2007.5 Peugeot 307 stop start
[x] Cancel search: stop startPage 110 of 212
DRIVING
98
HANDBRAKE
Applying
Pull the handbrake to immobilise
your vehicle. When the vehicle is being
driven, illumination of
this warning light and
of the STOP warning
light, accompanied by an
audible signal and a message on the
multifunction etdisplay, indicates that
the handbrake is still on or has not
been properly released.
When parking on a slope,
direct your wheels towards
the pavement and pull the
handbrake.
Releasing
Pull on the handle and press the
button to release the handbrake.
The four or six speed automatic
gearbox offers a choice between
the comfort of integral automatic
operation , enhanced by a sport and
a snow programme, or manual gear
changing .
P ark: to immobilise the vehicle or
start the engine , with the handbrake
on or off.
R everse: to reverse (select this
position with the vehicle stationary,
engine at idle).
N eutral: to start the engine and to
park , with the handbrake on.
Note: if position N is engaged
inadvertently while driving, allow
the engine to return to idle before
engaging position D to accelerate.
D rive: for driving in automatic
mode.
M anual: to select the gears.
S : sport programme.
: snow programme.
Gear selection gate
Move the lever in the gate to
select a position.
The indicator light for the selection is displayed on the instrument
panel display.
Starting the engine
with the handbrake applied,
select position P or N in the gate,
turn the ignition key to the
Starting position.
Otherwise, you are warned by an
audible signal and a message on the
multifunction display.
"PORSCHE TIPTRONIC
SYSTEM" AUTOMATIC
GEARBOX
Page 111 of 212
DRIVING
98
HANDBRAKE
Applying
Pull the handbrake to immobilise
your vehicle. When the vehicle is being
driven, illumination of
this warning light and
of the STOP warning
light, accompanied by an
audible signal and a message on the
multifunction etdisplay, indicates that
the handbrake is still on or has not
been properly released.
When parking on a slope,
direct your wheels towards
the pavement and pull the
handbrake.
Releasing
Pull on the handle and press the
button to release the handbrake.
The four or six speed automatic
gearbox offers a choice between
the comfort of integral automatic
operation , enhanced by a sport and
a snow programme, or manual gear
changing .
P ark: to immobilise the vehicle or
start the engine , with the handbrake
on or off.
R everse: to reverse (select this
position with the vehicle stationary,
engine at idle).
N eutral: to start the engine and to
park , with the handbrake on.
Note: if position N is engaged
inadvertently while driving, allow
the engine to return to idle before
engaging position D to accelerate.
D rive: for driving in automatic
mode.
M anual: to select the gears.
S : sport programme.
: snow programme.
Gear selection gate
Move the lever in the gate to
select a position.
The indicator light for the selection is displayed on the instrument
panel display.
Starting the engine
with the handbrake applied,
select position P or N in the gate,
turn the ignition key to the
Starting position.
Otherwise, you are warned by an
audible signal and a message on the
multifunction display.
"PORSCHE TIPTRONIC
SYSTEM" AUTOMATIC
GEARBOX
Page 112 of 212
DRIVING
99
Moving off
With the engine running, to move off
from position P :
it is essential to press the brake
pedal,
release the handbrake,
select position R , D or M , then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
You can also move off from position N .
When the engine is at idle,
brakes not applied, if position
R , D or M is selected the
vehicle moves even without
the accelerator being pressed.
For this reason, do not leave
children unsupervised inside the
vehicle, with the engine running .
If the lever is not in position P , an
audible signal is heard and a message
appears when the driver’s door is
opened or approximately 45 seconds
after the ignition is switched off. Move
the lever to P . The audible signal
stops and the message disappears. When maintenance opera-
tions need to be carried out
with the engine running, ap-
ply the handbrake and select
position
P . Never select position
N when
the vehicle is moving.
Never select positions P
or R unless the vehicle is
stationary.
Never change between positions
to optimise braking on a slippery
surface.
Sport and snow programmes
In addition to the auto-adaptive
programme, there are two special
programmes.
The programme is displayed on the
instrument panel screen.
Automatic operation
Automatic changing of the four or
six gears:
select position D in the gate.
The gearbox automatically adapts the
gear in relation to the style of driving,
t h e r o a d p r o i l e a n d t h e v e h i c l e l o a d .
The gearbox is then operating in
auto-adaptive mode, without any
action on your part.
