Page 49 of 231
52
II
W I P E R S
Screen wash
Pull the screen wipe control stalk towards you.
The screen wash is accompanied by a timed wipe sequence. If the dipped beams are on, it is also accompanied by a timed headlamp wash.
Check that the wipers can operate freely in freezing temperatures.
Remove any accumulation of snow at the base of the windsc reen.
Changing the wiper blades
If changing the wiper blades, they must be stopped in the maintenance posi-tion. For this, switch off the ignition and then within one minute move the wiper control stalk. The wipers stand up vertically.
After replacement, switch on the ignition and move the wiper control stalk so that the wipers resume their normal position.
Remark: The maintenance position can also be used in snowy conditio ns to avoid a build up of snow.
Page 153 of 231
157
V
T A B L E O F F U S E S
Fuses under the bonnet
Ref.RatingFunction
F120AEngine control unit
F215AHorn
F310AScreen wash pump
F410AHeadlamp wash pump
F515AStarter
F610A A i r fl o w m e t e r - D i r e c t i o n a l h e a d l a m p s - D i a g n o s t i c s o c k e t
F710AAutomatic gearbox lever lock - Power steering
F825AStarter
F910AClutch switch - STOP switch
F1030AStarter
F1140AAir conditioning blower
F1230AWipers
F1340ABSI supply (ignition on)
F1430A-
F1510ARight-hand main beam
F1610ALeft-hand main beam
F1715ARight-hand dipped beam
F1815ALeft-hand dipped beam
F1915AStarter
F2010AStarter
F215AStarter
Page 156 of 231
160
VI
BC
D
EFA
C H A N G I N G B U L B S
H E A D L A M P S
Front headlamp unit with Xenon bulbs (D1S)
Bulbs:A Sidelamp: W5WB Dual-function Xenon lamp (dipped/main): D1SC Angular lighting: HP19D Daytime-running lamp: HP24
For the maintenance of the front headlamp unit and the changing of HP19, D1S and HP24 bulbs, con-tact a CITROËN dealer, bulbs, .
F r o n t h e a d l a m p s fi t t e d w i t h X e n o n b u l b s : B e c a u s e o f r i s k s o f e l e c t r o c u t i o n , w e a d v i s e y o u t o contact a CITROËN dealer if there is any problem. F r o n t h e a d l a m p s fi t t e d w i t h X e n o n b u l b s : B e c a u s e o f r i s k s o f e l e c t r o c u t i o n , w e a d v i s e y o u t o F r o n t h e a d l a m p s fi t t e d w i t h X e n o n b u l b s : B e c a u s e o f r i s k s o f e l e c t r o c u t i o n , w e a d v i s e y o u t o
You are advised to change the D1S bulbs at the same time, if one of them has failed.
Sidelamp1 Lift up the pegs E to remove the cover on the headlamp.2 Remove the protective cap F.3 Pull the bulb holder to remove it.4 Replace the bulb and replace the bulb holder.
5 Replace the protective cap F.6 R e p l a c e t h e c o v e r a n d fi x i t i n place using the pegs E.
Page 157 of 231
161
VI
E
ADCBGF
C H A N G I N G B U L B S
H E A D L A M P S
Main beam1 Lift up the pegs F to remove the cover on the headlamp.2 Remove the protective cap G.3 Disengage the retaining spring.4 Remove the bulb and replace it, paying attention to the direc- t i o n o f fi t t i n g .5 Replace the retaining spring.6 Replace the protective cap G.7 R e p l a c e t h e c o v e r a n d fi x i t i n place using the pegs F.
Sidelamp1 Lift up the pegs F to remove the cover on the headlamp.2 Remove the protective cap G.3 Pull the bulb holder to remove it.4 Replace the bulb and replace the bulb holder.5 Replace the protective cap G.6 R e p l a c e t h e c o v e r a n d fi x i t i n place using the pegs F.
HEADLAMP UNIT
Bulbs:A Main beam: H1B Sidelamp: W5WC Dipped beam: H7D Bend lighting: H7E Daytime-running lamp: HP24
For the maintenance of the front headlamp unit and the changing of HP24 bulbs, contact a CITROËN headlamp unit and the changing of changing of
dealer.
