2007.5 Citroen C5 DAG audio
[x] Cancel search: audioPage 118 of 231
122
IV
B U T T O N C O N T R O L S
AOn / Off.Volume adjustment.
BCD eject.
CCD aperture.
DSOURCESelection of source (CD/MP3 CD and CD changer source).
EBAND/AST
Short press: Selection of frequency bands and memory banks.Long press: Automatic pre-set function (Autostore).
FCall-up of audio adjustments:Sound ambiences, bass, treble, loudness, fade, balance, speed-sensitive volume.
GLIST
Radio source:Short press: Display of the list of radio stations available (30 maximum).Long press: Update of list of stations.CD source: Display of list of tracks of the CD.
HESCShort press: Cancel the current operation or delete a super-imposed display.Long press: Return to the permanent display.
ITA /PT YShort press: TA function (road information).Long press: PTY function (eélection of programme type).
J
Radio source: Manual search of higher frequencies.CD/MP3 changer source: Selection of previous CD / previous CD-cover.Other sources: Scrolling in the Main Menu.
K
Radio source: Automatic search of higher frequencies.CD source, CD changer source and MP3 source:Short press: Forward search for tracks.Long press: Fast forward with accelerated sound.Other sources: In the menus, choice of your adjustments.
If your vehicle has the Bluetooth® system:® Selection of characters.
LOK
Button for validation and activation/deactivation of certain functions.If your vehicle has the Bluetooth® system: Answer call, end call.
M
Radio source: Manual search of lower frequencies.CD/MP3 changer source: Selection of the next CD / next CD-cover.Other sources: Scrolling in the Main Menu.
N
Radio source: Automatic search of lower frequencies.CD source, CD changer source and MP3 source:Short press: Reverse search for tracks.Long press: Rapid reverse with accelerated sound.Other sources: In the menus, choice of your adjustments.If your vehicle has the Bluetooth® system:® Selection of characters.
OMENUDisplay of the Main Menu.In certain countries, this control is deactivated while the ve-hicle is moving.
P1- 6
Radio source:Short press: Recall of pre-set stations.Long press: Memorisation.CD changer source: Selecting a CD.
QDARK
Short successive presses:
One press: Display of radio, time and temperature only.Two presses: Display off (blank display).Three presses: Return to the standard display.
RMODESelection of the type of information shown on multifunction display.
SCD changer.
Page 120 of 231
124
IV
On / Off
With the key in Drive position M, press on control A to switch the radio on or off.Note:If the radio was on the last time you switched off the ignition, it will resume automatically when you switch on the ignition again. You will not have to press on control A.
After switching off the ignition, you can still operate the audio system even without the igni-tion key being present. Simply press on button A. The system will turn itself off after approx.30minutes.
Anti-theft system
This radio is coded in such a way as to function only on your particu-lar vehicle. It would be unusable if installed on any other vehicle.Note: The anti-theft system is automatic and requires no action on your part.
Page 123 of 231
127
IV
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system,.
The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data pro-vides access to various functions described in this chapter, such as: display of the station name, inter- m i t t e n t t r a f fi c i n f o r m a t i o n fl a s h e s or automatic scanning of stations. This enables you to continue lis-tening to your chosen radio station, regardless of the different frequen-cies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best possible reception by continuously looks for any other frequencies on which the selected radio station is broadcast, automatically choosing the fre-quency offering the best reception (if the station broadcasts on more than one transmitter or frequency.
R D S S Y S T E M
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus:Main menu (press button O).
AUDIO menu (press button L).
To activate/deactivate the functions RDS1. Press on button O.2. Select the AUDIO icon using buttons J or M.3. C o n fi r m y o u r c h o i c e w i t h a press on button L.4. Select the sub-menu for the FM waveband, via but-tons J or M . C o n fi r m y o u r choice with a press on button L.5. Select scanning for RDS sta-tions, via buttons J or M.6. Validate your choice with a press on button L.7. Using control L, select/deselect to activate/deactivate the func-tion.8. Validate your choice by select-ing “OK” on the display.
Page 124 of 231
128
IV
Regional search mode
Some stations, when they are organised in networks, broadcast regional programmes at certain times of day, and national pro-grammes at other times.
It is possible to search.Either for a regional station only.
Or across the whole network i n o r d e r t o fi n d a d i f f e r e n t p r o -gramme.
To activate/deactivate this function, proceed as for Scanning of RDS stations.Note: When this mode is activated, the system will remain tuned to one s p e c i fi c r e g i o n a l s t a t i o n .
T A t r a f fi c i n f o r m a t i o n ( t r a f fi c announcements)
Some stations allow broadcast-ing, only in FM, of these messages thanks to the “TA” function.