For immediate maximum acceleration
without touching the gear lever, press
the accelerator pedal down as far as
it will go (kick down). The gearbox
will automatically change down or
maintain the gear selected until
maximum engine speed is reached.
When braking, the gearbox will
automatically change down in order
t o p r o v i d e e f i c i e n t e n g i n e b r a k i n g .
If you take your foot off the accelerator
suddenly, the gearbox will not
change to a higher gear for reasons
of safety. Sport programme
Press button S once the engine
has been started.
The gearbox automatically favours
sporty driving and more dynamic
acceleration.
Snow programme
This programme improves starting
and drive when traction is poor.
Press button once the engine
has been started.
The gearbox adapts to driving on
slippery roads.
Note: you can return to the auto-
adaptive programme at any time.
Press button S or again to
switch off the programme you are
in.
Page 149 of 212
10PRACTICAL INFORMATION
134
E C O N O M Y M O D E F U N C T I O N
After the engine has stopped, certain
functions (windscreen wiper, electric
windows, sunroof, courtesy lights,
audio equipment, telephone, dipped
headlamps, etc.) can only be used for
a combined duration of approximately
thirty minutes, to prevent discharging
the battery.
Once the thirty minutes are over, a
switching to economy mode message
appears on the multi-function display
and the active functions are put on
standby.
These functions are reactivated
automatically next time the vehicle is
driven.
In order to resume the use of these
functions immediately, the engine
must be started and left to run for a
few minutes.
The time available to you will then
be double the duration for which the
engine is left running. However, this
p e r i o d w i l l a l w a y s b e b e t w e e n i v e
and thirty minutes. A l a t b a t t e r y p r e v e n t s t h e
engine from starting.
L O A D R E D U C T I O N
F U N C T I O N
When driving, certain functions (air
conditioning, heated rear screen,
heating system for passenger
compartment of diesel vehicles, etc.)
may be switched off temporarily,
depending on the level of battery
charge.
Reactivation of these functions is
automatic, once the battery charge is
s u f i c i e n t .
Note: at the risk of discharging the
battery, the functions that have been
switched off may be reactivated
manually.
Note: if the telephone is
being used when economy
mode starts, it will still be
p o s s i b l e t o i n i s h t h e c a l l .
Page 193 of 212
178
MENUESCLIST
MENU
2
1
Press the end of the lights stalk to start the voic
e
recognition.
Say the words one by one and wait for the audible
c o n i r m a t i o n s i g n a l b e t w e e n e a c h w o r d .
The list which follows is exhaustive.
To display the list of available voice commands, pr
ess
the end of the lights stalk to start the voice reco gnition,
then say HELP or WHAT CAN I SAY.
For the same operation, press and
hold the MENU button and select the
function VOICE COMMANDS LIST.
VOICE COMMANDS LIST LEVEL 1
display
call
changer
guide to
t r a f i c i n f o
CD player/jukebox
navigation
radio
SMS/message
telephone
LEVEL 2
audio
guidance
navigation
trip computer
telephone
description
disc number
previous/next disc
random play
list
track number
previous/next track
repeat
scan
description
display
read
random play
list
track number
previous/next track
d i r e c t o r y ( M P 3 C D )
scan
stop/resume
directory
show
zoom out/in
autostore
list
memory
previous/next
display
read
voice mailbox
last number
voice message service
directoryLEVEL 3
1 … 20
1 ... 20
previous/next
repeat
destination
description
vehicle
1 … 6
descriptionVOICE COMMANDS
DISPLAYING THE LIST AND USING THEM
Page 200 of 212
196
QUESTIONSOLUTION
RESPONSE
The stored stations do
not function (no sound,
8 7 . 5 M h z i s d i s p l a y e d . . . ) An incorrect waveband is selected.
Press the BAND AST button to return to the
w a v e b a n d ( A M , F M 1 , F M 2 , F M A S T ) o n w h i c h t h e
stations are stored.
T h e t r a f i c a n n o u n c e m e n t
( T A ) i s d i s p l a y e d . I d o
n o t r e c e i v e a n y t r a f i c
information. T u n e t o a r a d i o s t a t i o n w h i c h b r o a d c a s t s t r a f i c
information.
T h e r a d i o s t a t i o n i s n o t p a r t o f t h e r e g i o n a l t r a f i
c i n f o r m a t i o n n e t w o r k .
