Page 125 of 201
1
3
4
2
2
1
V
1 2 2
C H A N G I N G B U L B S
HEADLAMP UNIT1: Dipped beam2: Main beam3: Sidelamp4: Direction indicatorNote: A light misting may appear on the headlamp surface in certain conditions of use.
Dipped beam
Tilt the metallic spring holding the fl a p g i v i n g a c c e s s t o t h e l a m p bulbs.
O p e n t h e a c c e s s fl a p .
Disconnect the connector.
Disengage the retaining spring.
Take out the bulb.
Bulb: H7
Main beam
Tilt the metallic spring holding the fl a p g i v i n g a c c e s s t o t h e l a m p bulbs.
O p e n t h e a c c e s s fl a p .
Disconnect the connector.
Press and disengage the bars 1and 2.
Take out the bulb.
Bulb: H1
Front foglamps
Bulb: H1
Page 126 of 201
V
1 2 3
C H A N G I N G B U L B S
Front direction indicator
Tilt the metallic spring holding the fl a p g i v i n g a c c e s s t o t h e l a m p bulbs.
O p e n t h e a c c e s s fl a p .
Rotate the bulb- holder a quarter turn and pull.
Take out the bulb.
Bulb: PY 21 W (yellow)
Sidelamp
Tilt the metallic spring holding the fl a p g i v i n g a c c e s s t o t h e l a m p bulbs.
O p e n t h e a c c e s s fl a p .
Rotate the bulb- holder a quarter turn and pull.
Bulb: W5
Side repeater direction indi-cator
To change the direction indicator side repeater, push it forwards or rearwards to detach it, then pull it towards you.
Hold the cable and disconnect it.
Contact a CITROËN dealer.
Page 127 of 201
V
1 2 4
C H A N G I N G B U L B S
Interior lamp
Unclip the transparent cover of the interior lamp to reach the bulb.
Bulb: W 5 W
Spotlamps
Unclip the transparent cover of the interior lamp to reach the bulb.
Bulb: W 5 W
Boot lamp
Unclip the lens unit to access the bulb.
Bulb: W 5 W
Page 128 of 201
4
3
1
2
V
1 2 5
Rear lamp unit
Identify the failed bulb.
Bulbs:1: Stop-lamps and sidelamps: P 21 W / 5 W2: Direction indicator: PY 21 W3: Reversing lamp: P 21 W4: Foglamp: P 21 W
Removal
Unclip the nut cover on the exterior fi x i n g .
U n d o t h e 2 n u t s ( 1 o u t e r a n d 1 inner).
In the side storage compartment, unclip the lamp holder and discon-nect the connector to access the bulb.
R e fi t t h e a s s e m b l y a f t e r r e p l a c i n g the bulb.
C H A N G I N G B U L B S
Page 129 of 201
V
1 2 6
C H A N G I N G B U L B S
Third stoplamp
To access the bulb, open the tail-gate and press on the two metallic springs through the two holes that are provided for this purpose in the tailgate inner panel.
W h e n r e fi t t i n g , e n s u r e t h a t t h e b u l b i s fi r m l y s e c u r e d i n p l a c e .
Bulb: W 16 W
Number plate
Unclip the lens then pull the bulb- holder.
Bulb: W 5 W
After each operation, check that the lamps work.
