2006 YAMAHA YFM700R oil

LOCATION OF THE WARNING AND
SPECIFICATION LABELS ..................1-1
SAFETY INFORMATION ..................... 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION ............................... 3-1
Identification number records ............. 3-3
Key identification number ................... 3-5
Vehicle identification number ............. 3-5
Model label ......................................... 3-7
CONTROL FUNCTIONS ...................... 4-1
Main switch ......................................... 4-1
Indicator and warning lights ................ 4-3
Handlebar switches ............................ 4-9
Throttle lever .................................... 4-13
Speed limiter .................................... 4-15
Clutch lever ...................................... 4-17
Brake lever ....................................... 4-17Brake pedal ...................................... 4-19
Parking brake lever .......................... 4-21
Shift pedal ........................................ 4-25
Reverse knob ................................... 4-25
Fuel tank cap .................................... 4-27
Seat .................................................. 4-29
Front shock absorber adjustment ..... 4-31
Adjusting the rear shock absorber .... 4-33
PRE-OPERATION CHECKS ................ 5-1
Front and rear brakes ......................... 5-7
Fuel .................................................. 5-13
Engine oil .......................................... 5-17
Coolant ............................................. 5-19
Chain ................................................ 5-23
Throttle lever .................................... 5-23
Tires ................................................. 5-25
How to measure tire pressure .......... 5-29
Tire wear limit ................................... 5-31
Fittings and fasteners ....................... 5-31
EBU00150
CONTENTS
1
2
3
4
5
1S3-9-60 1-3 4/27/05 3:11 PM Page 12

Lights ................................................ 5-31
Switches ........................................... 5-31
OPERATION ........................................ 6-1
Starting the engine ............................. 6-3
Reverse knob operation and reverse
driing ................................................. 6-9
Shifting ............................................. 6-13
To start out and accelerate ............... 6-15
To decelerate ................................... 6-19
Engine break-in ................................ 6-21
Parking ............................................. 6-25
Parking on a slope ............................ 6-27
Accessories and loading .................. 6-31
RIDING YOUR ATV .............................. 7-1
GETTING TO KNOW YOUR ATV ...... 7-3
RIDE WITH CARE AND GOOD
JUDGEMENT ................................... 7-5
BE CAREFUL WHERE YOU RIDE ... 7-27
TURNING YOUR ATV ...................... 7-41CLIMBING UPHILL .......................... 7-47
RIDING DOWNHILL ......................... 7-57
CROSSING A SLOPE .......................7-61
CROSSING THROUGH SHALLOW
WATER .......................................... 7-65
RIDING OVER ROUGH TERRAIN ....7-69
SLIDING AND SKIDDING .................7-71
WHAT TO DO IF ... ...........................7-75
WHAT TO DO ... .............................. 7-75
PERIODIC MAINTENANCE AND
ADJUSTMENT ................................... 8-1
Owner’s manual and tool kit ............... 8-3
PERIODIC MAINTENANCE/
LUBRICATION .................................. 8-7
Panel removal and installation ......... 8-19
Engine oil and oil filter element ........ 8-21
Cooling system ................................. 8-37
Changing the coolant ....................... 8-41
Spark plug inspection ....................... 8-49
Air filter element cleaning ................. 8-55
6
7
8
1S3-9-60 1-3 4/27/05 3:11 PM Page 13

3-1
EBU00320
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Seat 9. Clutch lever
2. Headlight 10. Parking brake lever
3. Brake pedal 11. Main switch
4. Engine oil tank 12. Brake lever
5. Coolant reservoir 13. Throttle lever
6. Idle adjusting screw 14. Reverse knob
7. Tail/brake light 15. Fuel tank cap
8. Shift pedal 16. Handlebar switches
NOTE:
The machine you have purchased may differ
slightly from those shown in the figures of this
manual.
12
3
e y
r t 0q
w 9
8
6745
1S3-9-60 1-3 4/27/05 3:11 PM Page 3-1

4-41
NOTE:
Although the total number of clicks of a damping
force adjusting mechanism may not exactly
match the above specifications due to small dif-
ferences in production, the actual number of
clicks always represents the entire adjusting
range. To obtain a precise adjustment, it would
be advisable to check the number of clicks of
each damping force adjusting mechanism and to
modify the specifications as necessary.
w
Suspension components become hot during
operation. Never touch the compression
damping adjusting screw, the rebound
damping adjusting screw or the oil reservoir
with your bare hand or skin until suspension
components have cooled.
1S3-9-60 4 6/7/05 9:37 AM Page 4-41

5-1
EBU01130
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brake9Check operation, free play, fluid level and fluid leakage. 5-7–5-11
9Fill with DOT 4 brake fluid if necessary. 8-71–8-81
Rear brake9Check operation, free play, fluid level and fluid leakage. 5-7–5-11
9Fill with DOT 4 brake fluid if necessary. 8-71–8-81
Clutch9Check operation, condition and lever free play. 8-89
Parking brake9Check operation, condition and cable length. 8-83–8-85
Fuel 9Check fuel level.
9Fill with fuel if necessary.5-13–5-15
Engine oil9Check oil level.
9Fill with oil if necessary.5-17, 8-21
Coolant reservoir 9Check coolant level in reservoir.
9Fill with coolant if necessary.5-19, 8-37–8-47
Drive chain9Check chain slack and condition.
9Adjust if necessary.5-23, 8-91–8-99
Throttle9Check for proper throttle cable operation and free play. 5-23, 8-69
Wheels and tires9Check tire pressure, wear and damage. 5-25–5-31, 8-111–8-113
Fittings and fasteners9Check all fittings and fasteners. 5-31
Lights and switches9Check for proper operation. 5-31, 8-125–8-131
1S3-9-60 5-6 6/7/05 10:22 AM Page 5-1

5-17
EBU10842
Engine oil
Make sure the engine oil is at the specified level.
Add oil as necessary. (See page 8-21.)
cC
8In order to prevent clutch slippage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do not
use oils with a diesel specification of “CD”
or oils of a higher quality than specified. In
addition, do not use oils labeled “ENERGY
CONSERVING II” or higher.
8Make sure that no foreign material enters
the crankcase.
Recommended engine oil type and quantity:
See page 10-2.
1S3-9-60 5-6 6/7/05 10:22 AM Page 5-17

8-9
INITIAL EVERY
month 1 3 6 6 12
ITEM ROUTINEWhichever
km 320 1200 2400 2400 4800 comes first
(mi) (200) (750) (1500) (1500) (3000)
hours 20 75 150 150 300
9Check operation.
Steering system*9Repair if damaged.
22222
9Check toe-in.
9Adjust if necessary.
Engine oil9Replace (Warm engine before draining).2 222
Engine oil filter
9Replace.222
element
9Check coolant leakage.
Cooling system9Repair if necessary.22222
9Replace coolant every 24 months.
9Check operation.
Lights and switches*
9
Adjust headlight beams.22222
1S3-9-60 8 6/7/05 10:25 AM Page 8-9

8-10
NOTE:
8Recommended brake fluid: DOT 4
8Brake fluid replacement:
9When disassembling the master cylinder or caliper cylinder, replace the brake fluid. Normally
check the brake fluid level and add the fluid as required.
9On the inner parts of the master cylinder and caliper cylinder, replace the oil seals every two
years.
9Replace the brake hoses every four years, or if cracked or damaged.
1S3-9-60 8 6/7/05 10:25 AM Page 8-10