You can activate the “TA” func-tion by pressing on button I. This allows you, even though you are listening to another audio source or to a radio programme not itself p r o v i d i n g t r a f fi c m e s s a g e s , t o r e c e i v e t r a f fi c i n f o r m a t i o n fl a s h e s from an FM station which broad-casts them.
Page 125 of 231
129
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source (CD already inserted), press button D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the Baudio system will automatically switch to radio source.
If the CD is not removed within 10 to 15 seconds of being ejected, it will auto-matically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next Ktrack.
Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previous track.
Press the buttons successively to skip several tracks at a time.
You can also perform this operation using button G or button 9 at the steer-9ing wheel.
When the track listing is displayed, select the desired track using buttons Jor M then validate with button L.
C D S O U R C E
You can also do this via the controls 7and 8 at the steering wheel.8
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button K or KN, respectively for fast forward or rapid reverse with accelerated sound.
You can also do this via the controls 7and 8 at the steering wheel.8
Play resumes as normal when the but-ton is released.
Menu
This menu allows activation/deactiva-tion of two options: P l a y b a c k o f t h e fi r s t 7 s e c o n d s (approx.) of each track of the CD.Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button O and Oproceeding as for Scanning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing onbutton L. You can then access the Audio menu.Note: If one of these options is active, it remains active for CD changer source.
Page 126 of 231
130
IV
MP3 CDs
The MP3 format (MPEG 1,2 & 2,5 Audio Layer 3) is an audio compres-sion standard that permits recording o f 1 0 t i m e s a s m a n y m u s i c a l fi l e s o n one CD.
Y o u r r a d i o o n l y p l a y s b a c k fi l e s w h i c h have the extension “.mp3”. Other types o f fi l e s ( . w a v , . m p g 4 , . o g g , m i d i . . . ) c a n -not be played back.
When you insert an MP3 CD, the radio searches all the musical tracks. Playback may require some tens of seconds before starting.
Playback of the MP3 CD is optimised if the level of the cover is limited to 2.
Burning format
Some burnt CDs cannot be read by your equipment (quality, speed of recording, etc.).
When you burn a CD-R or CD-RW, select the burning standard ISO 9660 level 1,2 or Joliet. Playback of other formats may not occur correctly.
Use the Joliet standard to burn multi-session CDs.
On a given CD, always use the same burning standard.
To obtain the best possible acous-tic quality, select the lowest burning speed.
It can handle transmission speeds of 8 to 320 kbits/s and playback of 22,05 to 44,1 kHz.
M P 3 C D S O U R C E
MP3 CD player
Your Audio CD system may be MP3 compatible.
As you insert a CD recorded in MP3 format, playback starts of the fi r s t s o n g o f t h e fi r s t C D - c o v e r .
You can select a particular track by using buttons N or K and CD-cov-ers using buttons J or M.
To select a track
To display the list of CD-covers, press on button G.
Use buttons J or M to select the CD-cover you wish to listen to.
To open a CD-cover, press L.
Use buttons N or K to select the track you wish to listen to.
Validate with a press on L.
Menu
This menu is for activation/deacti-vation of three options: P l a y b a c k o f t h e fi r s t 7 s e c o n d s (approx.) of each track of the CD.
Repetition of the current CD-cover.Random playback of CD-cover tracks by CD-cover.
This can be accessed in two ways:Either by pressing button Oand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing onbutton L. You can then access the Audio menu.
Page 129 of 231
133
IV
Main Menu
Press on the Menu button O to access to Main menu, then select the “Telephone” icon using but-tons J ou M), then validate the selection via button L.
You have access:To the Directory.
T o C o n fi g u r a t i o n .To Communication Manage-ment.
You access your choices via (Jou M), then you validate them with a press on L.
This main menu can also be accessed by pressing button Ethen button L.
Folder
This menu lets you open:The telephone Directory of the telephone that is connected.The Calls List.
Telephone directory
The starting of a telephone call can be done independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J or M, then vali-date with a press on L.
Page 130 of 231
134
IV
B L U E T O O T H®
Voice recognition
Pressing on the end of the lighting control stalk 10 starts telephone voice recognition.
Voice recognition allows you to make a call to a number for which you have recorded a label on the mobile telephone that is twinned and connected.
Remark:
It is possible to stop the call, pro-vided the dialling has not yet com-menced, with a short press on the end of the lighting control stalk 10.
Remarks:While you are on a call, the audio source currently being listened to is paused.
Some ring tones on your mobile telephone may not be recog-nised by the Bluetooth®not be recog-not be recog- system ®
on your vehicle. A different ring tone will be chosen by the sys-tem.