2007.5 Citroen C5 display

129
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source (CD already inserted), press button D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the Baudio system will automatically switch to radio source.
If the CD is not removed within 10 to 15 seconds of being ejected, it will auto-matically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next Ktrack.
Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previous track.
Press the buttons successively to skip several tracks at a time.
You can also perform this operation using button G or button 9 at the steer-9ing wheel.
When the track listing is displayed, select the desired track using buttons Jor M then validate with button L.
C D S O U R C E
You can also do this via the controls 7and 8 at the steering wheel.8
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button K or KN, respectively for fast forward or rapid reverse with accelerated sound.
You can also do this via the controls 7and 8 at the steering wheel.8
Play resumes as normal when the but-ton is released.
Menu
This menu allows activation/deactiva-tion of two options:Playback of the fi rst 7 seconds (approx.) of each track of the CD.Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button O and Oproceeding as for Scanning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing onbutton L. You can then access the Audio menu.Note: If one of these options is active, it remains active for CD changer source.

130
IV
MP3 CDs
The MP3 format (MPEG 1,2 & 2,5 Audio Layer 3) is an audio compres-sion standard that permits recording of 10 times as many musical fi les on one CD.
Your radio only plays back fi les which have the extension “.mp3”. Other types of fi les (.wav, .mpg4, .ogg, midi...) can-not be played back.
When you insert an MP3 CD, the radio searches all the musical tracks. Playback may require some tens of seconds before starting.
Playback of the MP3 CD is optimised if the level of the cover is limited to 2.
Burning format
Some burnt CDs cannot be read by your equipment (quality, speed of recording, etc.).
When you burn a CD-R or CD-RW, select the burning standard ISO 9660 level 1,2 or Joliet. Playback of other formats may not occur correctly.
Use the Joliet standard to burn multi-session CDs.
On a given CD, always use the same burning standard.
To obtain the best possible acous-tic quality, select the lowest burning speed.
It can handle transmission speeds of 8 to 320 kbits/s and playback of 22,05 to 44,1 kHz.
M P 3 C D S O U R C E
MP3 CD player
Your Audio CD system may be MP3 compatible.
As you insert a CD recorded in MP3 format, playback starts of the fi rst song of the fi rst CD-cover.
You can select a particular track by using buttons N or K and CD-cov-ers using buttons J or M.
To select a track
To display the list of CD-covers, press on button G.
Use buttons J or M to select the CD-cover you wish to listen to.
To open a CD-cover, press L.
Use buttons N or K to select the track you wish to listen to.
Validate with a press on L.
Menu
This menu is for activation/deacti-vation of three options:Playback of the fi rst 7 seconds (approx.) of each track of the CD.
Repetition of the current CD-cover.Random playback of CD-cover tracks by CD-cover.
This can be accessed in two ways:Either by pressing button Oand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing onbutton L. You can then access the Audio menu.

132
IV
B L U E T O O T H®
Note:Refer to the user instructions to familiarise yourself with the features of twinning.The telephone detects the Blue-tooth®e tele tel system on your vehicle. ®
“CITROËN syste sys““” displays on your tel-ephone.
You should then select “CITROËN” on your telephone controls. Next you have to accept or decline this twinning.Note: If the 4 twinning memories are already being used, you must select a memory that is already attributed although the telephone twinned to this location will no longer be.Next the telephone asks you to enter an identifi cation code: 1234.Validate.Note: This entry may be demanded earlier in the twinning sequence.
The telephone is now twinned to your Bluetooth®ephonepho system. For immediate ®
access to the Bluetooth®For For functions, it ®
may be necessary to make a connec-tion (see following page Confi gura-tion : Connecting a twinned mobile telephone).oneone
Once the twinning is fi nished, you will be able to connect your telephone via the “Main menu““”.

133
IV
Main Menu
Press on the Menu button O to access to Main menu, then select the “Telephone” icon using but-tons J ou M), then validate the selection via button L.
You have access:To the Directory.
To Confi guration.To Communication Manage-ment.
You access your choices via (Jou M), then you validate them with a press on L.
This main menu can also be accessed by pressing button Ethen button L.
Folder
This menu lets you open:The telephone Directory of the telephone that is connected.The Calls List.
Telephone directory
The starting of a telephone call can be done independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J or M, then vali-date with a press on L.