The quality of reception
of the radio station
listened to gradually
deteriorates or the
stored stations do
not function (no
sound, 87.5 Mhz is
d i s p l a y e d . . . ) . The vehicle is too far from the transmitter used by
the station listened to or
there is no transmitter in the geographical area th rough which the vehicle
is travelling.
T h e e n v i r o n m e n t ( h i l l s , b u i l d i n g s , t u n n e l s , b a s e m e n t c a r p a r k s . . . ) b l o c k
reception, including in RDS mode.
The aerial is absent or has been damaged (for examp le when going
t h r o u g h a c a r w a s h o r i n t o a n u n d e r g r o u n d c a r p a r k ) .Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
This phenomenon is normal and does not
indicate a failure of the audio equipment.
Have the aerial checked by a PEUGEOT dealer.
Sound cut-outs of 1
to 2 seconds in radio
mode. During this brief sound cut-out, the RDS searches f
or any frequency
permitting better reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
With the engine off,
the audio equipment
switches off after a
few minutes of use. When the engine is switched off, the audio equipmen
t operating time
depends on the battery charge.
The switch-off is normal: the audio equipment switc hes to economy mode
and switches off to prevent discharging of the vehi cle’s battery.Start the vehicle’s engine to increase the battery
charge.
The message "the audio
system is overheated"
appears on the display. Switch the audio system off for a few minutes to
allow the system to cool.
In order to protect the installation if the surroun
ding temperature is too
high, the audio equipment switches to an automatic thermal protection
mode leading to a reduction of the volume or stoppi ng of the playing of the
CD.
Page 201 of 212
197
QUESTIONSOLUTION
RESPONSE
The TRAFFIC INFO
box is ticked. However,
c e r t a i n t r a f i c j a m s
along the route are not
indicated in real time. On starting, it is several minutes before the syste
m begins to receive the
t r a f i c i n f o r m a t i o n . W a i t u n t i l t h e t r a f i c i n f o r m a t i o n i s b e i n g r e c e i v e d
c o r r e c t l y ( d i s p l a y i n g o f t h e t r a f i c i n f o r m a t i o n
s y m b o l s o n t h e m a p ) .
I n c e r t a i n c o u n t r i e s , o n l y m a j o r r o u t e s ( m o t o r w a y s , . . . ) a r e l i s t e d f o r t h e
t r a f i c i n f o r m a t i o n .
The time taken to calculate
a route sometimes seems
longer than usual.
This phenomenon is normal. The system is
d e p e n d e n t o n t h e t r a f i c i n f o r m a t i o n a v a i l a b l e .
The performance of the system may slow down tempora rily if a CD is
being copied onto the Jukebox at the same time as a route is being
calculated. Wait until the CD has been copied or stop the
copying before starting the guidance function.
Does the emergency call
function work without a
SIM card? No, European regulations impose the presence of a S
IM card in order to
make an emergency call. Insert a valid SIM card in the slot on the RT4 GPS
audio/telephone.
My SIM card is not
recognised. The RT4 accepts 3.3 V SIM cards, the old 5 V and 1.
8 V SIM cards are not
recognised. Contact your telephone operator.
After changing a wheel,
the system loses its
location. The RT4 GPS audio/telephone uses the wheel rotation
information to
i m p r o v e t h e G P S l o c a t i n g f u n c t i o n . I f a w h e e l i s c h a n g e d o r d e l a t e s
suddenly, the system recalculates the location. For approximately
ten minutes, this recalculation may affect the qual ity of the locating function.Wait until the system has completed its
recalculation.
The table below groups together the answers to the
most frequently asked questions concerning the RT4 audio/telephone.
The location on the
map is incorrect or
inaccurate.
The altitude is not
displayed. On starting, the initialisation of the GPS may take
up to 3 minutes to
receive more than 3 satellites correctly. Wait until the system has started up completely.
Check that there is a GPS coverage of at least 3
satellites (long press on the MENU button, then
select AUDIO/TELEPHONE DIAGNOSTICS, then
G P S C O V E R A G E ) .
D e p e n d i n g o n t h e g e o g r a p h i c a l e n v i r o n m e n t ( t u n n e l , . . . ) o r t h e w e a t h e r ,
the conditions of reception of the GPS signal may v ary.This phenomenon is normal. The system is
dependent on the conditions of reception of the
GPS signal.