2007.5 Citroen C5 DAG Owner's Manual

61
II
BC
A
BDC
AC
231
DISPLAY CONFIGURATION
To adjust the display bright-ness and contrast:1 Press on A.2 Using C, select the “Brightness - video adjustments” menu. Confi rm by pressing on C on the steering wheel or on D on the radio panel.3 Select the display confi guration with a press on C. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.4 Select the brightness adjust-ment. Confi rm by pressing on C on the steering wheel or on D on the radio panel.5 Using C, select normal or alternative display mode, then validate by pressing on C on the steering wheel or on D on the radio panel. To adjust the brightness, select “+” or “-” and confi rm the adjustment by pressing on C.6 Validate “OK” on the screen.
Radio - CD
(See “Radio” chapter).
Display confi guration, allowing you to adjust:The display brightness and contrast.
The time and date.
The units used for the outside temperature display.

62
II
BC
A
BDC
A
To choose the units for the outside temperature dis-play:1 Press on A.2 Using C, select the “Choice of temperature unit” menu. Con-fi rm by pressing on C on the steering wheel or on D on the radio panel.3 Select the unit using C. Con-fi rm by pressing on C on the steering wheel or on D on the radio panel.4 Validate “OK” on the screen.
To adjust the date and the time:1 Press on A.2 Using C, select the “Date and time adjustment” menu. Con-fi rm by pressing on C on the steering wheel or on D on the radio panel.3 Select the display confi guration with a press on C. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.4 Using B, adjust the date and time, then confi rm by pressing on C on the steering wheel or on D on the radio panel.5 Press C to select the values you wish to modify. Confi rm by pressing on C on the steer-ing wheel or on D on the radio panel.6 Validate “OK” on the screen.
Selection of the type of infor-mation displayed
Consecutive presses on the end of the wiper control stalk allow you to select the type of information pre-sented on the multifunction display (date or radio/CD/CD MP3/CD changer).
M U L T I F U N C T I O N D I S P L A Y

63
II
BDC
A
BC
A
E
1234
M U L T I F U N C T I O N D I S P L A Y
T E L E M A T I C S
ControlsA. Access to the telematics multi-function display menu.B. Cancellation of the operation or return to the previous display.C. Scrolling through the menus of the telematics multifunction display. Validation using steer-ing wheel controls.D. Validation using radio panel.E Selection of the type of infor-mation presented on the telematics multifunction display (date, radio/CD/CD MP3/CD changer/jukebox, navigation information, telephone).
Traffi c information
See NaviDrive instruc-tions.
Navigation/guidance
See NaviDrive instruc-tions.
Audio
See NaviDrive instruc-tions.
Main Menu
Press on button A to display the telematics multifunction display “Main Menu”. This menu gives you access to the following functions:
Telephone and telematic services
See NaviDrive instruc-tions.
Map
See NaviDrive instruc-tions.
1 Outside temperature.2 Date.3 Telephone.4 Time.
When the outside temperature is between +3 °C and –3 °C, the temperature display fl ashes (risk of ice).Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is stationary in bright sunlight.
The driver is advised not to use the controls described opposite whilst driving.
Confi guration,
allows you to adjust vari-ous settings (date, time...).
Video Menu, allows you to adjust various video set-tings.

64
II
A
B
F
CDE
G
IH
M U L T I F U N C T I O N D I S P L A Y
T E L E M A T I C S
Other functions of the confi guration menu: See NaviDrive instructions.
In the confi guration menu:Rotate the control to select the menu A.Press on the control to validate.

65
II
A3
5
4
2
1
This driving assistance function allows you to drive at the speed of your choice without the need to action the accelerator. It is active over speeds of around 40 km/h (25 mph).
Remark: For the function to be active, the gearbox must be in at least:4th gear for manual gearboxes.2nd gear for automatic gear-boxes.
The cruise control controls are located on the left-hand side of the steering wheel and cruise control information is displayed in zone Aof the instrument panel.

66
II
3
5
4
2
1
C R U I S E C O N T R O L
To cancel the functionPress on button 5.
Select the cruise control func-tion.Or stop the engine.
The speed that was chosen is no longer memorised.
If there is a malfunction, a mes-sage is displayed accompanied by a sound signal and lighting of the SERVICE warning lamp.
Contact a CITROËN dealer.

67
II
3
5
4
2
1
A
S P E E D L I M I T E R
This driving aid allows you to choose a maximum speed that you do not wish to exceed. This has to be over 30 km/h (19 mph).
The speed limiter controls are located on the steering wheel.Note: The speed limiter informa-tion is displayed in zone A of the instrument panel.
To select the function
Press on button 4 to select speed limiter mode “LIMIT”.
The selection is confi rmed by the display of the function in zone A of the instrument panel.
To adjust the maximum speed
With the engine running, you can adjust the memorised maximum speed, displayed in zone A, by pressing on:Button 1 to increase the memo-rised maximum speed.
Button 2 to decrease the mem-orised maximum speed.
Remark: Successive presses will modify the cruise speed in steps of 1 km/h and a continuous press in steps of 5 km/h (3 mph).

68
II
3
5
4
2
1
A
S P E E D L I M I T E R
Suspension or resumption of maximum speed
Press on button 3.
Temporary override of the maximum speed
The accelerator pedal has an end-of-travel switch. In order to exceed the memorised maximum speed at any time, you can press the pedal all the way down. While the speed is being exceeded, the speed dis-played in zone A will fl ash. You have only to release the accelera-tor pedal to return below the maxi-mum speed, to restore the func-tion.
Remark: the speed will also fl ash if the speed limiter is not able to prevent the vehicle from exceeding the programmed speed (e.g. on a steep descent or under excessive acceleration).
To reactivate the speed limiter, release the accelerator to slow to a speed lower than the programmed speed.
To cancel the functionPress on button 5.Select the speed limiter func-tion.
Or stop the engine.
The speed that was chosen is no longer memorised.
If there is a malfunction, a mes-sage is displayed accompanied by a sound signal and lighting of the SERVICE warning lamp.
Contact a CITROËN dealer.