Page 7 of 231
I
10
IN BRIEF
D A S H B O A R D
Audio
Instrument panel menuMultifunction display menu
Telephone
Cruise control and Speed limiter
44
The “SET +, PAUSE, VOL+, MUTEThe “The “” buttons are located so that you can use them without needing to take your eyes off the road.
Page 19 of 231
22
II
ACDB
R E M O T E C O N T R O L
Note:The simultaneous use of other high frequency equipment (mobile telephones, domestic alarms, etc.) may momentar-ily hinder the operation of the remote control.
If there is a permanent fault, the remote control has to be reini-tialised. See “Changing remote control batteries”.
Page 25 of 231

28
II
S T E E R I N G L O C K - I G N I T I O N - S T A R T E R
NEVER REMOVE THE IGNITION KEY BEFORE THE ENGINE HAS COME TO A COMPLETE STOP.
IT IS ESSENTIAL ALWAYS TO DRIVE WITH THE ENGINE RUNNING, SO AS TO RETAIN STEERING AND BRAKING ASSISTANCE (risk of the steering lock engaging and loss of safety features).
When stationary, having removed the key, carefully turn the steering wheel if you wish to lock the steering.
S : Steering lock
To unlock the steering, gently move the steering wheel while turning the key, without exerting undue force.
When you remove the key, turn your steering wheel to lock the steering. The key can only be removed when in position S.
M : Drive position
The steering is unlocked (by turn-ing the key in position M, if neces-sary move the steering wheel).
D : Starting
Release the key as soon as the engine starts. Never turn it while the engine is running.
Economy mode
When the engine is stopped, some functions (radio, screen wipe , electric windows, sunroof, electric seats, telephone, video etc) are only electrically supplied for about 30 minutes, to avoid discharging the battery.
Once the 30 minutes are over, a message appears on the instrumen t panel screen and the active functions are put on standby.
The electrical components relating to comfort and also the headlamps (not sidelamps or hazard warning lamps) cut out automatically. To react ivate them, it is necessary to start the engine.
Page 41 of 231

44
II
1
2
10
9
3
4
5
6
7
8
F I X E D C E N T R E D C O N T R O L S S T E E R I N G
W H E E L
1
Rotate- Scroll through the different information screens on instrument panel- Move through the different instrument panel menus- Increase/reduction of values
Shor t press- Open the instrument panel menu (only when vehicle s tationar y)- Select and validate information
Long pressReset the trip computer (if the trip computer page is displayed)
2Shor t press- Cancel the current operation- Return to the previous instrument panel display
Long pressReturn to the original instrument panel display
3Shor t pressIncrease speed in steps of 1 km/h/memorisation of sp eed
Press and holdIncrease speed in steps of 5 km/h
4Shor t pressReduce speed in steps of 1 km/h/memorisation of spee d
Press and holdReduce speed in steps of 5 km/h
5Shor t pressSuspend or restar t cruise control/speed limiter (depending on mode selected)
6Shor t pressSelect cruise control or speed limiter (the cycle on this button always star ts with the speed limiter selector)
7Shor t pressDeactivation
8Shor t press
- Pick up an incoming call- Hang up during a call- Open the contextual telephone menu- Validate in the telephone list or menu
Long pressRefuse an incoming call
9S h o r t p r e s s / Long pressHorn
10Shor t pressActivation/deactivation of Black Panel mode (night d riving)
Page 59 of 231

63
II
BDC
A
BC
A
E
1234
M U L T I F U N C T I O N D I S P L A Y
T E L E M A T I C S
ControlsA. Access to the telematics multi-function display menu.B. Cancellation of the operation or return to the previous display.C. Scrolling through the menus of the telematics multifunction display. Validation using steer-ing wheel controls.D. Validation using radio panel.E Selection of the type of infor-mation presented on the telematics multifunction display (date, radio/CD/CD MP3/CD changer/jukebox, navigation information, telephone).
T r a f fi c i n f o r m a t i o n
See NaviDrive instruc-tions.
Navigation/guidance
See NaviDrive instruc-tions.
Audio
See NaviDrive instruc-tions.
Main Menu
Press on button A to display the telematics multifunction display “Main Menu”. This menu gives you access to the following functions:
Telephone and telematic services
See NaviDrive instruc-tions.
Map
See NaviDrive instruc-tions.
1 Outside temperature.2 Date.3 Telephone.4 Time.
When the outside temperature is between +3 °C and –3 °C, the t e m p e r a t u r e d i s p l a y fl a s h e s ( r i s k of ice).Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is stationary in bright sunlight.
The driver is advised not to use the controls described opposite whilst driving.
C o n fi g u r a t i o n ,
allows you to adjust vari-ous settings (date, time...).
Video Menu, allows you to adjust various video set-tings.
Page 128 of 231

132
IV
B L U E T O O T H®
Note:Refer to the user instructions to familiarise yourself with the features of twinning.The telephone detects the Blue-tooth®e tele tel system on your vehicle. ®
“CITROËN syste sys““” displays on your tel-ephone.
You should then select “CITROËN” on your telephone controls. Next you have to accept or decline this twinning.Note: If the 4 twinning memories are already being used, you must select a memory that is already attributed although the telephone twinned to this location will no longer be.Next the telephone asks you to enter a n i d e n t i fi c a t i o n c o d e : 1234.Validate.Note: This entry may be demanded earlier in the twinning sequence.
The telephone is now twinned to your Bluetooth®ephonepho system. For immediate ®
access to the Bluetooth®For For functions, it ®
may be necessary to make a connec-tion (see following page C o n fi g u r a -tion : Connecting a twinned mobile telephone).oneone
O n c e t h e t w i n n i n g i s fi n i s h e d , y o u w i l l b e able to connect your telephone via the “Main menu““”.
Page 129 of 231
133
IV
Main Menu
Press on the Menu button O to access to Main menu, then select the “Telephone” icon using but-tons J ou M), then validate the selection via button L.
You have access:To the Directory.
T o C o n fi g u r a t i o n .To Communication Manage-ment.
You access your choices via (Jou M), then you validate them with a press on L.
This main menu can also be accessed by pressing button Ethen button L.
Folder
This menu lets you open:The telephone Directory of the telephone that is connected.The Calls List.
Telephone directory
The starting of a telephone call can be done independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J or M, then vali-date with a press on L.
Page 130 of 231
134
IV
B L U E T O O T H®
Voice recognition
Pressing on the end of the lighting control stalk 10 starts telephone voice recognition.
Voice recognition allows you to make a call to a number for which you have recorded a label on the mobile telephone that is twinned and connected.
Remark:
It is possible to stop the call, pro-vided the dialling has not yet com-menced, with a short press on the end of the lighting control stalk 10.
Remarks:While you are on a call, the audio source currently being listened to is paused.
Some ring tones on your mobile telephone may not be recog-nised by the Bluetooth®not be recog-not be recog- system ®
on your vehicle. A different ring tone will be chosen by the sys-tem.