tailgate upper trim
carefully by unclipping it on either
side, perpendicular to its direction
of engagement.
Insert a screwdriver into the two
outer holes B to press on the two
tabs C .
Push the light unit outwards while
maintaining the pressure on the
tabs.
Pull the light unit outwards while
tilting it.
Change the faulty bulb.
W h e n r e i t t i n g , e n s u r e t h a t t h e
light unit tabs are engaged
correctly and that the tailgate
upper trim has been put back in
place correctly.
1. Brake lights (P 21 W).
2. S i d e l i g h t s ( x 2 ) ( R 5 W ) .
3. D i r e c t i o n i n d i c a t o r s ( P 2 1 W ) .
4. R e v e r s i n g l i g h t ( P 2 1 W ) ,
l e f t - h a n d s i d e .
F o g l a m p ( P 2 1 W ) , r i g h t - h a n d
s i d e .
These 6 bulbs are changed by
removing the light:
Remove the corresponding boot
side trim to access the light,
R e m o v e t h e l i g h t i x i n g n u t i n s i d e
the boot,
R e m o v e t h e l i g h t i x i n g n u t o u t -
side the boot,
Remove the light,
Unclip the harness,
Remove the bulb holder pressing
on the tabs A ,
Change the faulty bulb.
Note: if necessary, use the wheel-
brace to remove the nuts.
W h e n r e i t t i n g , t a k e c a r e t o p o s i t i o n
the bulb holder and the light
correctly.
Number plate lights
(W 5 W)
Insert a thin screwdriver into one
of the external holes of the lens.
Push it outwards to unclip it.
Remove the lens.
Change the faulty bulb.
Rear lights (estate) T h i r d b r a k e l i g h t ( e s t a t e )
(4 W 5 W bulbs)
Page 144 of 212
10PRACTICAL INFORMATION
129
Fuse N° Rating
Functions
F6 30 A Rear electric windows.
F7 5 A Front and rear courtesy lights, map reading lights, glove bo x lighting.
F8 20 A Audio equipment, audio/telephone, multifunction display
, alarm siren, alarm unit, trailer fuse
box, driving school module, steering wheel controls supply.
F9 30 A 12 V front socket, 12 V rear socket.
F10 15 A A u t o m a t i c g e a r b o x c o n t r o l u n i t , t y r e u n d e r - i n l a t i o n c o n t r o l u n i t , S T O P s w i t c h .
F11 15 A D i a g n o s t i c s o c k e t , p a r t i c l e e m i s s i o n i l t e r u n i t , l o w c u r r e n t i g n i t i o n s w i t c h .
F12 15 A Driving school module, rear parking assistance.
F13 5 A Engine fuse box, rain and brightness sensor.
F14 15 A Trailer fuse box, instrument panel, air bags and pre-tensioners
unit, automatic air conditioning,
hands-free kit.
F15 30 A Locking and deadlocking.
F16 - PARC shunt.
F17 40 A Heated rear screen.
Page 149 of 212
10PRACTICAL INFORMATION
134
E C O N O M Y M O D E F U N C T I O N
After the engine has stopped, certain
functions (windscreen wiper, electric
windows, sunroof, courtesy lights,
audio equipment, telephone, dipped
headlamps, etc.) can only be used for
a combined duration of approximately
thirty minutes, to prevent discharging
the battery.
Once the thirty minutes are over, a
switching to economy mode message
appears on the multi-function display
and the active functions are put on
standby.
These functions are reactivated
automatically next time the vehicle is
driven.
In order to resume the use of these
functions immediately, the engine
must be started and left to run for a
few minutes.
The time available to you will then
be double the duration for which the
engine is left running. However, this
p e r i o d w i l l a l w a y s b e b e t w e e n i v e
and thirty minutes. A l a t b a t t e r y p r e v e n t s t h e
engine from starting.
L O A D R E D U C T I O N
F U N C T I O N
When driving, certain functions (air
conditioning, heated rear screen,
heating system for passenger
compartment of diesel vehicles, etc.)
may be switched off temporarily,
depending on the level of battery
charge.
Reactivation of these functions is
automatic, once the battery charge is
s u f i c i e n t .
Note: at the risk of discharging the
battery, the functions that have been
switched off may be reactivated
manually.
Note: if the telephone is
being used when economy
mode starts, it will still be
p o s s i b l e t o i n i s h t h e c a l l .
Page 151 of 212
10PRACTICAL INFORMATION
136
D r i v i n g a d v i c e
D i s t r i b u t i o n o f l o a d s :
Distribute the load in the trailer so
that the heaviest items are as close
as possible to the axle and the nose
weight approaches the maximum
permitted without exceeding it.
Cooling:
towing a trailer on a slope increases
the temperature of the coolant.
As the fan is electrically controlled,
its cooling capacity is not dependent
on the engine speed.
To lower the engine speed, reduce
your speed.
The maximum towing load on a long
slope depends on the gradient and
the outside temperature.
In all cases, pay attention to the
coolant temperature.
If the warning light comes on, stop
the vehicle and switch off the engine
as soon as possible. T y r e s :
check the tyre pressures of the towing
vehicle and of the trailer, observing
the recommended pressures.
Braking:
towing increases the
braking distance.
Lights: check the electrical
signalling on the trailer.
S i d e w i n d : take into account the
increased sensitivity to side wind.
T O W I N G A T R A I L E R , A
C A R A V A N , A B O A T , E T C . . .
Your vehicle is primarily designed
for transporting people and luggage
but it may also be used for towing a
trailer.
We recommend the use of original
PEUGEOT towbars and their
harnesses that have been tested and
approved from the design stage of
y o u r v e h i c l e a n d t h a t t h e i t t i n g o f t h e
towbar is entrusted to a PEUGEOT
dealer.
I f t h e t o w b a r i s n o t i t t e d b y a
PEUGEOT dealer, it is imperative
t h a t i t i s i t t e d u s i n g t h e e l e c t r i c a l
pre-equipment located at the rear of
the vehicle in accordance with the
manufacturer’s instructions.
Driving with a trailer subjects the
t o w i n g v e h i c l e t o m o r e s i g n i i c a n t
stress and its driver must be
particularly careful.
Air density decreases with altitude,
thus reducing engine performance.
Above 1 000 metres, the maximum
towing load must be reduced by 10 %
and so on for every 1 000 metres of
altitude.
The rear parking assistance function
will be disarmed automatically when
a t o w b a r i s i t t e d .
Page 162 of 212
11TECHNICAL DATA
147
SALOON WEIGHTS AND TOWING LOADS (in kg)
* The weight of the braked trailer can be increased, within the GTW, if the GVW of the towing vehicle is reduced b y an equal amount; warning, towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
Petrol engines
2 litre 16V 143 bhp
Gearbox
Manual Auto.
Model codes:
3C… 3A…
RFJC RFJF