Page 85 of 201
III
8 2
V E N T I L A T I O N - A I R C O N D I T I O N I N G
Air inlet
Check that the exterior grille for the air inlet, at the bot-tom of the windscreen, is clean and free of dead leaves, snow, etc.
If washing the vehicle with a high pressure jet, avoid targeting the air inlet zone.
Air vents
The air vents to the face (except the central air vent) h a v e g r i l l e s f o r o r i e n t i n g t h e fl o w o f a i r ( u p - d o w n , r i g h t -left).
Air circulation
For your comfort we advise you to maintain a proper distribution of air within the cabin, both at the front and at the rear.
Air outlets are also located on the central console close to the gear lever, to enhance comfort for the rear pas-sengers.
P o l l e n fi l t e r – O d o u r fi l t e r
Y o u r i n s t a l l a t i o n h a s a fi l t e r f o r k e e p i n g o u t d u s t .
T h i s fi l t e r h a s t o b e c h a n g e d a c c o r d i n g t o t h e v e h i c l e maintenance schedule. See “Maintenance Guide”.
Air conditioning
Whatever the time of year, even in cool weather the air conditioning is useful in removing humidity and mist-ing.
To keep the air conditioning compressor well sealed, it is essential to operate the air conditioning at least once in every month.
To be effective, the air conditioning should only be used with the windows closed.
If you are towing a heavy trailer and outside tempera-tures are high, the air conditioning may be temporarily paused if the engine cooling requires this.
Water arising from condensation in the air conditioning system is evacuated through a hole provided for this purpose ; a pool of water may thus form underneath the vehicle when stationary.
You are advised to have the air conditioning system checked on a regular basis. See “Maintenance Guide”.
The air conditioning operates by using power from the engine. This results in a slight increase in fuel con-sumption.
Demisting - deicing of the wind-screen and front side windowsPlace the controls for temperature and a i r fl o w o n m a x i m u m .
Close the central air vents.
Operate the air conditioning.Note: You should not be in air recirculation.
Page 133 of 201
2
4
5
16
3
V
1 3 0
C H A N G I N G A W H E E L
Removal1. P a r k t h e v e h i c l e o n s t a b l e , fi r m g r o u n d t h a t i s n o t s l i p p e r y . A p p l y t h e parking brake. S w i t c h o f f t h e i g n i t i o n a n d e n g a g e fi r s t g e a r o r r e v e r s e g e a r , d e p e n d i n g on any slope.2. Position the jack at one of the four jacking-points provided on the sub-frame close to the wheels. Using the handle, unwind the jack until it reaches the ground.3. To unclip the wheel embellisher, pull using the end of the wheelbrace as a lever in one of the apertures.For vehicles with aluminium wheel rims:With a central embellisher, remove the embellisher, using the tool, to access the bolts.With wheel bolts visible, simply undo them.4. Continue to extend the jack until the wheel is a few centimetres off the ground.5. Undo the other bolts, remove the wheel.
-
-
Tools1. J a c k2. Wheelbrace3. Central embellisher removing tool for accessing the wheel bolts (For vehicles with aluminium wheel rims).4. Socket for anti- theft bolts (For vehicles with aluminium wheel rims).5. Tool for removing wheel bolt protectors (For vehicles with alumin ium wheel rims).6. Movable towing eye.
Page 135 of 201
T O W I N G – L I F T I N G
Towing with wheels on the ground
T o w i n g e y e fi x i n g s a r e l o c a t e d a t t h e f r o n t a n d a t t h e r e a r o f t h e v e h i c l e .
To access them:Carefully lift the access cover.
Release it by pressing on the lower part.
A lug keeps the cover attached to the bumper, so that it do es not become lost.
The ignition key must be in position M to retain steering.
Use a bar with attachments to the towing eyes as above.
Page 138 of 201
VI
1 3 5
G E N E R A L
SaloonEntreprise
HDi 70BVMHDi 70BVMP1.6 HDi 92BVM1.6 HDi 110BVM FAP1.1iBVMHDi 70BVM1.6 HDi 92BVM
A p p r o x i m a t e l y 4 7 l i t r e s
Diesel fuelUnleaded petrol R O N 9 5 - R O N 9 8Diesel fuel
1 0 . 4 5 1 0 . 4 5 1 1 . 5 5 1 1 . 5 5 1 0 . 4 5 1 0 . 4 5 1 1 . 3 0
4 4 5 6 6 6 6
1 6 5 ( 1 0 3 ) 1 6 5 ( 1 0 3 ) 1 8 0 ( 1 1 2 ) 1 9 0 ( 1 1 8 ) 1 5 7 ( 9 8 ) 1 6 5 ( 1 0 3 ) 1 8 0 ( 1 1 2 )
1 0 2 2 1 0 2 2 1 0 8 8 1 1 2 7 1 0 1 2 1 0 4 9 1 0 9 3
1 5 3 9 1 5 4 3 1 5 7 9 1 6 0 1 1 4 8 7 1 5 3 0 1 5 7 3
8 2 0 8 2 0 8 2 0 8 2 0 8 2 0 8 2 0 8 2 0
2 4 3 9 2 4 4 3 2 4 7 9 2 5 0 1 2 1 3 7 2 4 3 0 2 4 7 3
1 1 6 0 1 1 6 0 1 1 6 0 1 1 6 0 6 5 0 9 0 0 9 0 0
5 6 0 5 7 0 5 8 0 6 0 0 5 2 0 5 6 0 5 8 0
4 7 4 7 4 7 4 7 2 6 3 6 3 6
6 0
1 7 5 / 6 5 R 1 4 - 1 8 5 / 6 0 R 1 5 - 1 9 5 / 5 0 R 1 6
MAV: Unladen weight.
MTAC: Gross vehicle weight.
CMAE AR: Maximum weight on rear axle.
MTRA: Gross train weight.
Weights: Refer to the manufactur-er's plate.
BVM: Manual gearbox.
BVMP: Electronic Gearbox System.
BVA: Automatic gearbox.
FAP: D i e s e l p a r t i c u l a t e fi l t e r s y s t e m .
Observe your vehicle's towing limits.
It is essential to comply with the max. Gross Trailer Weights and s p e e d l i m i t s a s s p e c i fi e d b y l e g i s -lation in each country.
For further information about the towing capacity of your vehicle and its max. authorised Gross Train Weight, contact a CITROËN dealer.
