DRIVING
105
This cruise control has a display on
the instrument panel to indicate the
memorised reference speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or
activated, the vehicle speed must be
greater than 25 mph (40 km/h) with at
least fourth gear engaged for vehicles
i t t e d w i t h a m a n u a l g e a r b o x .
O n v e h i c l e s i t t e d w i t h a n a u t o m a t i c
gearbox, the lever must be in position
D or at least second gear must be
engaged in sequential driving mode. When the cruise control function
is activated, pressing this button
enables you to display the distance
recorder.
After a few seconds or when this
button is pressed again, the display
returns to the cruise control function. First activation/memorising a
reference speed
As soon as you reach the chosen
speed, press button
2 or 3 . This
memorises the speed and the display
indicates (e.g. at 70 mph (110 km/h)):
Selecting the function
Place switch 1 in the ON
position. The cruise control is
not yet active and no speed has
been memorised. The display
indicates:
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
T h e v a l u e m e m o r i s e d l a s h e s . W h e n
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
Cancelling the cruise control
If you wish to cancel the cruise
control:
Press button 4 or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
* According to country.
Instrument panel display CRUISE CONTROL *