A
B
146III
The pneumatic suspension has an additional function
associated with it : the possibility to raise or lower the
height of the rear of the vehicle when stationary, in or-
der to facilitate loading / unloading of the boot.
TO INCREASE THE HEIGHT OF THE BOOT
SILL
- Press continuously at the top of the control
A, which
is located in the boot, on the left-hand side.
This action will be accompanied by a sound signal.
You can stop the movement at any time by releasing
the control.
3 b e e p s w i l l c o n fi r m t h a t t h e m o v e m e n t h a s g o n e a s f a r
as it can
.
To return to the nominal height :
- P r e s s b r i e fl y t w i c e a t t h e b o t t o m o f t h e c o n t r o l A.
TO DECREASE THE HEIGHT OF THE BOOT SILL
- Press continuously at the bottom of the control A.
This action will be accompanied by a sound signal.
You can stop the movement at any time by releasing
the control.
3 b e e p s w i l l c o n fi r m t h a t t h e m o v e m e n t h a s g o n e a s
far as it can.
To return to the nominal height :
- P r e s s b r i e fl y t w i c e a t t h e t o p o f t h e c o n t r o l A.
Note :
- if you start the vehicle without having returned it to the nominal height, the automatic correction will ac-tivate as soon as the vehicle starts to move. during
the correction, the SERViCE warning lamp lights up and a message on the screen reminds you not to ex-
ceed 10 km/h (6 mph).
- The loading assistance does not function in the fo l-
lowing instances:
- if the button B
is lit up,
- in power economy mode.
-
W h e n y o u fi r s t u s e t h e f u n c t i o n , p r e s s f o r t w o s e c o n d s o n
the control A to initialise the system. All subsequent ac-
tions will be followed immediately by the desired r esults
.
Driving with the boot sill in a low position may damage the components located under the bodyshell.
Grand C4 Picasso C4 Picasso
L o A d i N G A S S i S TA N C E