Halogen bulbs must not be changed until they have been off for a few minutes (risk of serious burns).
D o n o t t o u c h t h e b u l b d i r e c t l y w i t h y o u r fi n g e r s , u s e a l i n t - f r e e c l o t h .
It is essential that only anti-U.V. type bulbs are used in order not to damage the headlamp.
Page 158 of 231
162
VI
HI
Dipped beam1 Lift up the pegs F to remove the cover on the headlamp.2 Remove the protective cap H.3 Disconnect the connector by pressing it between the thumb a n d i n d e x fi n g e r .4 Free the bulb from its two metal clamps.5 Take out the bulb.6 Replace the bulb, exerting a slight axial force.7 Reconnect the connector, until it is all the way in.8 Replace the protective cap H.9 R e p l a c e t h e c o v e r a n d fi x i t i n place using the pegs F.
Bend lighting1 Lift up the pegs F to remove the cover on the headlamp.2 Remove the protective cap I.3 Disconnect the connector by pressing it between the thumb a n d i n d e x fi n g e r .4 Free the bulb from its two metal clamps.5 Take out the bulb.6 Replace the bulb, exerting a slight axial force.7 Reconnect the connector, until it is all the way in.8 Replace the protective cap I.9 R e p l a c e t h e c o v e r a n d fi x i t i n place using the pegs F.
C H A N G I N G B U L B S
H E A D L A M P S
Page 159 of 231
163
VI
ABD1C
2
C H A N G I N G B U L B S
H E A D L A M P S
Front direction indicator1 R e m o v e t h e fi x i n g s c r e w o f c o v e r A, tip the cover over and remove.2 R e m o v e t h e fi x i n g s c r e w o f l a m p B and pull the headlamp unit to remove it from the bumper.3 Detach the bulb C by pressing on bars 1 and 2.4 D i s c o n n e c t t h e c o n n e c t o r ( p u l l w h i l s t p r e s s i n g o n t h e g r e y t o n g u e u s i n g a fl a t s c r e w d r i v e r ) .5 Replace the bulb.6 Connect the connector (push the grey tongue in well).7 Replace the headlamp unit in the bumper.8 Screw the headlamp unit in.9 Position the cover using its guides and screw in.
Bulbs: HP24W
When replacing, be careful not to pinch the electrical cables.
Front foglamp1 R e m o v e t h e fi x i n g s c r e w o f c o v e r A using a torx tool, tip the cover over and remove.2 R e m o v e t h e fi x i n g s c r e w o f l a m p B using a torx tool and pull on the unit to remove it from the bumper.3 Disconnect the connector.4 Remove the bulb by performing a quarter of a turn.5 Replace the bulb.6 Connect the connector.7 Replace the headlamp unit in the bumper.8 Screw the headlamp unit in.9 Position the cover using its guides and screw in.
Bulbs: H8
Page 160 of 231
164
VIB
C
A
E
D
F
G
G
C H A N G I N G B U L B S
R E A R L A M P S
Rear lamp unit
Identify the failed bulb.
Bulbs:A Stop-lamps and sidelamps: P 21 W / 5 WB Sidelamp: R 5 WC Reversing lamp: H 21 WD Foglamp: H 21 WE Direction indicator: P 21 W
Rear lamp on boot1 Open the boot.2 U s i n g a fl a t s c r e w d r i v e r , r e m o v e t h e 3 c l i p s w h i c h fi x t h e t r i m i n t h e lamp area.3 Partially remove the trim F.4 Disconnect the connector.5 Detach the bulb holder G.6 Replace the bulb.7 Replace the bulb holder G.8 Connect the connector.9 R e p l a c e a n d fi x t h e t r i m F with its clips.
In some climatic conditions, mist may appear on the headlamp / indicator lenses. This is normal and will disappear (e.g. after the lamps have been on for a few minutes). If not, contact a CITROËN dealer. some climatic conditions, mist may appear on the h eadlamp / indicator lenses. This is normal and is no
