2007.5 Peugeot 307 instrument panel
[x] Cancel search: instrument panelPage 114 of 212
DRIVING
This speed limiter, of the new
generation, has a display on the
instrument panel to indicate the
programmed speed.
It prevents exceeding of the vehicle
speed programmed by the driver.
When the programmed speed is
reached, pressing the accelerator
pedal no longer has any effect.
The limiter operates with a programmed
speed of at least 18 mph (30 km/h); it
remains active regardless of any action
on the brake and clutch pedals.
The operating actions must be
carried out:
- when stationary, with the
engine running,
or
- with the vehicle moving. When the speed limiter function is
active, pressing this button displays
the distance recorders.
After a few seconds or when this
button is pressed again, the display
returns to the speed limiter function. Storing a speed
A speed can be stored without
activating the limiter.
Press buttons
2 and 3 b r i e l y t o
decrease or increase by 1 mph
(1 km/h).
An extended press decreases or
increases by 5 mph (5 km/h).
A maintained press decreases or
increases the programmed speed in
steps of 5 mph (5 km/h).
Selecting the function
Place the dial 1 in the LIMIT
position. The limiter is not yet
active. By default, the display
indicates: Activating/deactivating the limiter
Pressing button
4 once activates
the limiter, pressing the button again
deactivates it.
When the limiter is active, the display
indicates (e.g. at 70 mph (110 km/h)):
* According to country.
Instrument panel display SPEED LIMITER *
Page 116 of 212
DRIVING
103
This cruise control, of the new
generation, is linked with the speed
limiter. It has a display on the
instrument panel to indicate the
memorised reference speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or
activated, the vehicle speed must be
greater than 25 mph (40 km/h) with at
least fourth gear engaged for vehicles
i t t e d w i t h a m a n u a l g e a r b o x .
O n v e h i c l e s i t t e d w i t h a n a u t o m a t i c
gearbox, the lever must be in
position D , or in at least second gear
in sequential mode. When the cruise control function
is activated, pressing this button
enables you to display the distance
recorders.
After a few seconds or when this
button is pressed again, the display
returns to the cruise control function. First activation/memorising a
reference speed
As soon as you reach the chosen
speed, press button
2 or 3 . This
memorises the speed and the display
indicates (e.g. at 70 mph (110 km/h)):
Selecting the function
Place switch 1 in the CRUISE
position. The cruise control is
not yet active and no speed has
been memorised. The display
indicates:
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
T h e v a l u e m e m o r i s e d l a s h e s . W h e n
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
Cancelling the cruise control
If you wish to cancel the cruise
control:
Press button 4 or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
CRUISE CONTROL * Instrument panel display
* According to country.
Page 118 of 212
DRIVING
105
This cruise control has a display on
the instrument panel to indicate the
memorised reference speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or
activated, the vehicle speed must be
greater than 25 mph (40 km/h) with at
least fourth gear engaged for vehicles
i t t e d w i t h a m a n u a l g e a r b o x .
O n v e h i c l e s i t t e d w i t h a n a u t o m a t i c
gearbox, the lever must be in position
D or at least second gear must be
engaged in sequential driving mode. When the cruise control function
is activated, pressing this button
enables you to display the distance
recorder.
After a few seconds or when this
button is pressed again, the display
returns to the cruise control function. First activation/memorising a
reference speed
As soon as you reach the chosen
speed, press button
2 or 3 . This
memorises the speed and the display
indicates (e.g. at 70 mph (110 km/h)):
Selecting the function
Place switch 1 in the ON
position. The cruise control is
not yet active and no speed has
been memorised. The display
indicates:
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
T h e v a l u e m e m o r i s e d l a s h e s . W h e n
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
Cancelling the cruise control
If you wish to cancel the cruise
control:
Press button 4 or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
* According to country.
Instrument panel display CRUISE CONTROL *
Page 127 of 212
CHECKS
115
CHECKING THE LEVELS
There are two marks on
the dipstick:
A = maximum
N e v e r i l l p a s t t h i s m a r k .
B = minimum
Oil change
According to the information given in
the servicing booklet.
Viscosity selection
In all cases, the oil selected must
meet the manufacturer’s require-
ments.
Note: the coolant does not need to
be changed.
Dipstick
Cooling system
U s e t h e l u i d r e c o m m e n d e d b y t h e
manufacturer.
When the engine is warm, the tem-
perature of the coolant is controlled
by the engine fan. This fan can oper-
ate with the ignition off.
I n t h e c a s e o f v e h i c l e s i t t e d w i t h
a p a r t i c l e e m i s s i o n i l t e r , t h e f a n
can operate after the vehicle has
s t o p p e d , e v e n w h e n t h e e n g i n e i s
cold.
In addition, as the cooling system is
pressurised, wait for at least one hour
after the engine has stopped before
carrying out any work.
Slacken the cap by two turns to re-
lease the pressure to prevent any
risk of scalding. When the pressure
has dropped, remove the cap and
top up the level.
Windscreen and headlamp
w a s h l e v e l
Diesel additive level (Diesel
w i t h p a r t i c l e e m i s s i o n f i l t e r )
If the service warning light comes on,
accompanied by a message and an
audible signal, this indicates a low
diesel additive level.
This additive must be topped up.
Contact a PEUGEOT dealer as soon
as possible.
Brake fluid level
* According to engine.
Oil level
To maintain the reliability of
engines and emission control
systems, the use of additives
in engine oil is prohibited.
The level should always be
above the MIN mark and
close to the MAX mark.
P o w e r s t e e r i n g r e s e r v o i r
Remove the style trim * (see §
"Changing a bulb - Front lights").
Open the reservoir, with the engine
at ambient temperature. The level
should always be above the MIN.
mark and close to the MAX. mark.
For best quality cleaning and
for your safety, we would ad-
vise that you use products
recommended by PEUGEOT.
Check the level regularly and
top up between changes. The
maximum consumption is 0.5 l
per 600 miles (1 000 km).
Check the level with the ve-
hicle level, engine cold, using the oil
level gauge on the instrument panel
or the dipstick. Replacement must be car-
ried out according to the
manufacturer’s servicing
schedule.
U s e l u i d s r e c o m m e n d e d b y
t h e m a n u f a c t u r e r , w h i c h f u l i l D O T 4
standards.
Page 144 of 212
10PRACTICAL INFORMATION
129
Fuse N° Rating
Functions
F6 30 A Rear electric windows.
F7 5 A Front and rear courtesy lights, map reading lights, glove bo x lighting.
F8 20 A Audio equipment, audio/telephone, multifunction display
, alarm siren, alarm unit, trailer fuse
box, driving school module, steering wheel controls supply.
F9 30 A 12 V front socket, 12 V rear socket.
F10 15 A A u t o m a t i c g e a r b o x c o n t r o l u n i t , t y r e u n d e r - i n l a t i o n c o n t r o l u n i t , S T O P s w i t c h .
F11 15 A D i a g n o s t i c s o c k e t , p a r t i c l e e m i s s i o n i l t e r u n i t , l o w c u r r e n t i g n i t i o n s w i t c h .
F12 15 A Driving school module, rear parking assistance.
F13 5 A Engine fuse box, rain and brightness sensor.
F14 15 A Trailer fuse box, instrument panel, air bags and pre-tensioners
unit, automatic air conditioning,
hands-free kit.
F15 30 A Locking and deadlocking.
F16 - PARC shunt.
F17 40 A Heated rear screen.