136
IV
F R E Q U E N T L Y - A S K E D Q U E S T I O N S
QUESTIONANSWERSOLUTION
There is a discrepancy in sound quality between the different audio sources (radio, CD, CD changer etc.).
To achieve an optimum listening quality, the audio adjustments (Volume, Bass, Treble, Ambiance, Loudness) can be adapted to each of the different sound sources, which can produce audible shifts when you change the source (radio, CD, CD changer etc.).
Check that the audio adjustments (Vol-ume, Bass, Treble, Ambiance, Loud-ness) are adapted to your preferences for each of the sources being listened to.
The CD immediately ejects.
The CD is the wrong way up, is unplayable, does not contain audio data or contains an audio format that the radio cannot play back.
Check that you have inserted the CD the right way up in the CD player.
Check the condition of the CD: the CD cannot be played back if it is too dam-aged.
Check the contents if it is a burnt CD: refer to the advice given in the chapter on Audio System.
For reasons of poor quality, some burnt CDs will not be played back by the audio system.
The CD changer does not play back DVDs.
The CD changer does not play back MP3 CDs.
The CD player sound is downgraded.The CD is scratched or of poor quality.Insert only CDs of good quality and keep them in good condition.
The pre-set stations do not work (no sound, 87,5 Mhz is displayed, etc.).
The waveband selected is not the correct one.
Press on the button BND to retrieve the wave band (AM, FM1, FM2, FMAST) where the stations have been memo-rised.
The table below brings together the answers to the questio ns that are the most frequently asked.

137
IV
F R E Q U E N T L Y - A S K E D Q U E S T I O N S
QUESTIONANSWERSOLUTION
Traffi c Announcements (TA) is displayed. I do not receive any traffi c informa-tion or public announce-ments.
The particular radio station is not in the regional traffi c information network.Change to a radio station that does broadcast traffi c information.
The reception quality of the radio station being lis-tened to gradually deterio-rates.
The vehicle is too distant from the transmit-ter, or no transmitter is present in the geo-graphical area you are passing through.
Activate the RDS function to allow the system to check whether a more pow-erful transmitter is to be found in the geographical area.
The environment (hills, high buildings, tun-nels, underground car parks, etc.) is blocking reception, even in RDS mode.
This phenomenon is normal and does not imply anything wrong with the radio.
The aerial is absent or has been damaged (for example after going through a car wash or in an underground car park).
Have the aerial checked by a CITROËN dealer.
Cutting of sound for 1 to 2 seconds in radio mode.
The RDS system during this brief sound cut-off is searching for a better frequency that might offer improved reception of the station.
Deactivate the RDS function if the phe-nomenon occurs too frequently and always on the same journey.
When the engine is not running, the radio stops after a few minutes.
When the engine is switched off, the work-ing time for the radio depends on the battery charge. The interruption is normal: the radio goes into economy mode, cutting off in order to save the vehicle’s battery.
You have to start the engine so as to increase the battery charge.
The message “the audio system is overheating” appears on the screen.
In order to protect the audio equipment in excessive ambient temperatures, the radio goes into an automatic thermic protection mode which results in a reduction in sound volume or stopping of the CD player.
Switch off the audio system for a few minutes in order to allow the system to cool down.

151
V
A
B
+ 1
- 4 - 3
+ 2
Starting the engine after disconnecting and reconnecting the battery1. Turn the ignition key.2. Wait approximately 1 minute before operating the starter in order to allow the electronic systems to re-initialise.
After the battery has been disconnected for a lengthy period o f time, it may be necessary to re-initialise the following functions:The anti-pinch on the windows.
The parameters of the multifunction display (date, time, language etc).
The Radio stations.The NaviDrive. See NaviDrive instructions.
Starting the engine with an assisting battery (except V6 HDi engine)
If the battery is discharged, it is possible to use either a separate emergency battery or a battery on another vehicle.A. Dischargedbattery (Under the bonnet).B. Assisting battery.
Check that the assisting battery has suffi cient voltage (12 V).
If you use the battery on another vehicle, stop the engine on the latter. The two vehicles must not come into direct contact with each other.
Connect the cables according to the order indicated in the diagram. Check orderthat the leads are well secured (risk of sparks).
Start the engine of the assisting vehicle. Let the engine run for around 1 minute at a slightly accelerated idle.
Operate the starter on the vehicle being assisted.
It is essential to follow the indicated sequence correctly.

22
1
9
11
53
8
6724
10
D E S C R I P T I O N O F T H E C O N T R O L S
It is recommended that you do not use the NaviDrive controls while your vehicle is moving. In some countries, certain commands may be deactivated to comply with national regulations.
1CD eject.
2Call in progress:Shor t press: End a call.
3Shor t press: Answer call.Display of telephone menu.
4Shor t press: Access to the CITROËN ser vices menu.Long press: Direct call to the CITROËN assistance ser vice.
5CD aper ture.
6
Shor t press:Cancellation of the current operation.Deletion of a superimposed display.Long press:Close main menu and return to the welcome screen.